Tuesday (27.09.2016)

10:45
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.1: Bio-Interfaces and Antimicrobial Biomaterials I
Session starts at 10:45 Keynote Lecture
Self-regenerating Antimicrobial Surfaces – Towards a Technology Platform for New Materials and Devices

Dr. Karen Lienkamp Dr. Franziska Dorner

11:15
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.1: Bio-Interfaces and Antimicrobial Biomaterials I
Session starts at 10:45 Lecture
Nano contact points control initial microbial adhesion on biomaterials surfaces

Carolin Dewald Dr. Claudia Lüdecke-Beyer Dr. Martin Roth Dr. Jörg Bossert Prof. Dr. Klaus D. Jandt

11:30
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.1: Bio-Interfaces and Antimicrobial Biomaterials I
Session starts at 10:45 Lecture
Copper materials for infection prevention in hospitals and on the ISS

Jiaqi Luo Dr. Michael Hans Dr. Ralf Möller Prof. Dr. Frank Mücklich

11:45
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.1: Bio-Interfaces and Antimicrobial Biomaterials I
Session starts at 10:45 Lecture
Primary Adhesion of Bacteria on Plasma Modified Polycarbonate

Nathalie Stefani Kerstin Lohbauer Philipp Häfner Prof. Dr. Hans-Achim Reimann

12:00
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.1: Bio-Interfaces and Antimicrobial Biomaterials I
Session starts at 10:45 Lecture
Antibacterial activity of durable micro- and nano-scale Titanium surfaces generated via ultra-short pulsed laser ablation

Dipl.-Ing. Rocio Ortiz Dr. Iban Quintana

14:30
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.2: Bio-Interfaces and Antimicrobial Biomaterials II
Session starts at 14:30 Lecture
Controlled release of antibacterial agents and anti-inflammatories from Alginate-Chitosan coated silicone based hydrogels

Ph.D. Diana Silva Dr. Luís F. V. Pinto Prof. Dr. Luís F. Santos Prof. Dr. Ana Paula Serro Prof. Dr. Benilde Saramago

F06: Biomaterials for Tissue Engineering
F06.1: Session 1
Session starts at 14:30 Keynote Lecture
Morphogenetically active biomaterials: An end to end solution for dental and orthopedic bone regeneration

Prof. Dr. Werner E.G. Müller Prof. Dr. Xiaohong Wang

14:45
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.2: Bio-Interfaces and Antimicrobial Biomaterials II
Session starts at 14:30 Lecture
Antimicrobial and Protein-resistant Polymer Coatings for Materials Applications

Dr. Karen Lienkamp Maria Vöhringer Julia S. Saar Wibke Hartleb Monika Kurowska Prof. Dr. Ali Al-Ahmad

15:00
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.2: Bio-Interfaces and Antimicrobial Biomaterials II
Session starts at 14:30 Lecture
Bioinspired fabrication of conducting SnO2 film on polymeric substrates

Dr. Boukerma Kada

F06: Biomaterials for Tissue Engineering
F06.1: Session 1
Session starts at 14:30 Lecture
Studies the effect of silver hydroxyapatite on Osteoblast cell as a potential material for bone regeneration applications

Dr. Nida Iqbal Prof. M. R. Abdul Kadir Dr. Krishnamurithy gand Prof. Kamaru Tunku

15:15
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.2: Bio-Interfaces and Antimicrobial Biomaterials II
Session starts at 14:30 Lecture
Controlling cell surface interaction for the study of cancer.

Dr. Graham Hickman Prof. Carole Perry Prof. Graham Pockley Dr. David Boocock Prof. Robert Rees Matthew Nicklin

F06: Biomaterials for Tissue Engineering
F06.1: Session 1
Session starts at 14:30 Lecture
High-strength bioresorbable ?-TCP-(Fe-Ag) nanocomposite scaffolds for bone repair

Dr. Sanjaya Kumar Swain Dr. R. Unger Dr. Irena Gotman Prof. E.Y. Gutmanas

15:30
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.2: Bio-Interfaces and Antimicrobial Biomaterials II
Session starts at 14:30 Lecture
Plasma Electrolytic Oxidation treatment of magnesium surfaces: a study in biocompatibility.

