Tuesday (27.09.2016)

10:45
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.1: Electrode Materials 1
Session starts at 10:45 Lecture
On the understanding of irreversible and reversible lithium storage within SiOC and SiCN ceramics

Dr. Magdalena Graczyk-Zajac Prof. Dr. Ralf Riedel

A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Keynote Lecture
Sol-gel derived silicon carbide for energy conversion

Dr. Bettina Friedel Olivia Kettner Prof. Dr. Robert Schennach Prof. Dr. Thomas Griesser

A04: Thermo-Chemical Materials for long term compact heat storage
A04.1: Session 1
Session starts at 10:45 Lecture
Inorganic crystal hydrates for heat storage: potential and limitations

Dr. Henk Huinink Dr. Pim Donkers Leyla Sogutoglu

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.1: Theoretical and experimental characterization of catalytic interfaces
Session starts at 10:45 Keynote Lecture
The importance of the electrochemical environment in the modeling of electrocatalytic processes

Prof. Dr. Axel Groß

11:00
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.1: Electrode Materials 1
Session starts at 10:45 Lecture
Structure, thermodynamics and electrochemistry of SiOC electrodes from first-principles

Dr. Jochen Rohrer Prof. Dr. Karsten Albe

A04: Thermo-Chemical Materials for long term compact heat storage
A04.1: Session 1
Session starts at 10:45 Lecture
SrCl2—H2O system in view of thermochemical heat storage

Prof. Michael Steiger Dr. Konrad Posern Prof. Dr. Andrea Osburg Dr. Kirsten Linnow

11:15
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.1: Electrode Materials 1
Session starts at 10:45 Lecture
Synthesis and Stabilization of Amorphous/Crystalline 3D Nano Silicon

Dragoljub Vrankovic Kerstin Wissel Prof. Dr. Ralf Riedel Dr. Magdalena Graczyk-Zajac

A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Highlight Lecture
Oxidation of CO utilising CuFe2O4 based carbon nanotube catalysts for use in fuel cells

Dr. Darko Hanzel Dr. Venkata D. B. C. Dasireddy Prof. Krish Bharuth-Ram Prof. Blaž Likozar

A04: Thermo-Chemical Materials for long term compact heat storage
A04.1: Session 1
Session starts at 10:45 Lecture
Stability of salt hydrates during cyclic loading/unloading

Dr. Pim Donkers Prof. Dr. Olaf Adan Prof. Dr. David Smeulders Dr. Leo Pel

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.1: Theoretical and experimental characterization of catalytic interfaces
Session starts at 10:45 Highlight Lecture
Towards understanding the mechanism of water splitting on TiO2

Ellen Backus Simon Schmitt Saman Hosseinpour

11:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.1: Electrode Materials 1
Session starts at 10:45 Lecture
Phase stabilities in the system Li-Si-Sn-C – an experimental study

Martin Drüe Artem Kozlov Martin Seyring Xiaoyan Song Rainer Schmid-Fetzer Markus Rettenmayr

A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Lecture
Influence of GITC (guanidinium thiocyanate) on the performance of MAPbI3 perovskite solar cells by two step solution processing

Senol Öz Eunhwan Jung Senol Oez Ripon Bhattacharjee Prof. Dr. Hongxia Wang Prof. Dr. Sanjay Mathur

A04: Thermo-Chemical Materials for long term compact heat storage
A04.1: Session 1
Session starts at 10:45 Lecture
Microencapsulation of calcium chloride for enhanced thermochemical energy storage

Dr. Joris Salari

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.1: Theoretical and experimental characterization of catalytic interfaces
Session starts at 10:45 Lecture
Water at solid/water interfaces: structure and spectroscopy

Dr. Marialore Sulpizi

11:45
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.1: Electrode Materials 1
Session starts at 10:45 Lecture
Coulometric titration in the system Cu-Li-Sb: Thermodynamic, structural and kinetic aspects

Alexander Beutl

A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Lecture
Strategies for the efficiency enhancement of solar carbon dioxide photoreduction: towards the chemical storage of solar energy.

Ph.D. Sebastian Murcia Dr. Cristian Fabrega Dr. Maria Dolores Hernandez-Alonso Dr. German Penelas Prof. Dr. Joan Ramon Morante Dr. Teresa Andreu

A04: Thermo-Chemical Materials for long term compact heat storage
A04.1: Session 1
Session starts at 10:45 Lecture
Encapsulation of CaO/Ca(OH)2 for Thermochemical Energy Storage

Sandra Afflerbach Burkhard Görtz Prof. Dr. Reinhard Trettin

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.1: Theoretical and experimental characterization of catalytic interfaces
Session starts at 10:45 Lecture
The Structure and Proton Dynamics of Water at Metal Surfaces

Prof. Dr. Rengin Pekoz Prof. Dr. Davide Donadio

12:00
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.1: Electrode Materials 1
Session starts at 10:45 Lecture
Phase Field Modeling of Phase Segregation and Electrochemically induced Fracture in Li-ion Battery Electrode Materials

