MSE 2016 - Full Program

Tuesday (27.09.2016)

10:45
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.1: Electrode Materials 1
Session starts at 10:45 Lecture
On the understanding of irreversible and reversible lithium storage within SiOC and SiCN ceramics

Dr. Magdalena Graczyk-Zajac Prof. Dr. Ralf Riedel

A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Keynote Lecture
Sol-gel derived silicon carbide for energy conversion

Dr. Bettina Friedel Olivia Kettner Prof. Dr. Robert Schennach Prof. Dr. Thomas Griesser

A04: Thermo-Chemical Materials for long term compact heat storage
A04.1: Session 1
Session starts at 10:45 Lecture
Inorganic crystal hydrates for heat storage: potential and limitations

Dr. Henk Huinink Dr. Pim Donkers Leyla Sogutoglu

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.1: Theoretical and experimental characterization of catalytic interfaces
Session starts at 10:45 Keynote Lecture
The importance of the electrochemical environment in the modeling of electrocatalytic processes

Prof. Dr. Axel Groß

B01: Very High Cycle Fatigue
B01.1: VHCF-I (Fundamentals)
Session starts at 10:45 Lecture
Novel high-throughput experiments for early damage evolution in fcc metals under VHCF loading

Dr.-Ing. Thomas Straub Michael Buck Prof. Dr. Chris Eberl

B05: Advances in Light-Metal Alloys and their Processing
B05.1: Session 1
Session starts at 10:45 Lecture
Effect of high intensity ultrasonic treatment on the microstructure, corrosion and mechanical behaviour of AC4C aluminium alloy

Dr. Ahmed Farrag Prof. Dr. Ahmed Abdel Aziz

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.1: Session 1
Session starts at 10:45 Keynote Lecture
Annealing strategies for ultra high-strength steels with enhanced formability

Dr. Stefan Van Bohemen Dr. David N. Hanlon

B13: Tribology across length-scales: experiments and simulations
B13.1: Session 1: from Nano to Micro
Session starts at 10:45 Highlight Lecture
Caviation of lubricants at the boundary between oleophilic and oleophobic surface regions

Prof. Dr. Lars Pastewka Dr. Daniele Savio Prof. Dr. Peter Gumbsch

C01: Protective Coatings and Functional Thin Films
C01.1: Electrodeposition, Chemical Vapor Deposition, Atomic Layer Deposition and Sol-Gel Processes
Session starts at 10:45 Lecture
Electrodeposition of Aluminium from ionic liquids: effects of the process parameters on morphology and corrosion resistance

Ph.D. Enrico Berretti Andrea Giaccherini Stefano Martinuzzi Dr. Stefano Caporali Dr. Lorenzo Cavaciocchi Dr. Leandro Luconi Prof. Massimo Innocenti

C03: Materials for Additive Manufacturing Technologies
C03.1: Metals for Additive Manufacturing Technologies
Session starts at 10:45 Keynote Lecture
Development of Space Hardware for Launcher and Satellite applications by Additive Manufacturing

Prof. Dr.-Ing. Fernando Lasagni Jorge Vilanova Antonio Periñán Laura Berrocal Rosario Fernández Borja Rodríguez Sergio González Carlos Galleguillos María José Aparicio Carlos Samartín

C05: Joining and Integration Issues of Composites
C05.1: Session 1
Session starts at 10:45 Lecture
Oxidative Chemical Vapor Deposition of Polymers for Printable and Flexible Photovoltaics

Dr.-Ing. Won Jun Jo Prof. Karen Gleason

D04: Small scale and in situ mechanical testing
D04.1: Micromechanical Testing - Microcompression
Session starts at 10:45 Highlight Lecture
Slip transfer through coherent Sigma 3 (111) twin boundaries loaded in different crystallographic direction: Insights by Laue microdiffraction

Nataliya Malyar Dr. Jean-Sebastian Micha Prof. Dr. Gerhard Dehm Dr. Christoph Kirchlechner

D07: High-resolution multiscale characterization
D07.1: Session 1 - Technical advances
Session starts at 10:45 Highlight Lecture
Single atom analysis of functional nanosystems using Atom Probe Tomography

Prof. Dr. Peter Felfer Prof. Julie Cairney

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.1: Bio-Interfaces and Antimicrobial Biomaterials I
Session starts at 10:45 Keynote Lecture
Self-regenerating Antimicrobial Surfaces – Towards a Technology Platform for New Materials and Devices

Dr. Karen Lienkamp Dr. Franziska Dorner

11:00
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.1: Electrode Materials 1
Session starts at 10:45 Lecture
Structure, thermodynamics and electrochemistry of SiOC electrodes from first-principles

Dr. Jochen Rohrer Prof. Dr. Karsten Albe

A04: Thermo-Chemical Materials for long term compact heat storage
A04.1: Session 1
Session starts at 10:45 Lecture
SrCl2—H2O system in view of thermochemical heat storage

Prof. Michael Steiger Dr. Konrad Posern Prof. Dr. Andrea Osburg Dr. Kirsten Linnow

B01: Very High Cycle Fatigue
B01.1: VHCF-I (Fundamentals)
Session starts at 10:45 Lecture
Microstructural Damage Evolution and VHCF Life Time Investigation of Small Scale BCC Stainless Steel (17-4PH)

Michael Buck Dr. Thomas Straub Prof. Dr. Chris Eberl

B05: Advances in Light-Metal Alloys and their Processing
B05.1: Session 1
Session starts at 10:45 Lecture
High-precision dilatometry as novel tool for in-situ real-time monitoring of aging processes in Al alloys

Prof. Dr. Roland Würschum Dr. Martin Luckabauer Elisabeth Henge Gregor Klinser Prof. Dr. Wolfgang Sprengel

B13: Tribology across length-scales: experiments and simulations
B13.1: Session 1: from Nano to Micro
Session starts at 10:45 Keynote Lecture
Microstructural changes and wear of Cu-based multilayer films under repeated sliding contact

Dr. Ruth Schwaiger Dr. Zhao-Ping Luo Dr. Stefan Sandfeld Prof. Guang-Ping Zhang

C01: Protective Coatings and Functional Thin Films
C01.1: Electrodeposition, Chemical Vapor Deposition, Atomic Layer Deposition and Sol-Gel Processes
Session starts at 10:45 Lecture
In-Situ Electro Codeposited Chromium Matrix Composite Coatings: Phase Transformations and Corrosion Behavior

Dr. Orkut Sancakoglu Guler Ungan Prof. Dr. Erdal Celik Prof. Dr. Tevfik Aksoy

C05: Joining and Integration Issues of Composites
C05.1: Session 1
Session starts at 10:45 Lecture
Modification of the adhesion mechanisms at the interface between CrMnNi TRIP steel and ZrO2 by a Ti coated Mg-PSZ powde

Dr. Stefan Martin Daniela Penther Prof. Dr. David Rafaja Dr. Christian Weigelt Prof. Dr. Christos G. Aneziris Andreas Eder Prof. Dr. Christoph Eisenmenger-Sittner

D04: Small scale and in situ mechanical testing
D04.1: Micromechanical Testing - Microcompression
Session starts at 10:45 Lecture
Microscopic incompatibility controlling plastic deformation of bicrystals

Dr.-Ing. Michael Marx Dr. Alain Franz Knorr Dr. Nousha Kheradmand Yun Deng

D07: High-resolution multiscale characterization
D07.1: Session 1 - Technical advances
Session starts at 10:45 Lecture
Photon energy becomes the 3rd dimension in crystallographic texture analysis - high resolution mapping of complex materials

Prof. Dr. Helga C. Lichtenegger Dr. Tilman Grünewald Dr. Harald Rennhofer Pieter Tack Dr. Jan Garrevoet Dr. Didier Wermeille Dr. Paul Thompson Dr. Wim Bras Prof. Dr. Laszlo Vincze

11:15
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.1: Electrode Materials 1
Session starts at 10:45 Lecture
Synthesis and Stabilization of Amorphous/Crystalline 3D Nano Silicon

Dragoljub Vrankovic Kerstin Wissel Prof. Dr. Ralf Riedel Dr. Magdalena Graczyk-Zajac

A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Highlight Lecture
Oxidation of CO utilising CuFe2O4 based carbon nanotube catalysts for use in fuel cells

Dr. Darko Hanzel Dr. Venkata D. B. C. Dasireddy Prof. Krish Bharuth-Ram Prof. Blaž Likozar

A04: Thermo-Chemical Materials for long term compact heat storage
A04.1: Session 1
Session starts at 10:45 Lecture
Stability of salt hydrates during cyclic loading/unloading

Dr. Pim Donkers Prof. Dr. Olaf Adan Prof. Dr. David Smeulders Dr. Leo Pel

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.1: Theoretical and experimental characterization of catalytic interfaces
Session starts at 10:45 Highlight Lecture
Towards understanding the mechanism of water splitting on TiO2

Ellen Backus Simon Schmitt Saman Hosseinpour

B01: Very High Cycle Fatigue
B01.1: VHCF-I (Fundamentals)
Session starts at 10:45 Lecture
Characterization of Dislocation Structure Evolution under Cyclic Loading by Discrete Dislocation Dynamics

Taymour El-Achkar Dr. Daniel Weygand

B05: Advances in Light-Metal Alloys and their Processing
B05.1: Session 1
Session starts at 10:45 Highlight Lecture
Microstructure and mechanical properties of in situ Ti-TiB based composite materials produced by casting and subjected to hot working