M.Sc. Dario Porchetta Alexander Kopp Ole Jung Christoph Ptock Lisa Lauts Dr. Philip Hartjen

F06: Biomaterials for Tissue Engineering
F06.1: Session 1
Session starts at 14:30 Lecture
Anisotropic mechanical behavior of rod-macroporous biocompatible hydrogels: physicochemical and mechanical characterization.

Prof. Dr. Cesar Barbero Dr. Rebeca Rivero Dr. Fabrisio Alustiza Dr. Nancy Rodríguez Prof. Dr. Pablo Bosch Prof. Dr. Maria Cristina Miras Dr. Claudia Rivarola

15:45
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.2: Bio-Interfaces and Antimicrobial Biomaterials II
Session starts at 14:30 Lecture
Material Characterization and In Vitro Cell Studies on Keratin Coatings for Titanium Prosthesis

Alexis Trent

F06: Biomaterials for Tissue Engineering
F06.1: Session 1
Session starts at 14:30 Lecture
Enhanced cell affinity of PHBV nanofiber mats with plasma treatment and silk impregnation

Ph.D. Irem Unalan Oylum Colpankan Dr. Aylin Ziylan Cansu Gorgun Dr. Aylin Sendemir Urkmez

16:30
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.3: Bio-Interfaces and Antimicrobial Biomaterials III
Session starts at 16:30 Keynote Lecture
Design and applications of functional peptide nanofibers

Dr. Gang Wei Prof. Dr. Zhiqiang Su

F06: Biomaterials for Tissue Engineering
F06.2: Bio-based Materials and Applications
Session starts at 16:30 Lecture
New Polysaccharide Bioplastics Prepared from Red Algae

Susana Guzman-Puyol Dr. José Alejandro Heredia-Guerrero Dr. Luca Ceseracciu Prof. Dr. Roberto Cingolani Dr. Ilker Bayer Dr. Athanassia Athanassiou

16:45
F06: Biomaterials for Tissue Engineering
F06.2: Bio-based Materials and Applications
Session starts at 16:30 Lecture
Wool keratins, a protein platform for multifunctional materials

Dr. Giovanni Perotto Dr. Tommaso Avellini Anatolii Polovitsyn Dr. Iwan Moreels Dr. Teresa Pellegrini Dr. Athanassia Athanassiou

17:00
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.3: Bio-Interfaces and Antimicrobial Biomaterials III
Session starts at 16:30 Lecture
Autodeposition of Eumelanin Nanoparticles via Enzymatic in situ Synthesis

Dr. Oliver Strube

F06: Biomaterials for Tissue Engineering
F06.2: Bio-based Materials and Applications
Session starts at 16:30 Lecture
Photochromic composite silk fibroin nanofibers for acid and ion sensing applications

Maria Erminia Genovese Dr. Despina Fragouli Dr. Athanassia Athanassiou

17:15
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.3: Bio-Interfaces and Antimicrobial Biomaterials III
Session starts at 16:30 Lecture
Nanostructuring via Enzyme Mediated Autodeposition

Arne Rüdiger Dr. Oliver Strube Prof. Dr. Wolfgang Bremser

F06: Biomaterials for Tissue Engineering
F06.2: Bio-based Materials and Applications
Session starts at 16:30 Lecture
Synthesis and In-Vitro Evaluation of Soft Polymersomes for Efficient Intracellular Drug Delivery

Tsuf Croitoru-Sadger

17:30
F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.3: Bio-Interfaces and Antimicrobial Biomaterials III
Session starts at 16:30 Highlight Lecture
Insights into the use of specific metal binding of self-assembling S-layer proteins

Dr. Manja Vogel Björn Drobot Dr. Tobias Günther Falk Lehmann Dr. Ulrike Weinert Dr. Katrin Pollmann Dr. Johannes Raff

F06: Biomaterials for Tissue Engineering
F06.2: Bio-based Materials and Applications
Session starts at 16:30 Lecture
A New Approach for Molecular Self-assembly and Drug Delivery

Rawan Omar

17:45
F06: Biomaterials for Tissue Engineering
F06.2: Bio-based Materials and Applications
Session starts at 16:30 Lecture
Optimal doses of bortezomib - a new local treatment strategy against multiple myeloma