Dr. Bai-Xiang Xu Ying Zhao Dr. Peter Stein

A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Oral Poster
Up-conversion in perovskite strontium stannate nanocrystals for application in dye-sensitized solar cell

Dr. Ashok Kumar Vikas Sahrawat

A04: Thermo-Chemical Materials for long term compact heat storage
A04.1: Session 1
Session starts at 10:45 Lecture
Thermochemical heat storage by magnesium and calcium hydroxides doped by inorganic salts

Aleksandr Shkatulov Prof. Yuri Aristov

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.1: Theoretical and experimental characterization of catalytic interfaces
Session starts at 10:45 Lecture
State-to-state energy transfer in interaction of nitrogen oxide molecules with films of Vanadium Dioxide

Dr. Igor Rahinov Anita Pilipody Artur Meling Bastian Krueger Dr. Tim Schaefer Dr. Vladimir Tsionsky Prof. Sergey Cheskis Prof. Dr. Alec Wodtke

12:03
A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Oral Poster
Zero-dimensional(CH3NH3)3Bi2I9 perovskiteforoptoelectronic applications

Senol Öz Jan-Christoph Hebig Eunhwan Jung Dr. Trilok Singh Asish Lepcha Dr. Selina Olthof Yajun Gao Raphael German Prof. Dr. Paul H.M. van Loosdrecht Prof. Dr. Thomas Kirchartz Prof. Dr. Klaus Meerholz Prof. Dr. Sanjay Mathur

12:06
A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Oral Poster
Charge transfer characterization on Atomic Layer Deposited TiO2 protective and conductive layers for Photoelectrochemical Solar Fuels

Dr. Nina M. Carretero Dr. Teresa Andreu Prof. Juan Ramon Morante Ph.D. Carles Ros

12:09
A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Oral Poster
Size and Shape Effects on Deformation/Fracture Behavior of Vanadium Alloy Membrane for Hydrogen Separation and Purification

Prof. Dr. Yoshihisa Matsumoto Keita Himeno

14:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.2: Electrode Materials 2
Session starts at 14:30 Lecture
Determination of the Enthalpy of Mixing in the LiFePO4-FePO4-System at 25 °C via Isothermal Titration Calorimetry

Christian Thomas Dr. Regina Hüttl Dr. Jürgen Seidel Prof. Dr. Florian Mertens

A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Keynote Lecture
Industry-relevant production technology of thermoelectric materials for waste heat recovery

Dr. Christian Stiewe Reinhard Sottong Prof. Dr. Eckhard Müller

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.2: Electrochemical properties at interfaces and catalysts: from multiscale modelling to applications
Session starts at 14:30 Keynote Lecture
Ab initio study of the Solvent-Electrode Interface in Li/Ion battery Materials

Prof. Dr. Jean-Sébastien Filhol Dr. Nicolas Lespes

14:45
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.2: Electrode Materials 2
Session starts at 14:30 Lecture
Phase field modeling of Li-insertion kinetics in single LiFePO4 nano-particles for rechargeable Li-ion battery application

Dr. Michael Fleck Philipp Amendt Holger Federmann Prof. Dr. Heike Emmerich

15:00
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.2: Electrode Materials 2
Session starts at 14:30 Lecture
Experimental investigations and modeling in the Li-Co-O lithium-ion battery system

Nicolas Mayer Dr. Petronela Gotcu-Freis Dr. Thomas Ludwig Reichmann Dr. Maren Lepple Dr. Damian Marlon Cupid Prof. Dr. Hans Jürgen Seifert

A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Lecture
Interface characterization by computational methods of phase separated NiSn-based thermoelectric half-Heuslers.

Dr. Joaquin Miranda Dr. Thomas Gruhn Prof. Dr. Heike Emmerich

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.2: Electrochemical properties at interfaces and catalysts: from multiscale modelling to applications
Session starts at 14:30 Lecture
First-Principles Prediction of the Electrochemical Stability of Bimetallic Catalysts for Use as Fuel Cell Electrodes

Prof. Ismaila Dabo

15:15
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.2: Electrode Materials 2
Session starts at 14:30 Lecture
Thermochemistry of selected compositions in the LiNiO2-LiCoO2-LiMnO2 system as promising lithium ion battery cathode materials

Maryam Masoumi Dr. Damian Cupid Dr. Thomas Reichmann Prof. Hans Jürgen Seifert

A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Lecture
Oxide thermoelectrics: from materials to multilayer thermoelectric generators

Prof. Dr. Jörg Töpfer Timmy Reimann Thomas Schulz Arne Bochmann Prof. Dr. Steffen Teichert Andy Vogel Beate Capraro

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.2: Electrochemical properties at interfaces and catalysts: from multiscale modelling to applications
Session starts at 14:30 Lecture
Solar Water Splitting by Doping-Treated BiVO4

Dr.-Ing. Won Jun Jo Prof. Karen Gleason Prof. Jae Sung Lee

15:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.2: Electrode Materials 2
Session starts at 14:30 Lecture
On the effect of microstructure and current load sequence on the electrochemical behaviour of NCM-based cathodes for Lithium-ion batteries