Prof. Valery Imayev Ramil Gaisin Prof. Renat Imayev

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.1: Session 1
Session starts at 10:45 Highlight Lecture
Effect of microstructure on fatigue behavior of advanced high strength steels produced by quenching and partitioning and the role of retained austenite

Dr.-Ing. Irene De Diego Calderon Dr. Pablo Rodriguez-Calvillo Dr. Antoni Lara Dr. Jon Molina-Aldareguia Prof. Dr. Roumen Petrov Dr. Dorien De Knijf Dr. Ilchat Sabirov

C01: Protective Coatings and Functional Thin Films
C01.1: Electrodeposition, Chemical Vapor Deposition, Atomic Layer Deposition and Sol-Gel Processes
Session starts at 10:45 Lecture
New approach for surface layer modification of galvanic Zn-Ni alloy coatings

Dr.-Ing. Artur Maciej Wojciech Simka Maciej Sowa Joanna Michalska Tadeusz Gorewoda Marta Kubiczek Grzegorz Dercz Robert Socha

C03: Materials for Additive Manufacturing Technologies
C03.1: Metals for Additive Manufacturing Technologies
Session starts at 10:45 Lecture
Selective Electron Beam Melting (SEBM) of Pure Copper – from Process Development to Properties

Ralf Guschlbauer Dr. Matthias A. Lodes Prof. Dr. Carolin Körner

C05: Joining and Integration Issues of Composites
C05.1: Session 1
Session starts at 10:45 Lecture
Deposition of metal-matrix Ti–NiAl composites onto substrate surface by in-situ combustion synthesis: Numerical modeling

Dr. Dmitrii Andreev Prof. Dr. Konstantin Shkadinsky Prof. Dr. Vladimir Yukhvid Dr. Vladimir Sanin

D04: Small scale and in situ mechanical testing
D04.1: Micromechanical Testing - Microcompression
Session starts at 10:45 Lecture
Cyclic deformation of micro-pillars machined into selected grain boundaries of polycrystalline nickel

Moritz Wenk Dr. Jonas Groten Dr. Ruth Schwaiger

D07: High-resolution multiscale characterization
D07.1: Session 1 - Technical advances
Session starts at 10:45 Lecture
In-situ nano-tomography at the new nano-analysis id16b beamline at the esrf

Dr. Julie Villanova Dr. Rémi Daudin Dr. Pierre Lhuissier Dr. Luc Salvo Dr. David Jauffrès Dr. Christophe Louis Martin Dr. Rémi Tucoulou

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.1: Bio-Interfaces and Antimicrobial Biomaterials I
Session starts at 10:45 Lecture
Nano contact points control initial microbial adhesion on biomaterials surfaces

Carolin Dewald Dr. Claudia Lüdecke-Beyer Dr. Martin Roth Dr. Jörg Bossert Prof. Dr. Klaus D. Jandt

11:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.1: Electrode Materials 1
Session starts at 10:45 Lecture
Phase stabilities in the system Li-Si-Sn-C – an experimental study

Martin Drüe Artem Kozlov Martin Seyring Xiaoyan Song Rainer Schmid-Fetzer Markus Rettenmayr

A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Lecture
Influence of GITC (guanidinium thiocyanate) on the performance of MAPbI3 perovskite solar cells by two step solution processing

Senol Öz Eunhwan Jung Senol Oez Ripon Bhattacharjee Prof. Dr. Hongxia Wang Prof. Dr. Sanjay Mathur

A04: Thermo-Chemical Materials for long term compact heat storage
A04.1: Session 1
Session starts at 10:45 Lecture
Microencapsulation of calcium chloride for enhanced thermochemical energy storage

Dr. Joris Salari

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.1: Theoretical and experimental characterization of catalytic interfaces
Session starts at 10:45 Lecture
Water at solid/water interfaces: structure and spectroscopy

Dr. Marialore Sulpizi

B01: Very High Cycle Fatigue
B01.1: VHCF-I (Fundamentals)
Session starts at 10:45 Lecture
Early stages of fatigue damage of plain carbon steels at the transition from the high cycle fatigue to the very high cycle fatigue regime

Jochen Bach Johannes Joel Möller Prof. Dr. Erik Bitzek Dr. Heinz Werner Höppel Prof. Dr. Mathias Göken

B05: Advances in Light-Metal Alloys and their Processing
B05.1: Session 1
Session starts at 10:45 Highlight Lecture
Influence of filler wire on the microstructure and mechanical properties of laser beam welded Ti-6Al-4V butt-joints

Dipl.-Ing. Fedor Fomin Dr. Nikolai Kashaev Dr. Volker Ventzke Stefan Riekehr

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.1: Session 1
Session starts at 10:45 Lecture
Investigation into the thermal mechanical properties, hydrogen embrittlement and fracture toughness of quenching and partitioning (Q&P) sheet steels

Ph.D. Lianbo Luo Dr. Wei Li Prof. Xuejun Jin

B13: Tribology across length-scales: experiments and simulations
B13.1: Session 1: from Nano to Micro
Session starts at 10:45 Highlight Lecture
Tribological Properties of Nanoparticles: from Superlubricity to Contact Ageing

Dr. Dirk Dietzel Prof. Dr. André Schirmeisen

C01: Protective Coatings and Functional Thin Films
C01.1: Electrodeposition, Chemical Vapor Deposition, Atomic Layer Deposition and Sol-Gel Processes
Session starts at 10:45 Lecture
Ultra high quality metallic thin films from air stable and volatile precursors via radical enhanced ALD – a simple way to base metal thin film fabrication

Alexander Sasinska Jennifer Leduc Dr. Lisa Czympiel Miroslav Soroka Prof. Dr. Sanjay Mathur

C03: Materials for Additive Manufacturing Technologies
C03.1: Metals for Additive Manufacturing Technologies
Session starts at 10:45 Lecture
Experience of “Kompozit” company in production of parts from VT6S alloy using electron beam melting technology

Dr. Alla Logacheva Dr. Ivan Logachev Zhanna Sentyurina

C05: Joining and Integration Issues of Composites
C05.1: Session 1
Session starts at 10:45 Lecture
Characterization of glassy solders and joining layers between silicon carbide substrates and glass/glass-ceramic solders

Sarfraz Ahmad

D04: Small scale and in situ mechanical testing
D04.1: Micromechanical Testing - Microcompression
Session starts at 10:45 Lecture
Micromechanical testing of individual microstructure elements in lead-free solder joints

Dr. Bastian Philippi Dr. Johannes Zechner Dr. Kurt Matoy Dr. Christoph Kirchlechner Prof. Dr. Gerhard Dehm

D07: High-resolution multiscale characterization
D07.1: Session 1 - Technical advances
Session starts at 10:45 Highlight Lecture
Measuring local strain fields during in situ deformation using STEM diffraction mapping

Christoph Gammer Prof. Jürgen Eckert Prof. Andrew M. Minor

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.1: Bio-Interfaces and Antimicrobial Biomaterials I
Session starts at 10:45 Lecture
Copper materials for infection prevention in hospitals and on the ISS

Jiaqi Luo Dr. Michael Hans Dr. Ralf Möller Prof. Dr. Frank Mücklich

11:45
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.1: Electrode Materials 1
Session starts at 10:45 Lecture
Coulometric titration in the system Cu-Li-Sb: Thermodynamic, structural and kinetic aspects

Alexander Beutl

A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Lecture
Strategies for the efficiency enhancement of solar carbon dioxide photoreduction: towards the chemical storage of solar energy.

Ph.D. Sebastian Murcia Dr. Cristian Fabrega Dr. Maria Dolores Hernandez-Alonso Dr. German Penelas Prof. Dr. Joan Ramon Morante Dr. Teresa Andreu

A04: Thermo-Chemical Materials for long term compact heat storage
A04.1: Session 1
Session starts at 10:45 Lecture
Encapsulation of CaO/Ca(OH)2 for Thermochemical Energy Storage

Sandra Afflerbach Burkhard Görtz Prof. Dr. Reinhard Trettin

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.1: Theoretical and experimental characterization of catalytic interfaces
Session starts at 10:45 Lecture
The Structure and Proton Dynamics of Water at Metal Surfaces

Prof. Dr. Rengin Pekoz Prof. Dr. Davide Donadio

B01: Very High Cycle Fatigue
B01.1: VHCF-I (Fundamentals)
Session starts at 10:45 Lecture
Atomistic simulations in the context of very high cycle fatigue (VHCF): crack nucleation, propagation, and microstructure interaction

Prof. Dr. Erik Bitzek Johannes Joel Möller

B05: Advances in Light-Metal Alloys and their Processing
B05.1: Session 1
Session starts at 10:45 Lecture
Wear resistance of Ti-based bulk metallic glasses under extreme environmental conditions

Dr.-Ing. Kathrin Grätz Dr. Douglas C. Hofmann Prof. Christopher A. Schuh

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.1: Session 1
Session starts at 10:45 Lecture
The effect of stress triaxiality and elemental distribution on crack propagation in a QP steel investigated by quasi in situ 3-point bending

Zhuangming L i Dr. Stefan Zaefferer Dr. Richard Thiessen Prof. Dr. Dierk Raabe

B13: Tribology across length-scales: experiments and simulations
B13.1: Session 1: from Nano to Micro
Session starts at 10:45 Lecture
Dislocation structures in high-purity copper under a unidirectional linear tribological load