Dr. Seemun Ray Dr. Ulrich Thormann Dr. Thaqif El Khassawna Dr. Ursula Sommer Prof. Dr. Michael Gelinsky Prof. Dr. Thomas Hanke Dr. Anja Henss Dr. Marcus Rohnke Prof. Dr. Christian Heiss Prof. Dr. Volker Alt

Wednesday (28.09.2016)

09:15
F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.1: Session 1
Session starts at 09:15 Highlight Lecture
Porous iron-silver nanocomposites as biodegradable load-bearing scaffolds in medical applications

Prof. Elazar Gutmanas Aliya Sharipova Prof. Sergey Psakhie Dr. Sanjaya Swain Dr. Ronald Unger Prof. Irena Gotman Prof. Irena Gotman Dr. David Starosvetsky

F07: Polymeric Materials
F07.1: Composites
Session starts at 09:15 Lecture
Low-formaldehyde long woodchip plastic composites – a novel biobased material for high preformance applications

M. Sc Robert Hartmann Stefan Caba Prof. Dr. Michael Koch

09:30
F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.1: Session 1
Session starts at 09:15 Lecture
Effects of sulphur addition on microstructure and mechanical behavior of Fe-Mn-C TWIP alloys for biomedical application

Prof. Dr. Julia Kristin Hufenbach Dr. Horst Wendrock Dr. Lars Giebeler Andrea Voß Dr. Anja Lode Prof. Dr. Michael Gelinsky Dr. Uta Kühn Dr. Annett Gebert

F07: Polymeric Materials
F07.1: Composites
Session starts at 09:15 Lecture
Study of polyethylene composites containing lignocellulosic fillers

Franciszek Pawlak Bartosz Gackowski Robert Pobiedzinski

09:45
F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.1: Session 1
Session starts at 09:15 Lecture
High strength Mg alloys for implant applications

Dr. Jelena Horky Dr. Michael Humenberger Dr. Maciej Krystian Dr. Bernhard Mingler

F07: Polymeric Materials
F07.1: Composites
Session starts at 09:15 Lecture
Acetylation and Crystalline Structure of ?-Chitin from Marine Invertebrates

Oluwashina Gbenebor Dr. Samson Adeosun Prof. Ganiyu Lawal san Jun Samuel Olaleye

10:00
F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.1: Session 1
Session starts at 09:15 Lecture
Solid solution treatment on strength and corrosion of biodegradable Mg-Ag wires

Prof. Dr. Petra Maier Fabian Zimmermann Raimund Peters Dr. Norbert Hort Prof. Dr. Carla Vogt

F07: Polymeric Materials
F07.1: Composites
Session starts at 09:15 Lecture
Challenges of lightweight construction with polymer-metal-hybrid parts

Jan-Michael Geck Prof. Hans-Peter Heim Jan-Michael Geck

10:15
F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.1: Session 1
Session starts at 09:15 Lecture
Influence of surface treatment on the tensile properties of annealed Mg10Gd-alloy wires

Marco Bartosch Heiner Peters Dr. Boris Schmitt Prof. Dr. Felix Berger Dr. Norbert Hort Prof. Dr. Frank Witte

F07: Polymeric Materials
F07.1: Composites
Session starts at 09:15 Lecture
Finite element simulations for characterization of the composite material behavior of aluminium-polymer-laminate foils used for stretch forming pharmaceutical packaging

Simon Mueller Prof. Dr. Sabine M. Weygand

10:30
F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.1: Session 1
Session starts at 09:15 Lecture
MgZnCa-lean alloys as temporary implant material for osteosynthesis

Martina Cihova Dr. Johannes Eichler Dr. Elisabeth Martinelli Dr. Leopold Berger Prof. Dr. Peter J. Uggowitzer Prof. Dr. Annelie M. Weinberg Prof. Dr. Jörg F. Löffler

F07: Polymeric Materials
F07.1: Composites
Session starts at 09:15 Lecture
Study the effect of the thickness on the epoxy on the properties of the coating of tri-layers for steel pipelines

Dr. Benalia Kouini Prof. Aicha Serier

11:15
F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.2: Session 2
Session starts at 11:15 Highlight Lecture
Bone mineralization and degrading Mg implants – Can we determine the nanostructural response and the fate of degradation products with multi-modal synchrotron x-ray imaging?