Matthias Kleinbach Prof. Dr. Volker Knoblauch Denny Schmidt

A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Lecture
Study of electrocatalysts deposition onto TiO2 protective coatings in photoelectrochemical systems

Dr. Nina M. Carretero Dr. Teresa Andreu

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.2: Electrochemical properties at interfaces and catalysts: from multiscale modelling to applications
Session starts at 14:30 Lecture
Power to liquid from simulation

Dr. Michael Walter Thomas Reichenbach Dr. Krishnakanta Mondal Dr. Daniel Himmel Dr. Albert Bruix Prof. Bjork Hammer Prof. Ingo Krossing Prof. Michael Moseler

15:45
A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Oral Poster
Pulsed Laser Deposition of High Performance Single and Multilayered Photoanodes for Water Splitting

Ph.D. Sebastian Murcia Dr. Teresa Andreu Dr. Cristian Fàbrega Dr. María Dolores Hernández-Alonso Dr. Germán Penelas Prof. Dr. Juan Ramón Morante

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.2: Electrochemical properties at interfaces and catalysts: from multiscale modelling to applications
Session starts at 14:30 Lecture
Coherent X-ray Diffraction from Nanodots of Catalytically Active Materials

Dr. Thomas F. Keller Dr. Roman Shayduk Dr. Vedran Vonk Dr. Arti Dangwal Pandey Claudia Neisser Dr. Alexey Zozulya Dr. Michael Sprung Dr. Irene Fernandez-Cuesta Prof. Andreas Stierle

15:48
A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Oral Poster
Fabrication of BaTaO2N Crystal Layers on Ta Substrate by a Flux Coating Method

Dipl.-Ing. Yuki Hara Dr. Mirabbos Hojamberdiev Dr. Hajime Wagata Prof. Katsuya Teshima

15:51
A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Oral Poster
Combined atom probe tomography and electron backscatter diffraction experiments of Ag16.7Sb30Te53.3 bulk thermoelectric material

Ph.D. Lamya Abdellaoui Prof. Dr. Christina Scheu Dr. Oana Cojocaru-Mirédin Prof. Dr. Dierk Raabe Prof. Yaron Amouyal

16:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.3: Advanced Analysis
Session starts at 16:30 Lecture
Operando SQUID magnetometry as tool for studying charging and discharging processes in Lithium ion battery cathodes

Prof. Dr. Roland Würschum Gregor Klinser Dr. Stefan Topolovec Dr. Harald Kren Dr. Stefan Koller Prof. Dr. Heinz Krenn

A03: Materials for Energy Engineering
A03.3: Batteries and Nuclear
Session starts at 16:30 Highlight Lecture
Design and additive manufacture of complex geometries for heat transfer management in energy engineering

Prof. Dr. Andres Diaz Lantada Adrian De Blas Romero Prof. Dr. Enrique Chacon Tanarro

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Highlight Lecture
Non-platinum electrocatalysts for anion exchange membrane fuel cells (AEM-FCs)

Prof. Dr. Dario Dekel

16:45
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.3: Advanced Analysis
Session starts at 16:30 Lecture
XPS- analysis of composite cathodes in 18650 Li-ion batteries as a function of spatial origin and cycling protocol

Dipl.-Ing. Natalia Schulz Dr. Lucangelo Dimesso Prof. Dr. Wolfram Jaegermann Dr. René Hausbrand

A03: Materials for Energy Engineering
A03.3: Batteries and Nuclear
Session starts at 16:30 Lecture
Using FeCrAl Cladding for High Performance Fuel in Light Power Reactors

Raul Rebak

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Lecture
Defects Triggered Activity of TiO2 for Hydrogen Evolution

Prof. Dr. Peter Schaaf Dr. Yong Yan Dr. Dong Wang Prof. Dr. Ge Chen Prof. Dr. R. S. Sun H. M. Wang Dr. A. Konkin

17:00
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.3: Advanced Analysis
Session starts at 16:30 Lecture
In-situ Thin-Film Calorimetry on Thin-Film All-Solid-State-Electrochemical-Cells

Hendrik Wulfmeier Alexander Omelcenko Daniel Albrecht Susann Nowak Leila Raafat Prof. Dr. Guido Schmitz Prof. Dr. Holger Fritze

A03: Materials for Energy Engineering
A03.3: Batteries and Nuclear
Session starts at 16:30 Lecture
Self-passivating, tungsten-based smart alloys for extreme environments

Felix Klein Tobias Wegener Dr. Andrey Litnovsky Dr. Marcin Rasinski Dr. Hongchu Du Prof. Dr. Joachim Mayer Prof. Dr. Christian Linsmeier

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Lecture
Successful application of a commercial cationic surfactant mixture (benzalkonium chloride) as porosity stabilizer in porous carbons fabrication

Prof. Dr. Cesar Barbero Luciano Tamborini Dr. Miriam Casco Paula Militello Dr. Joaquín SILVESTRE-ALBERO Dr. Diego Acevedo