Zhilong Liu Dr. Reinhard Schneider Dr. Lars Pastewka Prof. Dr. Peter Gumbsch Dr. Christian Greiner

C01: Protective Coatings and Functional Thin Films
C01.1: Electrodeposition, Chemical Vapor Deposition, Atomic Layer Deposition and Sol-Gel Processes
Session starts at 10:45 Lecture
Synthesis and Characterization of sol gel derived ZrO2 coatings

Prof. Dr. Ali Aydin Goktas Ahmet Cagri Kilinç Ahmet Cagri Kilinc

C03: Materials for Additive Manufacturing Technologies
C03.1: Metals for Additive Manufacturing Technologies
Session starts at 10:45 Lecture
Investigations on additively generated functionally graded multi-material consisting out of 316L stainless steel and bronze

Florian Hengsbach Dr. Kay-Peter Hoyer Peter Koppa Dr. Martin Joachim Holzweissig Prof. Dr. Thomas Tröster Prof. Dr. Mirko Schaper

C05: Joining and Integration Issues of Composites
C05.1: Session 1
Session starts at 10:45 Lecture
Interface microstructure of cohesive regions in aluminum/aluminum and aluminum/steel joints produced by magnetic pulse welding

Dipl.-Ing. Semen Sharafiev Anatoli Rebensdorf Christian Pabst Prof. Dr. Martin Franz-Xaver Wagner Prof. Dr. Stefan Böhm Prof. Dr. Peter Groche

D04: Small scale and in situ mechanical testing
D04.1: Micromechanical Testing - Microcompression
Session starts at 10:45 Lecture
Size and orientation effects on the elasto-plastic transition and deformation mechanism of twinning-induced plasticity steel micro-pillars

Wonseok Choi Dr. Stefanie Sandlöbes Nataliya Malyar Dr. Christoph Kirchlechner Prof. Dr. Bruno C. De Cooman Prof. Dr. Dierk Raabe

D07: High-resolution multiscale characterization
D07.1: Session 1 - Technical advances
Session starts at 10:45 Lecture
High-resolution Multi-scale Characterization of Battery Materials by Combination of X-ray Microscopy with FIB-SEM Tomography

Andreas Kopp Timo Bernthaler Christian Weisenberger Tim Schubert Denny Schmidt Volker Knoblauch Holger Blank Fabián Pérez-Willard Gerhard Schneider Tobias Volkenandt

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.1: Bio-Interfaces and Antimicrobial Biomaterials I
Session starts at 10:45 Lecture
Primary Adhesion of Bacteria on Plasma Modified Polycarbonate

Nathalie Stefani Kerstin Lohbauer Philipp Häfner Prof. Dr. Hans-Achim Reimann

12:00
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.1: Electrode Materials 1
Session starts at 10:45 Lecture
Phase Field Modeling of Phase Segregation and Electrochemically induced Fracture in Li-ion Battery Electrode Materials

Dr. Bai-Xiang Xu Ying Zhao Dr. Peter Stein

A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Oral Poster
Up-conversion in perovskite strontium stannate nanocrystals for application in dye-sensitized solar cell

Dr. Ashok Kumar Vikas Sahrawat

A04: Thermo-Chemical Materials for long term compact heat storage
A04.1: Session 1
Session starts at 10:45 Lecture
Thermochemical heat storage by magnesium and calcium hydroxides doped by inorganic salts

Aleksandr Shkatulov Prof. Yuri Aristov

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.1: Theoretical and experimental characterization of catalytic interfaces
Session starts at 10:45 Lecture
State-to-state energy transfer in interaction of nitrogen oxide molecules with films of Vanadium Dioxide

Dr. Igor Rahinov Anita Pilipody Artur Meling Bastian Krueger Dr. Tim Schaefer Dr. Vladimir Tsionsky Prof. Sergey Cheskis Prof. Dr. Alec Wodtke

B01: Very High Cycle Fatigue
B01.1: VHCF-I (Fundamentals)
Session starts at 10:45 Lecture
Statistical evaluation of the failure-relevance of inhomogeneities and defects on crack initiation in the VHCF regime

Prof. Dr. Martina Zimmermann Anton Kolyshkin Prof. Dr. Edgar Kaufmann Prof. Dr. Hans-Jürgen Christ

B05: Advances in Light-Metal Alloys and their Processing
B05.1: Session 1
Session starts at 10:45 Lecture
grain refinement of AZ31 magnesium alloy by new thermomechanical treatment process (Stir friction)

Prof. El-Zahraa El-Baradie Prof. Dr. Abd El-Hamid Hussein Prof. Dr. Salah Ezz

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.1: Session 1
Session starts at 10:45 Lecture
Flash Annealing of Q&P steels

Prof. Dr. Roumen Petrov Dr. Dorien De Knijf Athina Puype Prof. Dr. Leo Kestens

B13: Tribology across length-scales: experiments and simulations
B13.1: Session 1: from Nano to Micro
Session starts at 10:45 Lecture
Dislocation microstructure evolution in tribological contacts

Johanna Gagel Dr. Daniel Weygand Prof. Peter Gumbsch

C01: Protective Coatings and Functional Thin Films
C01.1: Electrodeposition, Chemical Vapor Deposition, Atomic Layer Deposition and Sol-Gel Processes
Session starts at 10:45 Lecture
FEA study of the electrodeposition of Al from ILs: definition of a pilot plant model for an industrial scale-up.

Andrea Giaccherini Enrico Berretti Stefano Martinuzzi Dr. Alessandro Lavacchi Dr. Stefano Caporali Prof. Massimo Innocenti

C03: Materials for Additive Manufacturing Technologies
C03.1: Metals for Additive Manufacturing Technologies
Session starts at 10:45 Lecture
Efficient production of oxide dispersed metallic materials by utilising atmospheric reactions in liquid metal deposition

Christian Baron Dr. Hauke Springer Prof. Dr. Dierk Raabe

C05: Joining and Integration Issues of Composites
C05.1: Session 1
Session starts at 10:45 Lecture
Spot weldable force transmission elements in fibre reinforced thermoplastic (FRTP) automotive panels

Arne Kunze Dr. Axel von Hehl

D04: Small scale and in situ mechanical testing
D04.1: Micromechanical Testing - Microcompression
Session starts at 10:45 Lecture
Elevated temperature micropillar compression transient tests on nanocrystalline Palladium-Gold: Probing activation parameters at the lower limit of crystallinity

Juri Wehrs Michael Johannes Deckarm Jeffrey M. Wheeler Xavier Maeder Rainer Birringer Johann Michler

D07: High-resolution multiscale characterization
D07.1: Session 1 - Technical advances
Session starts at 10:45 Lecture
Applications of site-specific atom probe specimen preparation by focused ion beam and transmission Kikuchi diffraction

Dipl.-Ing. Christoph Turk Katharina Babinsky David Lang Philipp Haselberger Dr. Christina Hofer Dr. Sophie Primig Prof. Dr. Helmut Clemens

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.1: Bio-Interfaces and Antimicrobial Biomaterials I
Session starts at 10:45 Lecture
Antibacterial activity of durable micro- and nano-scale Titanium surfaces generated via ultra-short pulsed laser ablation

Dipl.-Ing. Rocio Ortiz Dr. Iban Quintana

12:03
A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Oral Poster
Zero-dimensional(CH3NH3)3Bi2I9 perovskiteforoptoelectronic applications

Senol Öz Jan-Christoph Hebig Eunhwan Jung Dr. Trilok Singh Asish Lepcha Dr. Selina Olthof Yajun Gao Raphael German Prof. Dr. Paul H.M. van Loosdrecht Prof. Dr. Thomas Kirchartz Prof. Dr. Klaus Meerholz Prof. Dr. Sanjay Mathur

12:06
A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Oral Poster
Charge transfer characterization on Atomic Layer Deposited TiO2 protective and conductive layers for Photoelectrochemical Solar Fuels

Dr. Nina M. Carretero Dr. Teresa Andreu Prof. Juan Ramon Morante Ph.D. Carles Ros

12:09
A03: Materials for Energy Engineering
A03.1: Fuel cells and photovoltaics
Session starts at 10:45 Oral Poster
Size and Shape Effects on Deformation/Fracture Behavior of Vanadium Alloy Membrane for Hydrogen Separation and Purification

Prof. Dr. Yoshihisa Matsumoto Keita Himeno

14:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.2: Electrode Materials 2
Session starts at 14:30 Lecture
Determination of the Enthalpy of Mixing in the LiFePO4-FePO4-System at 25 °C via Isothermal Titration Calorimetry

Christian Thomas Dr. Regina Hüttl Dr. Jürgen Seidel Prof. Dr. Florian Mertens

A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Keynote Lecture
Industry-relevant production technology of thermoelectric materials for waste heat recovery

Dr. Christian Stiewe Reinhard Sottong Prof. Dr. Eckhard Müller

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.2: Electrochemical properties at interfaces and catalysts: from multiscale modelling to applications
Session starts at 14:30 Keynote Lecture
Ab initio study of the Solvent-Electrode Interface in Li/Ion battery Materials