Tilman Gruenewald Dr. Harald Rennhofer Martin Meischel Vicki Nue Dr. Bernhard Hesse Dr. Manfred Burghammer Dr. Thomas Huthwelker Prof. Dr. Henrik Birkedal Prof. Dr. Annelie Weinberg Prof. Dr. Jörg Löffler Prof. Dr. Stefanie Stanzl-Tschegg Prof. Dr. Helga Lichtenegger

F07: Polymeric Materials
F07.2: Polymer Fundamentals
Session starts at 11:15 Lecture
Melt processed polymer nanocomposites with mixed filler systems for thermoelectric applications

Dr.-Ing. Petra Pötschke Dr. Jinji Luo Dr. Beate Krause Dr. Marco Liebscher

11:30
F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.2: Session 2
Session starts at 11:15 Lecture
Quantitative characterization of physiological degradation processes in situ by means of a bioreactor coupled flow chamber using timelapse SRµCT

Dr. Jörg U. Hammel Dr. Frank Feyerabend Thomas Dose Alexander Hipp Dr. Fabian Wilde Dr. Felix Beckmann

F07: Polymeric Materials
F07.2: Polymer Fundamentals
Session starts at 11:15 Lecture
Electro-mechanical instability of viscous dielectric elastomer actuators under prestretch

Dipl.-Ing. Dagmar Eder-Goy Ying Zhao Prof. Bai-Xiang Xu

11:45
F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.2: Session 2
Session starts at 11:15 Lecture
Cell adhesion on surface-functionalized magnesium

Dr.-Ing. Victoria Wagener Prof. Dr. Sannakaisa Virtanen

F07: Polymeric Materials
F07.2: Polymer Fundamentals
Session starts at 11:15 Lecture
Effect of high-intensity irradiance on Poly(lactic acid) under various aging conditions

Prof. Dr. Jörg Meyer Prof. Dr. Jörg Meyer Dr. Frank Tappe Prof. Dr. Klaus Huber

12:00
F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.2: Session 2
Session starts at 11:15 Lecture
Magnesium and its effect on human osteoclasts and osteoblasts differentiation

Dr. Berengere Luthringer Lili Wu Dr. Frank Feyerabend Prof. Dr. Arndt Schilling Prof. Dr. Regine Willumeit-Römer

F07: Polymeric Materials
F07.2: Polymer Fundamentals
Session starts at 11:15 Lecture
Fog Harvesting Surfaces of Polydimethylsiloxane (PDMS) Islands on Superomniphobic Electrospun Nanofibers

Alexander Davis Dr. Ilker S. Bayer Dr. Athanassia Athanassiou

12:15
F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.2: Session 2
Session starts at 11:15 Lecture
On the determination of magnesium degradation rates under physiological conditions

Dipl.-Ing. Eshwara Phani Shubhakar Nidadavolu Dr. Frank Feyerabend Dr. Thomas Ebel Prof. Dr. Regine Willumeit-Römer Prof. Dr. Michael Dahms

F07: Polymeric Materials
F07.2: Polymer Fundamentals
Session starts at 11:15 Lecture
Bioinspired composite pillar structures for enhanced adhesion on rough surfaces

Dr.-Ing. Sarah Fischer Dr. René Hensel Prof. Dr. Eduard Arzt

12:30
F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.2: Session 2
Session starts at 11:15 Lecture
Optimization of PEO synthesis parameters for the production of corrosion resistant ceramic coatings on Mg-Ca-Zn alloys.