17:15
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.3: Advanced Analysis
Session starts at 16:30 Lecture
Improved Thin-Film Calorimeter for High-Temperature Investigations of Thin Films

Alexander Omelcenko Hendrik Wulfmeier Sebastian Schröder Prof. Dr. Holger Fritze

A03: Materials for Energy Engineering
A03.3: Batteries and Nuclear
Session starts at 16:30 Lecture
Phase Transformations upon Doping in Tungsten Trioxide

Wennie Wang Prof. Dr. Anderson Janotti Prof. Dr. Chris G. Van de Walle

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Lecture
PECVD of CoOxOH2 and CoMOxOH2 (M=Ni, Fe) as Catalysts for the Oxygen Evolution Reaction

Natascha Weidler Jona Schuch Dr. Bernhard Kaiser Prof. Dr. Wolfram Jaegermann

17:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.3: Advanced Analysis
Session starts at 16:30 Lecture
Determination of heat capacities of cathode materials and calorimetry on coin cells with a DSC-like Battery Calorimeter for Lithium-Ion Batteries

Dr. David Henriques Hans Giel Prof. Dr. Torsten Markus

A03: Materials for Energy Engineering
A03.3: Batteries and Nuclear
Session starts at 16:30 Oral Poster
Optimization of Flexible Silver-Zinc Wire Battery for Integration in Wearable Electronics.

Cheryl Chang Alla Zamarayeva Dr. Abhinav Gaikwad Dr. Igal Deckman Michael Wang Brian Khau Prof. Daniel Steingart Prof. Ana Claudia Arias

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Lecture
Uranium oxide materials for solar hydrogen production

Jennifer Leduc Prof. Dr. Sanjay Mathur Prof. Dr. Yakup Gönüllü Dr. Thomas Fischer

17:33
A03: Materials for Energy Engineering
A03.3: Batteries and Nuclear
Session starts at 16:30 Oral Poster
Reimagined battery geometries for increased mechanical robustness in flexible Ag-Zn battery systems

Michael Liu Alla Zamarayeva Michael Wang Igal Deckman Greg Davies Claire Lochner Daniel Steingart Ana Arias

17:45
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.3: Advanced Analysis
Session starts at 16:30 Lecture
Heat capacity measurement of LiSi in a temperature range 2 - 730 K

Franziska Biedermann Dr. Raphaël Janot Dr. Regina Hüttl Dr. Jürgen Seidel Prof. Dr. Roman Gumeniuk Prof. Dr. Florian Mertens

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Oral Poster
The double layer of Pt-water interfaces from first principles molecular dynamics

Dr.-Ing. Ashwinee Kumar Prof. Stefano Sanvito Dr. Clotilde S. Cucinotta

17:48
A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Oral Poster
Hydrogen sorption kinetics of titanium hydride thin films

Lukas Michalek Efi Hadjixenophontos Prof. Dr. Guido Schmitz

Wednesday (28.09.2016)

09:15
A01: High-Temperature Functional Materials
A01.1: Sensors and Measurement Principles
Session starts at 09:15 Keynote Lecture
Development of Long Wavelength Infrared Radiation Thermometry for Measurements in Gas Turbines

Prof. Dr. Jürgen Hartmann Dr. Jochen Manara M. Zipf T. Stark M. Arduini A. Tutschke A. Hallam J. Hanspal M. Langley D. Hodge

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.4: New Materials Concepts
Session starts at 09:15 Lecture
First-Principles Calculations on Structure and Properties of Amorphous LiPON

Dr. Sabrina Sicolo Prof. Dr. Karsten Albe

A10: Ferroelectric and Multiferroic Materials
A10.1: Ferroelectric and Multiferroic Materials I
Session starts at 09:15 Lecture
Effect of criticality on the piezoelectric and electrocaloric properties of relaxor ferroelectrics

Florian Weyland Dr. Matias Acosta Dr. Nikola Novak

09:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.4: New Materials Concepts
Session starts at 09:15 Lecture
Towards an understanding of the interface formation between LiPON and LAGTP/LATP electrolytes for all solid state batteries

Conrad Guhl Dr. René Hausbrand Prof. Dr. Wolfram Jaegermann

A10: Ferroelectric and Multiferroic Materials
A10.1: Ferroelectric and Multiferroic Materials I
Session starts at 09:15 Lecture
Enhancement of electrocaloric cooling by electric field reversal: simulation and experiment

Yangbin Ma Dr. Nikola Novak Dr. Jurij Koruza Prof. Tongqing Yang Prof. Dr. Karsten Albe Prof. Bai-Xiang Xu

09:45
A01: High-Temperature Functional Materials
A01.1: Sensors and Measurement Principles
Session starts at 09:15 Lecture
Temperature Stable Indium Oxide Photonic Crystals as new Transducer Material for Optical and Resistive Gas Sensing