Prof. Dr. Jean-Sébastien Filhol Dr. Nicolas Lespes

B01: Very High Cycle Fatigue
B01.2: VHCF II (Ductile Steels)
Session starts at 14:30 Lecture
Influence of the austenite stability on the very high cycle fatigue behavior of austenitic stainless steels

Prof. Dr. Martina Zimmermann Andrei Grigorescu Philipp-Malte Hilgendorff Prof. Dr. Claus-Peter Fritzen Prof. Dr. Hans-Jürgen Christ

B10: Surface Engineering and Functionalisation
B10.1: Session 1:B10
Session starts at 14:30 Lecture
Last developments for large area microstructuring using direct laser interference patterning: towards high-speed roll to roll processing

Prof. Dr.-Ing. Andrés Fabián Lasagni Valentin Lang Andreas Rank Dr. Tim Kunze Matthias Bieda Dr. Denise Günther Anne Gärtner Christoph Zwahr Dr. Teja Roch

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.2: Session 2
Session starts at 14:30 Keynote Lecture
Manganese Alloying of Quenching and Partitioning Steels

Dr.-Ing. Emmanuel De Moor Joonas Kähkönen Prof. Dr. David K. Matlock Prof. Dr. John G. Speer

B13: Tribology across length-scales: experiments and simulations
B13.2: Session 2: from Micro to Meso
Session starts at 14:30 Lecture
Load-Dependent Frictional Response of Vertically Aligned Single-Walled Carbon Nanotube Surfaces

Andrew Westover Dr. Cary Pint Dr. Shigeo Maruyama Dr. Junho Choi

C01: Protective Coatings and Functional Thin Films
C01.2: Multifunctional Coatings, Thin Films and Surfaces for Engineering Applications
Session starts at 14:30 Lecture
Protective Aluminum Diffusion Coatings for Refractory Metals: Investigation of Diffusion Process and Oxidation Resistance

Anke Silvia Ulrich Dr. Mathias Christian Galetz Dr. Emanuel Ionescu Prof. Dr. Ralf Riedel

C03: Materials for Additive Manufacturing Technologies
C03.2: Characterization of AM materials
Session starts at 14:30 Keynote Lecture
Microstructure of additive manufactured materials studied by energy resolved neutron imaging

Dr. Anton Tremsin Dr. Yan Gao Dr. Francesco Grazzi Dr. Takenao Shinohara

D04: Small scale and in situ mechanical testing
D04.2: Micromechanical Testing - Nanoindentation I
Session starts at 14:30 Lecture
Evolution of dislocation structure around and underneath the indentation in single crystalline strontium titanate

Farhan Javaid Dr. Karsten Durst

D07: High-resolution multiscale characterization
D07.2: Session 2 - Applications
Session starts at 14:30 Lecture
The hydration of silicates investigated by HRSEM and APT

Dr. Thomas Sowoidnich Prof. Dr. Derk Joester Dr. Lyle Gordon Dr. Frank Bellmann Prof. Dr. Horst-Michael Ludwig

E05: Atomistic origin of ductility
E05.1: Session 1
Session starts at 14:30 Keynote Lecture
Free energy function of dislocation densities by large scale atomistic simulation

Prof. Dr. Alexander Hartmaier Dr. Christoph Begau Dr. Godehard Sutmann

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.2: Bio-Interfaces and Antimicrobial Biomaterials II
Session starts at 14:30 Lecture
Controlled release of antibacterial agents and anti-inflammatories from Alginate-Chitosan coated silicone based hydrogels

Ph.D. Diana Silva Dr. Luís F. V. Pinto Prof. Dr. Luís F. Santos Prof. Dr. Ana Paula Serro Prof. Dr. Benilde Saramago

F06: Biomaterials for Tissue Engineering
F06.1: Session 1
Session starts at 14:30 Keynote Lecture
Morphogenetically active biomaterials: An end to end solution for dental and orthopedic bone regeneration

Prof. Dr. Werner E.G. Müller Prof. Dr. Xiaohong Wang

14:45
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.2: Electrode Materials 2
Session starts at 14:30 Lecture
Phase field modeling of Li-insertion kinetics in single LiFePO4 nano-particles for rechargeable Li-ion battery application

Dr. Michael Fleck Philipp Amendt Holger Federmann Prof. Dr. Heike Emmerich

B01: Very High Cycle Fatigue
B01.2: VHCF II (Ductile Steels)
Session starts at 14:30 Lecture
Simulation of the VHCF deformation behavior of austenitic stainless steels

Philipp-Malte Hilgendorff Andrei Grigorescu Prof. Dr. Martina Zimmermann Prof. Dr. Claus-Peter Fritzen Prof. Dr. Hans-Jürgen Christ

B10: Surface Engineering and Functionalisation
B10.1: Session 1:B10
Session starts at 14:30 Lecture
Fabrication of hierarchical micro patterns on PET substrates using direct laser interference patterning

Dipl.-Ing. Florian Rößler Dr. Denise Günther Prof. Dr. Andrés Fabian Lasagni

B13: Tribology across length-scales: experiments and simulations
B13.2: Session 2: from Micro to Meso
Session starts at 14:30 Keynote Lecture
Predicting Friction of Metals from Atomistic Mechanisms: A Microstructural Evolution Model

Dr. Michael Chandross Prof. Dr. Shengfeng Cheng Dr. Nicolas Argibay

C01: Protective Coatings and Functional Thin Films
C01.2: Multifunctional Coatings, Thin Films and Surfaces for Engineering Applications
Session starts at 14:30 Lecture
Investigations to the oxidation behavior, interdiffusion and phase evolution of Cr2AlC thin films with IN718 substrate

Stefan Heinze Prof. Dr. Christoph Leyens Dr. Otmar Zimmer Frank Kaulfuß

D04: Small scale and in situ mechanical testing
D04.2: Micromechanical Testing - Nanoindentation I
Session starts at 14:30 Lecture
Nanoindentation of heterogeneous materials: method refinements and limitations

Clemence Bos Dr. Heinz Riesch-Oppermann Dr. Ruth Schwaiger

D07: High-resolution multiscale characterization
D07.2: Session 2 - Applications
Session starts at 14:30 Lecture
APT&TEM correlative characterization of linear complexions in a Fe9wt.%Mn martensitic steel

Alisson Kwiatkowski da Silva Dr. Margarita Kuzmina Dr. Dirk Ponge Dr. Michael Herbig Dr. Stefanie Sandloebes Prof. Dr. Dirk Raabe Dr. Baptiste Gault

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.2: Bio-Interfaces and Antimicrobial Biomaterials II
Session starts at 14:30 Lecture
Antimicrobial and Protein-resistant Polymer Coatings for Materials Applications

Dr. Karen Lienkamp Maria Vöhringer Julia S. Saar Wibke Hartleb Monika Kurowska Prof. Dr. Ali Al-Ahmad

15:00
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.2: Electrode Materials 2
Session starts at 14:30 Lecture
Experimental investigations and modeling in the Li-Co-O lithium-ion battery system

Nicolas Mayer Dr. Petronela Gotcu-Freis Dr. Thomas Ludwig Reichmann Dr. Maren Lepple Dr. Damian Marlon Cupid Prof. Dr. Hans Jürgen Seifert

A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Lecture
Interface characterization by computational methods of phase separated NiSn-based thermoelectric half-Heuslers.

Dr. Joaquin Miranda Dr. Thomas Gruhn Prof. Dr. Heike Emmerich

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.2: Electrochemical properties at interfaces and catalysts: from multiscale modelling to applications
Session starts at 14:30 Lecture
First-Principles Prediction of the Electrochemical Stability of Bimetallic Catalysts for Use as Fuel Cell Electrodes

Prof. Ismaila Dabo

B01: Very High Cycle Fatigue
B01.2: VHCF II (Ductile Steels)
Session starts at 14:30 Lecture
Slip Band Formation and Crack Initiation during Very High Cycle Fatigue of Duplex Stainless Steel – Part 1: Mechanical Testing and Microstructural Investigations

Tina Waurischk Marcus Söker Alexander Giertler Benjamin Dönges Prof. Hans-Jürgen Christ Prof. Ulrich Krupp

B10: Surface Engineering and Functionalisation
B10.1: Session 1:B10
Session starts at 14:30 Lecture
Scuffing Prevention by Surface Texturing

Dr. Kilian Wasmer Dr. Fatemeh Saeidi Dr. Bastian Meylan Patrik Hoffmann

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.2: Session 2
Session starts at 14:30 Highlight Lecture
The influence of Nb and Nb+Mo additions on the properties of hot rolled Q&P steel

Dr.-Ing. Dorien De Knijf Cecilia Föjer Steven G. Jansto

C01: Protective Coatings and Functional Thin Films
C01.2: Multifunctional Coatings, Thin Films and Surfaces for Engineering Applications
Session starts at 14:30 Lecture
Carbon coatings for membrane application and catalysis

Prof. Dr. Ingolf Voigt Adrian Simon Dr. Norman Reger-Wagner Dr. Hannes Richter

C03: Materials for Additive Manufacturing Technologies
C03.2: Characterization of AM materials
Session starts at 14:30 Lecture
Characterization of defects in additive manufactured hypereutectic AlSi alloys

Dipl.-Ing. Enrico Hilpert Dr. Stefan Risse

D04: Small scale and in situ mechanical testing
D04.2: Micromechanical Testing - Nanoindentation I
Session starts at 14:30 Lecture
Dynamic indentation testing: Is there an influence on mechanical properties?