M.Sc. Dario Porchetta Ole Jung Alexander Kopp Christoph Ptock Lisa Lauts Dr. Philip Hartjen

F07: Polymeric Materials
F07.2: Polymer Fundamentals
Session starts at 11:15 Lecture
Smart Solvogels. A new kind of polymeric materials with useful properties

Prof. Dr. Cesar Barbero Maria Victoria Martinez Silvestre Bongiovanni Abel Dr. Claudia Rivarola Prof. Dr. María Cristina Miras

14:45
F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Lecture
Development of a Bone Substitute from Mineralized Phosphate Prestructured Gelatine

Benjamin Kruppke Dr. Christiane Heinemann Claudia Kreschel Sina Rößler Alena Svenja Wagner Prof. Dr. Sabine Wenisch Prof. Dr. Hartmut Worch Dr. Thomas Hanke

15:00
F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Lecture
Development of new beta-Ti alloys for hard tissue replacement

Dr. Stefan Pilz Romy Schmidt André Reck Prof. Dr. Mariana Calin Dr. Ute Hempel Prof. Dr. Jens Freudenberger Prof. Dr. Martina Zimmermann Prof. Dr. Jürgen Eckert Dr. Annett Gebert

15:15
F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Lecture
Injectable strontium-modified calcium phosphate cement for the therapy of osteoporotic bone defects

Dr. Anja Lode Tilman Ahlfeld Prof. Dr. Michael Gelinsky Dr. Matthias Schumacher

15:30
F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Lecture
Development and in vitro activity assessment of novel silicon oxycarbide-based bioactive glasses

Dr. Emanuel Ionescu Dr. Emanuel Ionescu Prof. Dr. Ralf Riedel Prof. Dr. Aldo Boccaccini Prof. Rainer Detsch

15:45
F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Lecture
Is the Sheep the right model for osteoporosis research?

Dr. Thaqif El Khassawna Prof. Dr. Christian Heiss Prof. Dr. Wolfgang Böcker Prof. Dr. Katrin Susanne Lips

16:00
F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Oral Poster
Ehancing Ultra structure preservation of bone tissue - current insights

Dr. Thaqif El Khassawna Prof. Dr. Christian Heiss Dr. Diaa Eldin Daghma

16:03
F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Oral Poster
Bone Regeneration Biomaterials in Dentistry

Ali Solimani Dr. Parisa Zarnegarnia

16:06
F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Oral Poster
Contribution to Understand the Biomineralization of Bones

Benjamin Kruppke Prof. Dr. Hartmut Worch Benjamin Kruppke Dr. Thomas Gemming

16:09
F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Oral Poster
Validation of a novel hydroxyl apatite-based implant for orthopaedic indications - The example of Anterior cruciate ligament (ACL) interference screw

Dr. Thaqif El Khassawna Prof. Dr. Kurosch Rezwan Dr. Markus Engelhardt Prof. Dr. Christian Heiss

16:45
F09: Materials for Bone Tissue Regeneration
F09.2: Session 2: Compatibility, Release and Interactivity of Materials for Bone Tissue Regeneration
Session starts at 16:45 Lecture
Cellular compatibility of risedronate loaded polyelectrolyte-complex nanoparticles in vitro

Maximilian Siebert David Vehlow Romy Schmidt Dr. Annett Gebert Olga Dakischew Prof. Dr. Christian Heiß Dr. Müller Martin Prof. Dr. Katrin Susanne Lips

17:00
F09: Materials for Bone Tissue Regeneration
F09.2: Session 2: Compatibility, Release and Interactivity of Materials for Bone Tissue Regeneration
Session starts at 16:45 Lecture
Mechanical characterization of a new TiNb alloy generation for implant applications

André Reck Stefan Pilz Prof. Dr. Mariana Calin Prof. Dr. Jürgen Eckert Dr. Annett Gebert Prof. Dr. Martina Zimmermann

17:15
F09: Materials for Bone Tissue Regeneration
F09.2: Session 2: Compatibility, Release and Interactivity of Materials for Bone Tissue Regeneration
Session starts at 16:45 Lecture
Engineering the spatial presentation of bone morphogenetic proteins and adhesive motifs at the cell-material interface.