Dr. Thorsten Wagner Sabrina Amrehn Dr. Xia Wu

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.4: New Materials Concepts
Session starts at 09:15 Lecture
Influence of structural and crystallographical factors on the Li-ion conductivity of garnet type cubic Li7La3Zr2O12 electrolyte units

Prof. Mamoru Senna Dr. P. Jeevan Kumar Dr. Andre Düvel Dr. C. Vinod Chandran Dr. Katharina Bösebeck Prof. Dr. Paul Heitjans Prof. Naonori Sakamoto Prof. Naoki Wakiya Prof. Hisao Suzuki

A10: Ferroelectric and Multiferroic Materials
A10.1: Ferroelectric and Multiferroic Materials I
Session starts at 09:15 Keynote Lecture
Transfer of lead-free piezoelectric materials into application: status and perspective

Prof. Dr. Jürgen Rödel Dr. Jurij Koruza

10:00
A01: High-Temperature Functional Materials
A01.1: Sensors and Measurement Principles
Session starts at 09:15 Lecture
Defect chemistry, electrical and electromechanical properties of CTGS single crystals at high-temperatures

Dr. Yuriy Suhak Dr. Michal Schulz Dr. Andrei Sotnikov Dr. Hagen Schmidt Prof. Dr. Holger Fritze

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.4: New Materials Concepts
Session starts at 09:15 Lecture
Thin-film all solid-state lithium-ion batteries

Susann Nowak Dr. Frank Berkemeier Prof. Dr. Guido Schmitz

10:15
A01: High-Temperature Functional Materials
A01.1: Sensors and Measurement Principles
Session starts at 09:15 Lecture
Three-Dimensional Woven Lattice Material with High Damping at Elevated Temperatures

Dr. Stefan Szyniszewski Ladan Salari Sharif Manuel Pelacci Dr. Seunghyan Ha Sharp Keith Prof. Lorenzo Valdevit Prof. James Guest Prof. Kevin Hemker Tim Weihs

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.4: New Materials Concepts
Session starts at 09:15 Lecture
High-Power Li-Ion battery based on vertically aligned carbon nanotubes

Fabian Pawlitzek Dr. Benjamin Schumm Dr. Holger Althues Prof. Dr. Stefan Kaskel

A10: Ferroelectric and Multiferroic Materials
A10.1: Ferroelectric and Multiferroic Materials I
Session starts at 09:15 Lecture
Visualization of polar nanoregions in bismuth-alkali-based relaxor ferroelectrics revealed by high-resolution PFM and quantification of the relaxation behavior via high-speed PFM

Dr. Christian Dietz

10:30
A01: High-Temperature Functional Materials
A01.1: Sensors and Measurement Principles
Session starts at 09:15 Lecture
Homo-Epitaxial Deposition of Piezoelectric Langasite Thin Films

Dr. René Feder Prof. Dr. Holger Fritze

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.4: New Materials Concepts
Session starts at 09:15 Lecture
Nitrogen Doped Hierarchically Porous Carbon/Sulfur Cathode Electrode for Li/S battery: Mechanistic Study by Ex-situ XPS and In-situ Raman Spectroscopy

Dr. Vinayan Bhaghavathi Parambath Prof. Dr. Maximilian Fichtner

A10: Ferroelectric and Multiferroic Materials
A10.1: Ferroelectric and Multiferroic Materials I
Session starts at 09:15 Lecture
Phase transitions in the relaxor-like sodium bismuth titanate studied by density functional theory calculations

Kai-Christian Meyer Leonie Koch Prof. Dr. Karsten Albe

11:15
A01: High-Temperature Functional Materials
A01.2: Function and Structure
Session starts at 11:15 Lecture
From very high to negative thermal expansion in alkaline earth zinc silicates

Dr.-Ing. Christian Thieme Martin Schlesier Tina Waurischk Prof. Christian Rüssel

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.5: Materials for Na-ion based energy storage
Session starts at 11:15 Lecture
High conductivity and dielectric constant Na based glass electrolyte

Prof. Maria Helena Braga Andrew J. Murchison Dr. Jorge A. Ferreira Prof. Dr. John B. Goodenough

A10: Ferroelectric and Multiferroic Materials
A10.2: Ferroelectric and Multiferroic Materials II
Session starts at 11:15 Lecture
Fully integrable magnetic field sensors based on delta-E effect

Benjamin Spetzler Christine Kirchhof Jens Reermann Prof. Dr. Bernhard Wagner Prof. Dr. Gerhard Schmidt Prof. Dr. Eckhard Quandt Dr. Dirk Meyners Prof. Dr. Franz Faupel Sebastian Zabel

11:30
A01: High-Temperature Functional Materials
A01.2: Function and Structure
Session starts at 11:15 Lecture
The Mechanical Properties of a PM1000 and PM2000Oxide-Dispersion-Strengthened Alloy tested by High Temperature Nanoindentation Testing

Dr. Ude Dirk Hangen Prof. Dr. Asta Richter Prof. Dr. Chung-Liang Cheng

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.5: Materials for Na-ion based energy storage
Session starts at 11:15 Lecture
Synthesis and Electrochemical Properties of Na3V3P2O13 as Cathode Material for Sodium-Ion Batteries