Prof. Dr. Daniel Kiener Prof. Megan J. Cordill Dr. Verena Maier-Kiener Dipl.-Ing. Alexander Leitner

D07: High-resolution multiscale characterization
D07.2: Session 2 - Applications
Session starts at 14:30 Lecture
Combined EBSD, TEM and APT characterization of nitrided maraging steel

Ph.D. An Verdiere Dr. Christina Hofer Dr. Bliznuk Vitaliy Prof. Dr. Roumen Petrov Prof. Dr. Leo Kestens

E05: Atomistic origin of ductility
E05.1: Session 1
Session starts at 14:30 Highlight Lecture
Molecular dynamics simulations of dislocation dynamics

Prof. Guy Makov Eyal Oren

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.2: Bio-Interfaces and Antimicrobial Biomaterials II
Session starts at 14:30 Lecture
Bioinspired fabrication of conducting SnO2 film on polymeric substrates

Dr. Boukerma Kada

F06: Biomaterials for Tissue Engineering
F06.1: Session 1
Session starts at 14:30 Lecture
Studies the effect of silver hydroxyapatite on Osteoblast cell as a potential material for bone regeneration applications

Dr. Nida Iqbal Prof. M. R. Abdul Kadir Dr. Krishnamurithy gand Prof. Kamaru Tunku

15:15
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.2: Electrode Materials 2
Session starts at 14:30 Lecture
Thermochemistry of selected compositions in the LiNiO2-LiCoO2-LiMnO2 system as promising lithium ion battery cathode materials

Maryam Masoumi Dr. Damian Cupid Dr. Thomas Reichmann Prof. Hans Jürgen Seifert

A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Lecture
Oxide thermoelectrics: from materials to multilayer thermoelectric generators

Prof. Dr. Jörg Töpfer Timmy Reimann Thomas Schulz Arne Bochmann Prof. Dr. Steffen Teichert Andy Vogel Beate Capraro

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.2: Electrochemical properties at interfaces and catalysts: from multiscale modelling to applications
Session starts at 14:30 Lecture
Solar Water Splitting by Doping-Treated BiVO4

Dr.-Ing. Won Jun Jo Prof. Karen Gleason Prof. Jae Sung Lee

B01: Very High Cycle Fatigue
B01.2: VHCF II (Ductile Steels)
Session starts at 14:30 Lecture
Slip Band Formation and Crack Initiation during Very High Cycle Fatigue of Duplex Stainless Steel – Part 2: High Energy X-Ray Diffraction Analysis

Amir Tosson Prof. Dr. Ullrich Pietsch

B10: Surface Engineering and Functionalisation
B10.1: Session 1:B10
Session starts at 14:30 Lecture
Patterning on different scales to guide lubricants effectively

Philipp Grützmacher Dr. Carsten Gachot Dr. Andreas Rosenkranz

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.2: Session 2
Session starts at 14:30 Lecture
The role of silicon in high carbon (1 wt.% C) Q&P steels

Dr. Bij-Na Kim Lee Prof. Dr. Jilt Sietsma Dr. Maria J. Santofimia

B13: Tribology across length-scales: experiments and simulations
B13.2: Session 2: from Micro to Meso
Session starts at 14:30 Lecture
The advantages and challenges of nanotribology

Dr. Steffen Brinckmann Caroline A.C. Fink Prof. Dr. Gerhard Dehm

C01: Protective Coatings and Functional Thin Films
C01.2: Multifunctional Coatings, Thin Films and Surfaces for Engineering Applications
Session starts at 14:30 Lecture
Heterostructured Nd2Sn2O7 thin films for water splitting: Molecular Approach to Rare Earth Metal Pyrochlores

Aida Jamil Dr. Johannes Schlaefer Ashish Lepcha Prof. Dr. Sanjay Mathur

C03: Materials for Additive Manufacturing Technologies
C03.2: Characterization of AM materials
Session starts at 14:30 Lecture
Influence of laser re-melting on density, microstructure, transformation behaviour and mechanical properties of selective laser melted Cu-Al-Ni-Mn shape-memory parts

Dr.-Ing. Tobias Gustmann Dr. Uta Kühn Prof. Piter Gargarella Dr. Simon Pauly

D04: Small scale and in situ mechanical testing
D04.2: Micromechanical Testing - Nanoindentation I
Session starts at 14:30 Lecture
In-situ observation of martensitic transformations in NiTi single crystals during thermal cycling by nanoindentation experiments

Sandra Hahn Prof. Dr. Martin F.-X. Wagner

D07: High-resolution multiscale characterization
D07.2: Session 2 - Applications
Session starts at 14:30 Lecture
Structural characteristics of corrosion products of ferritic high temperature alloys studied by multi-scale characterization methods

Dr. Christiane Stephan-Scherb Kathrin Nützmann Dr. Christian Rockenhäuser

E05: Atomistic origin of ductility
E05.1: Session 1
Session starts at 14:30 Lecture
B2 alloys classified according to splitting of superlattice dislocations

Dr. Vaclav Paidar

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.2: Bio-Interfaces and Antimicrobial Biomaterials II
Session starts at 14:30 Lecture
Controlling cell surface interaction for the study of cancer.

Dr. Graham Hickman Prof. Carole Perry Prof. Graham Pockley Dr. David Boocock Prof. Robert Rees Matthew Nicklin

F06: Biomaterials for Tissue Engineering
F06.1: Session 1
Session starts at 14:30 Lecture
High-strength bioresorbable ?-TCP-(Fe-Ag) nanocomposite scaffolds for bone repair

Dr. Sanjaya Kumar Swain Dr. R. Unger Dr. Irena Gotman Prof. E.Y. Gutmanas

15:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.2: Electrode Materials 2
Session starts at 14:30 Lecture
On the effect of microstructure and current load sequence on the electrochemical behaviour of NCM-based cathodes for Lithium-ion batteries

Matthias Kleinbach Prof. Dr. Volker Knoblauch Denny Schmidt

A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Lecture
Study of electrocatalysts deposition onto TiO2 protective coatings in photoelectrochemical systems

Dr. Nina M. Carretero Dr. Teresa Andreu

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.2: Electrochemical properties at interfaces and catalysts: from multiscale modelling to applications
Session starts at 14:30 Lecture
Power to liquid from simulation

Dr. Michael Walter Thomas Reichenbach Dr. Krishnakanta Mondal Dr. Daniel Himmel Dr. Albert Bruix Prof. Bjork Hammer Prof. Ingo Krossing Prof. Michael Moseler

B01: Very High Cycle Fatigue
B01.2: VHCF II (Ductile Steels)
Session starts at 14:30 Lecture
Slip Band Formation and Crack Initiation during Very High Cycle Fatigue of Duplex Stainless Steel – Part 3: Diffraction and Phase Contrast Tomography

Dr. Wolfgang Ludwig Dr. Benjamin Doenges Dr. Nicola Vigano Dr. Melanie Syha Dr. Anne Huesecken Prof. Dr. Ulrich Krupp

B10: Surface Engineering and Functionalisation
B10.1: Session 1:B10
Session starts at 14:30 Lecture
Improving the tribological performance of WC-Co hard metal surfaces by Laser Surface Texturing

Shiqi Fang Dr. Carsten Gachot Dr. Andreas Rosenkranz Sven Klein Prof. Dr. Dirk Bähre Prof. Dr. Luis Llanes Prof. Dr. Frank Mücklich

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.2: Session 2
Session starts at 14:30 Lecture
Microstructure and Mechanical Properties of Low, Medium and High Si Press Hardening Steels subjected to Q&P

Bernd Linke Thomas Gerber Dr. Ansgar Hatscher Dr. Ilaria Salvatori Iñigo Aranguren Dr. Maribel Arribas

B13: Tribology across length-scales: experiments and simulations
B13.2: Session 2: from Micro to Meso
Session starts at 14:30 Lecture
Small scale tribology and microstructure evolution in Pearlite

Caroline Fink

C01: Protective Coatings and Functional Thin Films
C01.2: Multifunctional Coatings, Thin Films and Surfaces for Engineering Applications
Session starts at 14:30 Lecture
Highly doped zinc oxide films produced by advanced thermal processing in the millisecond range

Dr. Lars Rebohle Martin Braun Dr. Slawomir Prucnal Dr. Wolfgang Skorupa Prof. Elzbieta Guziewicz Dr. Dmytro Snigurenko

C03: Materials for Additive Manufacturing Technologies
C03.2: Characterization of AM materials
Session starts at 14:30 Lecture
Modification of metals for additive manufacturing using RF-plasma

Raphael Addinall Dr. Christopher Hubrich Ivica Kolaric

D04: Small scale and in situ mechanical testing
D04.2: Micromechanical Testing - Nanoindentation I
Session starts at 14:30 Lecture
Nanoindentation and microcompression of Cu-based metallic multilayers

Thomas Kreuter Xi Li Prof. Guang-Ping Zhang Dr. Ruth Schwaiger

D07: High-resolution multiscale characterization
D07.2: Session 2 - Applications
Session starts at 14:30 Lecture
An experimental and microstructural investigation of biaxial Bauschinger effects in IF steel DC06 using in-situ neutron diffraction

Dr.-Ing. Markus Härtel Dr. Tobias Panzner Dr. Enrico Bruder Dr. Stefan Schmaltz Dr. Steven van Petegm Prof. Dr. Kai Willner Prof. Dr. Karsten Durst Prof. Dr. Helena van Swygenhoven Prof. Dr. Martin F.-X. Wagner

E05: Atomistic origin of ductility
E05.1: Session 1
Session starts at 14:30 Highlight Lecture
Shear mechanisms at interfaces in lamellar TiAl alloys from atomistic simulations

Dr. Rebecca Janisch Dr. Mansour Kanani Prof. Dr. Alexander Hartmaier

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.2: Bio-Interfaces and Antimicrobial Biomaterials II
Session starts at 14:30 Lecture
Plasma Electrolytic Oxidation treatment of magnesium surfaces: a study in biocompatibility.