Dr. Elisabetta Ada Cavalcanti-Adam Volker Martin Dr. Elisabeth Schwab Francesca Posa Dr. Giorgio Mori

17:30
F09: Materials for Bone Tissue Regeneration
F09.2: Session 2: Compatibility, Release and Interactivity of Materials for Bone Tissue Regeneration
Session starts at 16:45 Lecture
Sustained release of bone morphogenetic protein 2 from its nanoparticular adhesive ternary complexes with cationic and anionic polysaccharides

Dr. Martin Müller David Vehlow Richard Petzold Mieke Luisa Möller Birgit Urban Dr. Ada Elisabetta Cavalcanti-Adam Prof. Volker Alt

17:45
F09: Materials for Bone Tissue Regeneration
F09.2: Session 2: Compatibility, Release and Interactivity of Materials for Bone Tissue Regeneration
Session starts at 16:45 Lecture
Co-relating osteocyte network to Implant Degradation and Bone - Implant Anchorage

Dr. Seemun Ray Dr. Thaqif El Khassawna Dr. Ulrich Thormann Dr. Ursula Sommer Prof. Dr. Michael Gelinsky Prof. Dr. Thomas Hanke Dr. Anja Henss Dr. Marcus Rohnke Prof. Dr. Christian Heiss Prof. Dr. Volker Alt

Thursday (29.09.2016)

09:15
F03: Biomaterials Applications
F03.1: Session 1
Session starts at 09:15 Lecture
Characterization of pelvic floor ligaments for the development of mesh materials to treat pelvic organ prolapse

Adwoa Baah-Dwomoh Dr. Raffaella De Vita

F04: Bio-inspired Materials
F04.1: Session 1
Session starts at 09:15 Lecture
Acid-base properties of PDMPO and its use in the study of (bio)silicification

Prof. Carole C. Perry Mithun Parambath Dr. Quentin Hanley Dr. Tristan Giesa Dr. Francisco Martin-Martinez Prof. Markus Buehler

09:30
F03: Biomaterials Applications
F03.1: Session 1
Session starts at 09:15 Lecture
Fatigue and Fracture of Wire-Based Systems used in Biomedical Applications

Janet Gbur John Lewandowski

F04: Bio-inspired Materials
F04.1: Session 1
Session starts at 09:15 Lecture
Molecular Mechanism of Crystal Growth Inhibition at the Calcium Oxalate/Water Interfaces

Dr. Marialore Sulpizi Leila Salimi Parvaneh Prof. Dr. Davide Donadio

09:45
F03: Biomaterials Applications
F03.1: Session 1
Session starts at 09:15 Lecture
Mechanical properties of Ti-Nb-Zr-Ta-O biomedical alloy

Ph.D. Josef Strásky Kristina Vaclavova Dalibor Preisler Dr. Petr Harcuba Prof. Milos Janecek

F04: Bio-inspired Materials
F04.1: Session 1
Session starts at 09:15 Lecture
Large-scale nacre-inspired composites by centrifugation-assisted sedimentation

Sebastian Behr Prof. Dr. Gerold A. Schneider

10:00
F03: Biomaterials Applications
F03.1: Session 1
Session starts at 09:15 Lecture
Phase transformations and electrochemical stability of TiO2 nanotubes films grows in beta metastable titanium alloys

Prof. Dr. Alessandra Cremasco Prof. Dr. Rodrigo Jose Contieri Prof. Dr. Ricardo Floriano Alberto Zanesco Fatichi Raphael Yudi Matsukuma

F04: Bio-inspired Materials
F04.1: Session 1
Session starts at 09:15 Lecture
The Underlying Mechanism of Variation of Bamboo Microfibril Mechanical Properties with Water Molecules

Dr. Sina Youssefian Prof. Nima Rahbar

10:15
F03: Biomaterials Applications
F03.1: Session 1
Session starts at 09:15 Lecture
Electrophoretic deposition of multifunctional chitosan- bioactive glass composite coatings with drug delivery capability

Prof. Dr. Aldo R. Boccaccini

F04: Bio-inspired Materials
F04.1: Session 1
Session starts at 09:15 Lecture
Smart shape changing wood elements for climate adaptive building shells

Ph.D. Chiara Vailati Dr. Markus Rüggeberg Prof. Dr. Ingo Burgert

10:30
F03: Biomaterials Applications
F03.1: Session 1
Session starts at 09:15 Lecture
Exploiting bisphosphonate-bioactive glass interaction for development of bioactive and self-healing composite hydrogels

Mani Diba Dr. Jie An Prof. Dr. Stephan Schmidt Prof. Dr. Aldo Boccaccini Prof. Dr. Sander Leeuwenburgh