Dr. Anji Reddy Munnangi Dr. Oliver Clemens Prof. Dr. Maximilian Fichtner

A10: Ferroelectric and Multiferroic Materials
A10.2: Ferroelectric and Multiferroic Materials II
Session starts at 11:15 Lecture
Multiferroic clusters: a new perspective for relaxor-type room-temperature multiferroics

Dr. Leonard Henrichs Dr. Oscar Cespedes Dr. James Bennett Joachim Landers Soma Salamon Dr. Christian Heuser Dr. Thomas Hansen Tim Helbig Prof. Dr. Oliver Gutfleisch Prof. Dr. Doru Lupascu Prof. Dr. Heiko Wende Prof. Dr. Wolfgang Kleemann Prof. Dr. Andrew Bell

11:45
A01: High-Temperature Functional Materials
A01.2: Function and Structure
Session starts at 11:15 Lecture
PZN-PT Perovskite Nanoparticles Thin Layer Deposition on Nanostructured p-Type Silicon Substrate for an Inorganic - Perovskite Solar Cells Application

Prof. Diouma Kobor Moussa Touré Rémi Ndioukane Dr. Modou Tine Prof. Laurence Motte

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.5: Materials for Na-ion based energy storage
Session starts at 11:15 Lecture
On Improvements of Sodium Manganese Oxide Materials as Sodium-Ion Battery (NIB) Cathode

Dr. Nicolas Bucher Dr. Steffen Hartung Dr. Joseph B. Franklin Dr. Anna M. Wise Dr. Linda Y. Lim Han-Yi Chen Dr. Johanna Nelson Weker Dr. Michael F. Toney Prof. Madhavi Srinivasan

A10: Ferroelectric and Multiferroic Materials
A10.2: Ferroelectric and Multiferroic Materials II
Session starts at 11:15 Lecture
Electret-based electrostatic sensors for sub-nT magnetic fields

Stefan Schröder Sebastian Zabel Dr. Thomas Strunskus Prof. Dr. Franz Faupel

12:00
A01: High-Temperature Functional Materials
A01.2: Function and Structure
Session starts at 11:15 Lecture
High Temperature Oxidation of Chromium in air: Facts and Figure

Ali Solimani Prof. Mathias C. Galetz

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.5: Materials for Na-ion based energy storage
Session starts at 11:15 Lecture
Electrochemical characterization of a hard carbon/Na0.95Ni0.32Ti0.32Mg0.16Mn0.21O2 sodium-ion battery

Dr. Laida Otaegui

A10: Ferroelectric and Multiferroic Materials
A10.2: Ferroelectric and Multiferroic Materials II
Session starts at 11:15 Lecture
Multiferroic thin film characterization probed by Terahertz transient pulses

Moumita Dutta

12:15
A01: High-Temperature Functional Materials
A01.2: Function and Structure
Session starts at 11:15 Lecture
Crystallographic Processes Governing Memory Behaviour of Shape Memory Alloys

Prof. Dr. Osman Adiguzel

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.5: Materials for Na-ion based energy storage
Session starts at 11:15 Lecture
Comparative computational study of lithium and sodium insertion in van der Waals and covalent tetracyanoethylene (TCNE) -based crystals as promising materials for organic lithium and sodium ion batteries

Yingqian Chen Dr. Sergei Manzhos

A10: Ferroelectric and Multiferroic Materials
A10.2: Ferroelectric and Multiferroic Materials II
Session starts at 11:15 Lecture
Preparation of multifunctional thin films by combination of nanosized building blocks

Dipl.-Ing. Tobias Preller Prof. Dr. Georg Garnweitner

12:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.5: Materials for Na-ion based energy storage
Session starts at 11:15 Lecture
Solid state sodium battery with ceramic electrolyte and thin film electrodes cycling at room temperature

Marie Guin Katie Browning Dr. Frank Tietz Dr. Gabriel Veith Prof. Dr. Olivier Guillon

A10: Ferroelectric and Multiferroic Materials
A10.2: Ferroelectric and Multiferroic Materials II
Session starts at 11:15 Lecture
Identifying materials and their properties – how SpringerMaterials supports researchers in academia and industry

Dr. Michael Klinge

14:45
A11: Hierarchical Materials
A11.1: Session 1
Session starts at 14:45 Keynote Lecture
High Temperature Photonics

Prof. Dr. Manfred Eich

15:15
A11: Hierarchical Materials
A11.1: Session 1
Session starts at 14:45 Lecture
Self-Assembled Mechanical Metamaterials Based on Inverse Opals

Jefferson J. do Rosario Prof. Dr. Erica T. Lilleodden Martin Waleczek Dr. Roman Kubrin Dr. Alexander Yu. Petrov Dr. Pavel N. Dyachenko Julian E.C. Sabisch Prof. Dr. Kornelius Nielsch Prof. Dr. Norbert Huber Prof. Dr. Manfred Eich Prof. Dr. Gerold A. Schneider