M.Sc. Dario Porchetta Alexander Kopp Ole Jung Christoph Ptock Lisa Lauts Dr. Philip Hartjen

F06: Biomaterials for Tissue Engineering
F06.1: Session 1
Session starts at 14:30 Lecture
Anisotropic mechanical behavior of rod-macroporous biocompatible hydrogels: physicochemical and mechanical characterization.

Prof. Dr. Cesar Barbero Dr. Rebeca Rivero Dr. Fabrisio Alustiza Dr. Nancy Rodríguez Prof. Dr. Pablo Bosch Prof. Dr. Maria Cristina Miras Dr. Claudia Rivarola

15:45
A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Oral Poster
Pulsed Laser Deposition of High Performance Single and Multilayered Photoanodes for Water Splitting

Ph.D. Sebastian Murcia Dr. Teresa Andreu Dr. Cristian Fàbrega Dr. María Dolores Hernández-Alonso Dr. Germán Penelas Prof. Dr. Juan Ramón Morante

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.2: Electrochemical properties at interfaces and catalysts: from multiscale modelling to applications
Session starts at 14:30 Lecture
Coherent X-ray Diffraction from Nanodots of Catalytically Active Materials

Dr.-Ing. Thomas F. Keller Dr. Roman Shayduk Dr. Vedran Vonk Dr. Arti Dangwal Pandey Claudia Neisser Dr. Alexey Zozulya Dr. Michael Sprung Dr. Irene Fernandez-Cuesta Prof. Andreas Stierle

B01: Very High Cycle Fatigue
B01.2: VHCF II (Ductile Steels)
Session starts at 14:30 Lecture
Slip Band Formation and Crack Initiation during Very High Cycle Fatigue of Duplex Stainless Steel – Part 4: Fatigue Life Assessment

Prof. Dr. Hans-Jürgen Christ Benjamin Dönges Prof. Dr. Claus-Peter Fritzen

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.2: Session 2
Session starts at 14:30 Lecture
Synergistic effects of nanoscale precipitations in dual phases and retained austenite by Mn partition on mechanical properties in Mn-TRIP steels

Ph.D. Yu Li Prof. Xuejun Jin Dr. Wei Li

B13: Tribology across length-scales: experiments and simulations
B13.2: Session 2: from Micro to Meso
Session starts at 14:30 Lecture
Microstructure evolution in surface textured materials under reciprocating tribological loading

Sarah Becker Dr. Christian Greiner

C01: Protective Coatings and Functional Thin Films
C01.2: Multifunctional Coatings, Thin Films and Surfaces for Engineering Applications
Session starts at 14:30 Lecture
Punctual cladding of very thin nickel-based superalloy sheets by fiber laser

Tobias Gabriel Dr. Florian Scherm Prof. Dr. Uwe Glatzel

C03: Materials for Additive Manufacturing Technologies
C03.2: Characterization of AM materials
Session starts at 14:30 Lecture
Process-Induced Material Characteristics and its Effect on Fatigue Reliability of Selective Laser Melted Al- and Ti-Alloys

M.Sc. Jochen Tenkamp Shafaqat Siddique Muhammad Imran Prof. Dr. Frank Walther Eric Wycisk Prof. Dr. Claus Emmelmann

D04: Small scale and in situ mechanical testing
D04.2: Micromechanical Testing - Nanoindentation I
Session starts at 14:30 Lecture
Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

Dr. Verena Maier-Kiener Benjamin Schuh Dr. Anton Hohenwarter

D07: High-resolution multiscale characterization
D07.2: Session 2 - Applications
Session starts at 14:30 Lecture
Substrate rotation-induced chemical modulation in Ti-Al-O-N coatings synthesized by cathodic arc in an industrial deposition plant

Marcus Hans Dr. Moritz to Baben Dr. Yen-Ting Chen Dr. Konda G. Pradeep Damian M. Holzapfel Prof. Daniel Primetzhofer Dr. Denis Kurapov Dr. Jürgen Ramm Dr. Mirjam Arndt Dr. Helmut Rudigier Prof. Jochen M. Schneider

E05: Atomistic origin of ductility
E05.1: Session 1
Session starts at 14:30 Lecture
Narrow dislocation dipoles in deformed intermetallic gamma-TiAl

Dr. Hao Wang Prof. Dongsheng Xu Prof. David Rodney Prof. Rui Yang

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.2: Bio-Interfaces and Antimicrobial Biomaterials II
Session starts at 14:30 Lecture
Material Characterization and In Vitro Cell Studies on Keratin Coatings for Titanium Prosthesis

Alexis Trent

F06: Biomaterials for Tissue Engineering
F06.1: Session 1
Session starts at 14:30 Lecture
Enhanced cell affinity of PHBV nanofiber mats with plasma treatment and silk impregnation

Irem Unalan Oylum Colpankan Dr. Aylin Ziylan Cansu Gorgun Dr. Aylin Sendemir Urkmez

15:48
A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Oral Poster
Fabrication of BaTaO2N Crystal Layers on Ta Substrate by a Flux Coating Method

Dipl.-Ing. Yuki Hara Dr. Mirabbos Hojamberdiev Dr. Hajime Wagata Prof. Katsuya Teshima

15:51
A03: Materials for Energy Engineering
A03.2: Thermoelectrics and photocatalysis
Session starts at 14:30 Oral Poster
Combined atom probe tomography and electron backscatter diffraction experiments of Ag16.7Sb30Te53.3 bulk thermoelectric material

Ph.D. Lamya Abdellaoui Prof. Dr. Christina Scheu Dr. Oana Cojocaru-Mirédin Prof. Dr. Dierk Raabe Prof. Yaron Amouyal

16:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.3: Advanced Analysis
Session starts at 16:30 Lecture
Operando SQUID magnetometry as tool for studying charging and discharging processes in Lithium ion battery cathodes

Prof. Dr. Roland Würschum Gregor Klinser Dr. Stefan Topolovec Dr. Harald Kren Dr. Stefan Koller Prof. Dr. Heinz Krenn

A03: Materials for Energy Engineering
A03.3: Batteries and Nuclear
Session starts at 16:30 Highlight Lecture
Design and additive manufacture of complex geometries for heat transfer management in energy engineering

Prof. Dr. Andres Diaz Lantada Adrian De Blas Romero Prof. Dr. Enrique Chacon Tanarro

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Highlight Lecture
Non-platinum electrocatalysts for anion exchange membrane fuel cells (AEM-FCs)

Prof. Dr. Dario Dekel

B01: Very High Cycle Fatigue
B01.3: VHCF III (High-Strength Steels)
Session starts at 16:30 Lecture
Threshold values for VHCF crack initiation in high-strength steels

Daniel Spriestersbach Alexander Brodyanski Jörg Lösch Michael Kopnarski Eberhard Kerscher

B10: Surface Engineering and Functionalisation
B10.2: Session 2: B10
Session starts at 16:30 Lecture
Picosecond Laser Interference Patterning – The Fabrication of Sub-Micron Structures on Metals

Matthias Bieda Dr. Mathias Siebold Prof. Dr. Andrés F. Lasagni

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.3: Session 3
Session starts at 16:30 Highlight Lecture
Development of Highly Formable Giga Strength Steels by Q&P Process at POSCO

Dr. Jai-Hyun Kwak Dr. Hang Sik Cho

B13: Tribology across length-scales: experiments and simulations
B13.3: Session 3: from Meso to Macro
Session starts at 16:30 Lecture
Influence of manufacturing- and application-induced boundary layers on the running behavior of rolling contacts

Rene Greschert Prof. Dr. Christian Brecher Dr. Christoph Löpenhaus

C01: Protective Coatings and Functional Thin Films
C01.3: Protective Coatings, Thin Films and Surfaces
Session starts at 16:30 Lecture
A Protective Coating on Copper Alloys for High Heat-Flux Applications in Rocket Engines

Dipl.-Ing. Torben Fiedler Dr. Martin Bäker Prof. Dr. Joachim Rösler

C03: Materials for Additive Manufacturing Technologies
C03.3: Advanced materials for AM
Session starts at 16:30 Lecture
Optimized Tricalcium Phosphate Slurry for Stereolithographic Additive Manufacturing

DI Markus Pfaffinger Prof. Dr. Jürgen Stampfl

D04: Small scale and in situ mechanical testing
D04.3: Micromechanical Testing - Nanoindentation II
Session starts at 16:30 Lecture
A Simple Algorithm for the Extraction of Plasticity Parameters from Indentation Data via Finite Element Modelling

Dr. James Dean Prof. Bill Clyne

D07: High-resolution multiscale characterization
D07.3: Session 3 - Applications II
Session starts at 16:30 Lecture
Towards understanding the eutectic modification of Al-Si casting alloys

Dipl.-Ing. Jenifer Barrirero Michael Engstler Dr. Naureen Ghafoor Prof. Dr. Magnus Odén Prof. Dr. Frank Mücklich

E05: Atomistic origin of ductility
E05.2: Session 2
Session starts at 16:30 Lecture
Atomistic simulations of hydrogen embrittlement: theoretical tensile strength of Ni sigma5 (210) and Fe sigma5 (310) tilt grain boundaries.