F04: Bio-inspired Materials
F04.1: Session 1
Session starts at 09:15 Lecture
Bio-Inspired 3D Printed Hygroscopic Responsive Systems

David Correa

11:15
F03: Biomaterials Applications
F03.2: Session 2
Session starts at 11:15 Lecture
Mechanical spectroscopy of retina explants at the protein level employing nanostructured scaffolds

Dr. Mareike Zink Prof. Dr. Stefan G. Mayr

F04: Bio-inspired Materials
F04.2: Session 2
Session starts at 11:15 Lecture
An ontology-based exploration of biological structures and functions by use of historical biological data

Dr. Friederike Saxe Dr. Michael Dürfeld Linda Winkler Markus Mandalka Philipp Schröter Anne Lange Anika Schultz Christian Köhler Dr. Clemens Schmitt Prof. Dr. Wolfgang Schäffner Prof. Dr. Peter Fratzl

F05: SPP 1569 Generation of Multifunctional Inorganic Materials by Molecular Bionics
F05.1: Session 1
Session starts at 11:15 Keynote Lecture
Sustainable fabrication of self-organized meso/nanostructures

Prof. Dr. Mady Elbahri

11:30
F03: Biomaterials Applications
F03.2: Session 2
Session starts at 11:15 Lecture
Nanomechanical and viscoelastic measurements in biological Atomic Force Microscopy (AFM)

Dr. Florian Johann Dr. Sophia Hohlbauch Dr. Nicholas Geisse

F04: Bio-inspired Materials
F04.2: Session 2
Session starts at 11:15 Lecture
Bioinspired Anti-Icing Surface Materials

Prof. Dr. Jianjun Wang

11:45
F03: Biomaterials Applications
F03.2: Session 2
Session starts at 11:15 Lecture
Osteogenic differentiation of stem cells on bone surface microenvironment mimicked biodegradable scaffolds

Prof. Dr. Bora Garipcan Birgun Ozcolak Dr. Cagri Kaan Akkan Dilara Perver Prof. Dr. Klaus D. Jandt

F04: Bio-inspired Materials
F04.2: Session 2
Session starts at 11:15 Lecture
Tailoring Toughness and Mechanical Reliability by Controlled Laser-Drilled Defects

Sebastian Behr Andre Koellner Prof. Dr. Gerold A. Schneider

F05: SPP 1569 Generation of Multifunctional Inorganic Materials by Molecular Bionics
F05.1: Session 1
Session starts at 11:15 Lecture
Tobacco mosaic virus architectures with dual function: as mineralization templates and probes for semiconducting field-effect transistors

Dr. Sabine Eiben Angela Schneider Shawn Sanctis Dr. Petia Atanasova Prof. Dr. Joerg J. Schneider Prof. Dr. Joachim Bill

12:00
F03: Biomaterials Applications
F03.2: Session 2
Session starts at 11:15 Lecture
Skin wound-healing photo-induced type I atelocollagen networks

Dr. He Liang Dr. He Liang Roisin Holmes Prof. David Wood Prof. Stephen Russell Giuseppe Tronci

F05: SPP 1569 Generation of Multifunctional Inorganic Materials by Molecular Bionics
F05.1: Session 1
Session starts at 11:15 Lecture
How does diatom biosilica enhance catalytic reactions?

Prof. Dr. Nils Kröger Dr. Gousia Begum Cathleen Fischer Prof. Dr. Eike Brunner

12:15
F03: Biomaterials Applications
F03.2: Session 2
Session starts at 11:15 Lecture
Nanocomposite bioactive scaffolds with multiple therapeutic ion delivery capabilities: progress and challenges

Prof. Dr. Aldo R. Boccaccini

F05: SPP 1569 Generation of Multifunctional Inorganic Materials by Molecular Bionics
F05.1: Session 1
Session starts at 11:15 Lecture
Design of biomimetic composites and enzymatically active materials directed by computational modelling

Prof. Dr. Lucio Colombi Ciacchi

12:30
F03: Biomaterials Applications
F03.2: Session 2
Session starts at 11:15 Lecture
Porous Sol-gel Silica/Gelatin hybrid micro and nano-fibres fabricated via cryogenic solution blow spinning