15:30
A11: Hierarchical Materials
A11.1: Session 1
Session starts at 14:45 Lecture
Electrochemically Tunable Resistance of Nanoporous Metals Produced by Dealloying

Dipl.-Ing. Eva-Maria Steyskal Michael Seidl Prof. Roland Würschum

15:45
A11: Hierarchical Materials
A11.1: Session 1
Session starts at 14:45 Lecture
A numerical modelling approach to investigate the mechanical response of nanoporous gold using beam element

Dr. Jingsi Jiao Benedikt Roschning Prof. Dr. Norbert Huber

16:00
A11: Hierarchical Materials
A11.1: Session 1
Session starts at 14:45 Lecture
Electro-Polymerisation of Pyrrole in Porous Silicon - Interface-controlled Nano-Hybrids

Dr. Thomas F. Keller Guido Dittrich Prof. Dr. Patrick Huber

16:45
A11: Hierarchical Materials
A11.2: Session 2
Session starts at 16:45 Lecture
Innovative methods for production of hierarchically porous glasses with anisotropic pore structure.

Sharon Krenkel Prof. Dirk Enke Prof. Edda Rädlein Dr. Hans Uhlig

17:00
A11: Hierarchical Materials
A11.2: Session 2
Session starts at 16:45 Lecture
Dimerization of benzoic acid on TiO2 surfaces - an ab-initio study

Dr. Gregor Feldbauer Dr. Wolfgang Heckel Tim Würger Prof. Dr. Stefan Müller

17:15
A11: Hierarchical Materials
A11.2: Session 2
Session starts at 16:45 Lecture
Metallic-Ceramic Hierarchical Composite for Protection from Forcible Entry

Dr. Stefan Szyniszewski Kilian Fivaesh Dr. Rene Vogel Dr. Thomas Hipke

17:30
A11: Hierarchical Materials
A11.2: Session 2
Session starts at 16:45 Lecture
Design and additive manufacture of advanced geometries with functional gradients of mechanical properties and controlled surface topographies

Prof. Dr. Andres Diaz Lantada Adrian De Blas Romero

Thursday (29.09.2016)

09:15
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.1: Novel Functional Materials I
Session starts at 09:15 Keynote Lecture
Bonding of III-V semiconductors on patterned Si for photonics

Prof. Dr. Eric Le Bourhis

A09: Shape Memory Alloys - Basics and Applications
A09.1: Structure-property relationships in SMAs
Session starts at 09:15 Lecture
Cu-based shape memory alloys processed by selective laser melting

Dr.-Ing. Simon Pauly Tobias Gustmann Jonadabe Martins dos Santos Prof. Piter Gargarella Dr. Uta Kühn

09:30
A09: Shape Memory Alloys - Basics and Applications
A09.1: Structure-property relationships in SMAs
Session starts at 09:15 Lecture
Low-temperature creep and stress relaxation behavior of FeMnSi based shape memory alloys for prestressing applications

Dr. Ariyan Arabi-Hashemi Dr. Wook-Jin Lee Dr. Benedikt Weber Dr. Adrian Lis Dr. Christian Leinenbach

09:45
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.1: Novel Functional Materials I
Session starts at 09:15 Lecture
Flux Growth and Photocatalytic Water Oxidation Activity of Ta-Substituted BaNbO2N Crystals

Dr. Mirabbos Hojamberdiev Prof. Hajime Wagata Prof. Kunio Yubuta Prof. Shuji Oishi Prof. Kazunari Domen Prof. Katsuya Teshima

A09: Shape Memory Alloys - Basics and Applications
A09.1: Structure-property relationships in SMAs
Session starts at 09:15 Lecture
On austenite-martensite interface evolution in pseudoelastic NiTi ribbons

Steffen Pfeiffer Prof. Dr. Martin F.-X. Wagner

10:00
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.1: Novel Functional Materials I
Session starts at 09:15 Lecture
Effect of scandium content on structure and piezoelectric properties of AlScN films

Dr. Olaf Zywitzki Dr. Thomas Modes Dr. Stephan Barth Dr. Hagen Bartzsch Dr. Peter Frach

A09: Shape Memory Alloys - Basics and Applications
A09.1: Structure-property relationships in SMAs
Session starts at 09:15 Lecture
Stress relaxation in martensitic NiTi during uniaxial tensile testing

Dipl.-Ing. Cagatay Elibol Prof. Dr. Martin F.-X. Wagner

10:15
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.1: Novel Functional Materials I
Session starts at 09:15 Lecture
Growth and characterization of ZnO micro- and nanostructures synthetized from spent batteries.