Dr. Petr Sestak Dr. Petr Rehak Dr. Miroslav Cerny Dr. Jyanying He Prof. Zhiliang Zhang Prof. Jaroslav Pokluda

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.3: Bio-Interfaces and Antimicrobial Biomaterials III
Session starts at 16:30 Keynote Lecture
Design and applications of functional peptide nanofibers

Dr. Gang Wei Prof. Dr. Zhiqiang Su

F06: Biomaterials for Tissue Engineering
F06.2: Bio-based Materials and Applications
Session starts at 16:30 Lecture
New Polysaccharide Bioplastics Prepared from Red Algae

Susana Guzman-Puyol Dr. José Alejandro Heredia-Guerrero Dr. Luca Ceseracciu Prof. Dr. Roberto Cingolani Dr. Ilker Bayer Dr. Athanassia Athanassiou

16:45
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.3: Advanced Analysis
Session starts at 16:30 Lecture
XPS- analysis of composite cathodes in 18650 Li-ion batteries as a function of spatial origin and cycling protocol

Dipl.-Ing. Natalia Schulz Dr. Lucangelo Dimesso Prof. Dr. Wolfram Jaegermann Dr. René Hausbrand

A03: Materials for Energy Engineering
A03.3: Batteries and Nuclear
Session starts at 16:30 Lecture
Using FeCrAl Cladding for High Performance Fuel in Light Power Reactors

Raul Rebak

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Lecture
Defects Triggered Activity of TiO2 for Hydrogen Evolution

Prof. Dr. Peter Schaaf Dr. Yong Yan Dr. Dong Wang Prof. Dr. Ge Chen Prof. Dr. R. S. Sun H. M. Wang Dr. A. Konkin

B01: Very High Cycle Fatigue
B01.3: VHCF III (High-Strength Steels)
Session starts at 16:30 Lecture
Evaluation of multiple-flaw failure of bearing steel 52100 in the VHCF regime and description of the single-flaw behavior

Dr. Klaus Burkart Prof. Dr. Brigitte Clausen Prof. Dr. Hans-Werner Zoch

B10: Surface Engineering and Functionalisation
B10.2: Session 2: B10
Session starts at 16:30 Lecture
Electrophoretically deposited carbon nanoparticles on laser-structured metallic surfaces as friction-reducing protective films

Dr.-Ing. Sebastian Suarez Vallejo Leander Reinert Federico Lasserre Timothy MacLucas Dr. Carsten Gachot Prof. Dr. Frank Mücklich

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.3: Session 3
Session starts at 16:30 Lecture
A Perspective on Processing and Development of Tough Ductile High Strength Steels through TMR-DQP Process

Dr. Mahesh Somani Prof. David Porter Prof. Jukka Kömi Prof. Devesh Misra Prof. Pentti Karjalainen

B13: Tribology across length-scales: experiments and simulations
B13.3: Session 3: from Meso to Macro
Session starts at 16:30 Lecture
Influence of tribological boundary layers on wear protection and friction in rolling bearings

Gero Burghardt Prof. Dr. Georg Jacobs Andreas Stratmann

C01: Protective Coatings and Functional Thin Films
C01.3: Protective Coatings, Thin Films and Surfaces
Session starts at 16:30 Lecture
Gas flow sputtered thermal barrier coatings

Nils Rösemann Dr. Kai Ortner Dr. Martin Bäker Prof. Dr. Günter Bräuer Prof. Dr. Joachim Rösler

C03: Materials for Additive Manufacturing Technologies
C03.3: Advanced materials for AM
Session starts at 16:30 Lecture
Design strategies of functionally graded materials: towards reliable and eco-sustainable additive manufacture

Dipl.-Ing. Adrian de Blas Prof. Dr. Andres Diaz Lantada

D04: Small scale and in situ mechanical testing
D04.3: Micromechanical Testing - Nanoindentation II
Session starts at 16:30 Highlight Lecture
In-situ, transient and high dynamic testing at the micron scale: studying time dependent plasticity and high cycle fatigue of nanocrystalline and single crystalline metals

Dr. Gaurav Mohanty Dr. Jakob Schwiedrzik Serge Grop Juri Wehrs Dr. Jean-Marc Breguet Dr. Johann Michler

D07: High-resolution multiscale characterization
D07.3: Session 3 - Applications II
Session starts at 16:30 Lecture
Early stages of cluster forming in Al-Mg-Si alloys

Dr. Julia Wagner Alexander Kahrimanidis Dr. Stephan Gerstl

E05: Atomistic origin of ductility
E05.2: Session 2
Session starts at 16:30 Lecture
Atomistic simulations of hydrogen behaviour at structural defects in high-strength steels

Dr. Eunan J. McEniry Dr. Tilmann Hickel

F06: Biomaterials for Tissue Engineering
F06.2: Bio-based Materials and Applications
Session starts at 16:30 Lecture
Wool keratins, a protein platform for multifunctional materials

Dr. Giovanni Perotto Dr. Tommaso Avellini Anatolii Polovitsyn Dr. Iwan Moreels Dr. Teresa Pellegrini Dr. Athanassia Athanassiou

17:00
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.3: Advanced Analysis
Session starts at 16:30 Lecture
In-situ Thin-Film Calorimetry on Thin-Film All-Solid-State-Electrochemical-Cells

Hendrik Wulfmeier Alexander Omelcenko Daniel Albrecht Susann Nowak Leila Raafat Prof. Dr. Guido Schmitz Prof. Dr. Holger Fritze

A03: Materials for Energy Engineering
A03.3: Batteries and Nuclear
Session starts at 16:30 Lecture
Self-passivating, tungsten-based smart alloys for extreme environments

Felix Klein Tobias Wegener Dr. Andrey Litnovsky Dr. Marcin Rasinski Dr. Hongchu Du Prof. Dr. Joachim Mayer Prof. Dr. Christian Linsmeier

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Lecture
Successful application of a commercial cationic surfactant mixture (benzalkonium chloride) as porosity stabilizer in porous carbons fabrication

Prof. Dr. Cesar Barbero Luciano Tamborini Dr. Miriam Casco Paula Militello Dr. Joaquín SILVESTRE-ALBERO Dr. Diego Acevedo

B01: Very High Cycle Fatigue
B01.3: VHCF III (High-Strength Steels)
Session starts at 16:30 Highlight Lecture
Mean stress sensitivity and crack initiation mechanisms of spring steel for torsional and axial VHCF loading

Prof. Dr. Herwig Mayer Reinhard Schuller Ulrike Karr Dr. Michael Fitzka Daniel Irrasch Dr. Malte Hahn Dr. Manfred Bacher Höchst

B10: Surface Engineering and Functionalisation
B10.2: Session 2: B10
Session starts at 16:30 Lecture
Influence of surface texturing on the wear behaviour of rolling bearings

Dipl.-Ing. Andreas Stratmann Prof. Dr. Georg Jacobs Chia-Jui Hsu Gero Burghardt

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.3: Session 3
Session starts at 16:30 Lecture
The Effect of Martensite/Bainite Microstructures obtained Above and Below Ms on the Mechanical Properties in a low-C Steel

Ph.D. Alfonso Navarro-López Dr. Javier Hidalgo Garcia Prof. Dr. Jilt Sietsma Dr. Maria J. Santofimia

B13: Tribology across length-scales: experiments and simulations
B13.3: Session 3: from Meso to Macro
Session starts at 16:30 Lecture
The Influence of Silicon grain size on the wear behavior of a hypoeutectic Aluminum-Silicon alloy

Dr. Dominic Linsler

C01: Protective Coatings and Functional Thin Films
C01.3: Protective Coatings, Thin Films and Surfaces
Session starts at 16:30 Highlight Lecture
Synthesis of compositionally graded protective coatings for short carbon fiber reinforced Si3N4-Ceramic Matrix Composites

Johanna Zimmermann Prof. Dr. Monika Willert-Porada

C03: Materials for Additive Manufacturing Technologies
C03.3: Advanced materials for AM
Session starts at 16:30 Lecture
Precipitation Reaction in a Maraging Steel during Laser Additive Manufacturing triggered by Intrinsic Heat Treatment

Dipl.-Ing. Philipp Kürnsteiner Markus Benjamin Wilms Dr. Andreas Weisheit Dr. Eric Aimé Jägle Prof. Dr. Dierk Raabe

D04: Small scale and in situ mechanical testing
D04.3: Micromechanical Testing - Nanoindentation II
Session starts at 16:30 Lecture
A Simple Method for the Extraction of Steady-State Creep Parameters from Indentation Data via Finite Element Modelling

James Campbell Dr. James Dean Prof. Bill Clyne

D07: High-resolution multiscale characterization
D07.3: Session 3 - Applications II
Session starts at 16:30 Lecture
Correlative study of grain boundary segregation in sintered molybdenum alloys