Ryan Greenhalgh William Ambler Dr. Jonny. J Blaker

F05: SPP 1569 Generation of Multifunctional Inorganic Materials by Molecular Bionics
F05.1: Session 1
Session starts at 11:15 Lecture
Multifunctional layered magnetic materials

Prof. Dr. Helmut Cölfen Prof. Dr. Dirk Zahn Dr. Vitalij Pipich Dr. Damien Faivre Christian Debus Baohu Wu

15:00
F03: Biomaterials Applications
F03.3: Session 3
Session starts at 15:00 Lecture
Magnetic nanoparticles with radioactive labels for bimodal (MRI/PET) cellular imaging

Markus Schütz Isabel Gessner Stefan Schonauer Prof. Dr. Bernd Neumaier Prof. Dr. Sanjay Mathur

F05: SPP 1569 Generation of Multifunctional Inorganic Materials by Molecular Bionics
F05.2: Session 2
Session starts at 15:00 Keynote Lecture
Using peptide-mineral interactions to moderate nanoscale mineral morphology/ composition

Prof. Carole C. Perry

15:15
F03: Biomaterials Applications
F03.3: Session 3
Session starts at 15:00 Lecture
Upconverting NaGdF4:Er3+,Yb3+ nanoparticles for energy transfer based drug release modeling

Isabel Gessner Markus Schütz Dr. Eva Hemmer Prof. Marc A. Gauthier Prof. Fiorenzo Vetrone Prof. Sanjay Mathur

15:30
F03: Biomaterials Applications
F03.3: Session 3
Session starts at 15:00 Lecture
Surface-integrated Microsensors for 3D-Cell Traction Force Measurements

Dr.-Ing. Hendrikje R. Neumann Prof. Dr. Eckhard Quandt Prof. Dr. Christine Selhuber-Unkel

F05: SPP 1569 Generation of Multifunctional Inorganic Materials by Molecular Bionics
F05.2: Session 2
Session starts at 15:00 Lecture
Stepwise assembly of bio-inorganic nanopore arrays: hybrid membranes with firmly implanted plant virus-based channels

Prof. Dr. Christina Wege Dr. Klara Altintoprak Dr. Axel Seidenstuecker Dr. Farid Farajollahi Dr. Alexander Welle Dr. Peter Krolla-Sidenstein Dr. Hartmut Gliemann Dr. Alfred Plettl Prof. Dr. Othmar Marti

15:45
F03: Biomaterials Applications
F03.3: Session 3
Session starts at 15:00 Lecture
Synthesis and characterization of bioactive glass nanoparticles incorporating biologically active ions

Prof. Dr. Aldo R. Boccaccini

F05: SPP 1569 Generation of Multifunctional Inorganic Materials by Molecular Bionics
F05.2: Session 2
Session starts at 15:00 Lecture
Silk based Hybrid Materials

Stefanie Krüger Prof. Dr. Verónica de Zea Bermudez Hannah Klein Dr. Michael Schwarze Tamara Aigner Prof. Dr. Thomas Scheibel Prof. Dr. Andreas Taubert

16:00
F03: Biomaterials Applications
F03.3: Session 3
Session starts at 15:00 Lecture
Graphene electrodes for Long term low impedance reliable electrocardiogram recordings

Samuel Escobar Dr. Frank Mendoza Tej Limbu Prof. Dr. Brad Weiner Prof. Dr. Gerardo Morell

F05: SPP 1569 Generation of Multifunctional Inorganic Materials by Molecular Bionics
F05.2: Session 2
Session starts at 15:00 Lecture
Functionalization of bacterial magnetic nanoparticles by genetic engineering and surface display of functional groups and reporter enzymes

Dr. Frank Mickoleit Prof. Dr. Dirk Schüler

16:15
F05: SPP 1569 Generation of Multifunctional Inorganic Materials by Molecular Bionics
F05.2: Session 2
Session starts at 15:00 Lecture
High-resolution low-voltage spherical and chromatic aberration-correction TEM for imaging the process of mineralization at the TMV/inorganic interface - first results

Prof. Dr. Ute Kaiser

reset

Search

(all)
Date
Search

© Deutsche Gesellschaft für Materialkunde e.V. Impressum   AGB