Dr. Teresa Cebriano Dr. Irene García-Díaz Dr. Olga Rodríguez Ana López-Fernández Dr. Germán Escalante Prof. Dr. Paloma Fernández Prof. Dr. Félix Antonio López

A09: Shape Memory Alloys - Basics and Applications
A09.1: Structure-property relationships in SMAs
Session starts at 09:15 Lecture
An experimental and theoretical study on the role of copper interlayers for the microstructure of NiTi thin films on graphene substrates

Sandra Hahn Marcus Böhme Marc Pügner Dr. Torsten Hahn Prof. Dr. Martin F.-X. Wagner

10:30
A09: Shape Memory Alloys - Basics and Applications
A09.1: Structure-property relationships in SMAs
Session starts at 09:15 Lecture
Microstructural characteristics and functional behavior of Fe-Mn-Al-Ni

Malte Vollmer Philipp Krooß Dr. Mario Kriegel Prof. Dr. Ibrahim Karaman Dr. Anja Weidner Prof. Dr. Horst Biermann Prof. Dr. Thomas Niendorf

11:15
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.2: Novel Functional Materials II
Session starts at 11:15 Keynote Lecture
Vertical architecture for the next generation of microelectronic memories: from the materials point of view

Prof. Paula Vilarinho Prof. Dr. Paula Vilarinho

A09: Shape Memory Alloys - Basics and Applications
A09.2: High-temperature SMAs
Session starts at 11:15 Lecture
Impact of the Hf content on the energetics and elastic properties of NiTi1-xHfx studied from first principles

Mohammad Dehghani Dr. Juergen Spitaler Prof. Dr. Peter Puschnig Prof. Dr. Andrei Ruban

11:30
A09: Shape Memory Alloys - Basics and Applications
A09.2: High-temperature SMAs
Session starts at 11:15 Lecture
Ab-initio investigation of Ti-Ta high temperature shape memory alloys

Tanmoy Chakraborty Dr. Jutta Rogal Prof. Dr. Ralf Drautz

11:45
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.2: Novel Functional Materials II
Session starts at 11:15 Highlight Lecture
Low Voltage Scanning Electron Microscopy (LVSEM) with the EsB Detector: Applications in Microelectronics and Photovoltaics

Aránzazu Garitagoitia Cid Mona Sedighi Dr. Markus Loeffler Dr. Willem F. van Dorp Dr. Rüdiger Rosenkranz Prof. Dr. Ehrenfried Zschech

A09: Shape Memory Alloys - Basics and Applications
A09.2: High-temperature SMAs
Session starts at 11:15 Lecture
Processing and Functional Stability of Ti-Ta High Temperature Shape Memory Alloys

Alexander Paulsen Dr. Ramona Rynko Dr. Christoph Somsen Dr. Jan Frenzel Prof. Dr. Gunther Eggeler

12:00
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.2: Novel Functional Materials II
Session starts at 11:15 Lecture
Correlation of luminescent and electrical properties of ZnO under exposition to gas environments

Prof. Dr. Paloma Fernández Carlos Sardá Dr. Germán Escalante

A09: Shape Memory Alloys - Basics and Applications
A09.2: High-temperature SMAs
Session starts at 11:15 Lecture
Oxidation Behavior of Ti-Ta High Temperature Shape Memory Alloys

Dennis Langenkämper Alexander Paulsen Dr. Christoph Somsen Dr. Jan Frenzel Prof. Dr. Gunther Eggeler

12:15
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.2: Novel Functional Materials II
Session starts at 11:15 Lecture
Improved, photon conversion efficiency of Ce-Ti-O2 quantum dots nanofibers - like as electrode material for gas sensing application

Dr. Kaviyarasu Kasinathan

A09: Shape Memory Alloys - Basics and Applications
A09.2: High-temperature SMAs
Session starts at 11:15 Lecture
Influence of Phase-Stabilities, kinetic Processes and Texture on the structural and functional Stability of Ti-Ta(-X) High-Temperature Shape Memory Alloys

Alexander Reul Peter Kadletz Dr. Yahya Motemani Tanmoy Chakraborty Alexander Paulsen Dr. Ramona Rynko Dr. Jan Frenzel Dr. Jutta Rogal Dr. Christoph Somsen Prof. Dr. Wolfgang Schmahl Prof. Dr. Alfred Ludwig Prof. Dr. Gunther Eggeler Prof. Dr. Hans Jürgen Maier

12:30
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.2: Novel Functional Materials II
Session starts at 11:15 Lecture
Tungsten Oxide Inverse Opals for Hydrogen Sensing

Dr. Thorsten Wagner Sabrina Amrehn

A09: Shape Memory Alloys - Basics and Applications
A09.2: High-temperature SMAs
Session starts at 11:15 Lecture
On the Role of atomic Ordering on functional Fatigue of Co-Ni-Ga High-Temperature Shape Memory Single Crystals

Peter M. Kadletz Philipp Krooß Dr. Christoph Somsen Dr. Matthias J. Gutmann Prof. Dr. Yuri I. Chumlyakov Prof. Dr. Gunther Eggeler Prof. Dr. Wolfgang W. Schmahl Prof. Dr. Hans J. Maier Prof. Dr. Thomas Niendorf

reset

Search

(all)
Date
Search

© Deutsche Gesellschaft für Materialkunde e.V. Impressum   AGB