Dominik Lutz V Maier-Kiener K. Babinsky H. Clemens A Lorich K. Huber

E05: Atomistic origin of ductility
E05.2: Session 2
Session starts at 16:30 Lecture
How co-segregation of oxygen and carbon effects grain boundary cohesion in Mo

Daniel Scheiber Prof. Reinhard Pippan Dr. Lorenz Romaner Prof. Peter Puschnig

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.3: Bio-Interfaces and Antimicrobial Biomaterials III
Session starts at 16:30 Lecture
Autodeposition of Eumelanin Nanoparticles via Enzymatic in situ Synthesis

Dr. Oliver Strube

F06: Biomaterials for Tissue Engineering
F06.2: Bio-based Materials and Applications
Session starts at 16:30 Lecture
Photochromic composite silk fibroin nanofibers for acid and ion sensing applications

Maria Erminia Genovese Dr. Despina Fragouli Dr. Athanassia Athanassiou

17:15
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.3: Advanced Analysis
Session starts at 16:30 Lecture
Improved Thin-Film Calorimeter for High-Temperature Investigations of Thin Films

Alexander Omelcenko Hendrik Wulfmeier Sebastian Schröder Prof. Dr. Holger Fritze

A03: Materials for Energy Engineering
A03.3: Batteries and Nuclear
Session starts at 16:30 Lecture
Phase Transformations upon Doping in Tungsten Trioxide

Wennie Wang Prof. Dr. Anderson Janotti Prof. Dr. Chris G. Van de Walle

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Lecture
PECVD of CoOxOH2 and CoMOxOH2 (M=Ni, Fe) as Catalysts for the Oxygen Evolution Reaction

Natascha Weidler Jona Schuch Dr. Bernhard Kaiser Prof. Dr. Wolfram Jaegermann

B01: Very High Cycle Fatigue
B01.3: VHCF III (High-Strength Steels)
Session starts at 16:30 Lecture
Influence of Near-Surface Stress Gradients on the Very High Cycle Fatigue Behaviour of 42CrMo4 Steel

Thomas Rohm

B10: Surface Engineering and Functionalisation
B10.2: Session 2: B10
Session starts at 16:30 Lecture
Influences of Laser-Modification on 100Cr6-surfaces - White Etching Zones, Mircostructural Changes and Adhesion Optimization

Dr. Anna Buling Prof. Dr. Ulrich Krupp Prof. Dr. Angela Hamann-Steinmeier

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.3: Session 3
Session starts at 16:30 Lecture
Mechanical properties of Q&P steel by low temperature partitioning

Ph.D. Xianwen Lu Dr. Mingjiang Jin Dr. Wei Li Prof. Dr. Xuejun Jin

B13: Tribology across length-scales: experiments and simulations
B13.3: Session 3: from Meso to Macro
Session starts at 16:30 Lecture
Tribological Performance of SiC and Si3N4 in Isooctane under Reciprocating Motion and the Effects of LST

Paul Schreiber Dr. Johannes Schneider

C01: Protective Coatings and Functional Thin Films
C01.3: Protective Coatings, Thin Films and Surfaces
Session starts at 16:30 Lecture
Development of nanoparticle based coatings for high-strengths steel alloys for hot stamping

Alexander Tenié Dr. Volodymyr Kuznetsov Dr. Wolfram Fürbeth Prof. Dr. Wolfgang Bleck

C03: Materials for Additive Manufacturing Technologies
C03.3: Advanced materials for AM
Session starts at 16:30 Lecture
Toughening of Photopolymers for Lithography-based Additive Manufacturing

Bernhard Steyrer Dr. Christian Gorsche Peter Dorfinger Prof. Dr. Robert Liska Prof. Dr. Jürgen Stampfl

D04: Small scale and in situ mechanical testing
D04.3: Micromechanical Testing - Nanoindentation II
Session starts at 16:30 Lecture
Study of indentation size effect, microstructural refinement and rate sensitivity in Cu-X solid solutions

Hamad ur Rehman Dr. Enrico Bruder Prof. Dr. Karsten Durst

D07: High-resolution multiscale characterization
D07.3: Session 3 - Applications II
Session starts at 16:30 Lecture
Atomistic analysis of reaction kinetics in Ag/Al superlattice structures

Hisham Aboulfadl Dr. Isabella Gallino Prof. Dr. Ralf Busch Prof. Dr. Frank Mücklich

E05: Atomistic origin of ductility
E05.2: Session 2
Session starts at 16:30 Lecture
Atomistic simulations of planar defects in solids: evaluations of present and new methods for computation of strength of grain boundaries

Dr. Petr Sestak Dr. Miroslav Cerny Dr. Petr Rehak Dr. Monika Vsianska Prof. Mojmir Sob

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.3: Bio-Interfaces and Antimicrobial Biomaterials III
Session starts at 16:30 Lecture
Nanostructuring via Enzyme Mediated Autodeposition

Arne Rüdiger Dr. Oliver Strube Prof. Dr. Wolfgang Bremser

F06: Biomaterials for Tissue Engineering
F06.2: Bio-based Materials and Applications
Session starts at 16:30 Lecture
Synthesis and In-Vitro Evaluation of Soft Polymersomes for Efficient Intracellular Drug Delivery

Tsuf Croitoru-Sadger

17:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.3: Advanced Analysis
Session starts at 16:30 Lecture
Determination of heat capacities of cathode materials and calorimetry on coin cells with a DSC-like Battery Calorimeter for Lithium-Ion Batteries

Dr. David Henriques Hans Giel Prof. Dr. Torsten Markus

A03: Materials for Energy Engineering
A03.3: Batteries and Nuclear
Session starts at 16:30 Oral Poster
Optimization of Flexible Silver-Zinc Wire Battery for Integration in Wearable Electronics.

Cheryl Chang Alla Zamarayeva Dr. Abhinav Gaikwad Dr. Igal Deckman Michael Wang Brian Khau Prof. Daniel Steingart Prof. Ana Claudia Arias

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Lecture
Uranium oxide materials for solar hydrogen production

Jennifer Leduc Prof. Dr. Sanjay Mathur Prof. Dr. Yakup Gönüllü Dr. Thomas Fischer

B01: Very High Cycle Fatigue
B01.3: VHCF III (High-Strength Steels)
Session starts at 16:30 Lecture
Influence of nitride layer on the fatigue behavior and crack initiation of 42CrMo4 cast steel in the VHCF regime

Dr.-Ing. Anja Weidner Tim Lippmann Prof. Dr. Horst Biermann

B10: Surface Engineering and Functionalisation
B10.2: Session 2: B10
Session starts at 16:30 Lecture
Novel filler material for repair of high-performance steel tools by laser deposition welding

Josephine Zeisig Alexander Fröhlich Julia Hufenbach Nicola Schädlich Dubravko Badun Swen Freeth Verena Kräusel Jürgen Eckert Uta Kühn

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.3: Session 3
Session starts at 16:30 Lecture
Dilatometer analysis of one-step quenching and partitioning in two medium carbon steels.

David Martin Oskar Karlsson Johan Eliasson Magnus Andersson

B13: Tribology across length-scales: experiments and simulations
B13.3: Session 3: from Meso to Macro
Session starts at 16:30 Lecture
Combined abrasive and corrosive wear of steel, does corrosion exacerbate abrasive wear of steel?

Yueting Liu Prof. Dr. G.C.A.M Janssen

C01: Protective Coatings and Functional Thin Films
C01.3: Protective Coatings, Thin Films and Surfaces
Session starts at 16:30 Lecture
Mechanical Assessment of Hypo- And Hyper- Eutectic Chromium Carbide Hard Facing Steel Grades

Prof. Dr. Bakr Rabeeh Prof. Dr. Yasser Fouad Zeyad S. Abd El Azim

C03: Materials for Additive Manufacturing Technologies
C03.3: Advanced materials for AM
Session starts at 16:30 Lecture
Fatigue behavior of additively manufactured Ti 6Al 4V in the very high cycle fatigue regime

Johannes Günther Stefan Leuders Dr. Dominik Krewerth Tim Lippmann Dr. Anja Weidner Prof. Dr. Horst Biermann Prof. Dr. Thomas Niendorf

D04: Small scale and in situ mechanical testing
D04.3: Micromechanical Testing - Nanoindentation II
Session starts at 16:30 Lecture
Towards Operational Temperatures: Nanoindentation of CMSX-4 and an Amdry-386 Bondcoat to 1000?C

Dr. James Gibson Sebastian Schröders Christoffer Zehnder Prof. Dr. Sandra Korte-Kerzel

D07: High-resolution multiscale characterization
D07.3: Session 3 - Applications II
Session starts at 16:30 Lecture
Characterization and microscopic precursors of failure in a polymer network

Dr.-Ing. Yassine Nagazi

E05: Atomistic origin of ductility
E05.2: Session 2
Session starts at 16:30 Lecture
Multiscale approach for predicting mechanical properties of interfaces

Dr. David Holec Dr. Martin Friak Monika Vsianska Dr. Darius Tytko Prof. Dr. Dierk Raabe Prof. Dr. Mojmir Sob Prof. Dr. Joerg Neugebauer

F01: Bio-Interfaces and Antimicrobial Biomaterials
F01.3: Bio-Interfaces and Antimicrobial Biomaterials III
Session starts at 16:30 Highlight Lecture
Insights into the use of specific metal binding of self-assembling S-layer proteins

Dr. Manja Vogel Björn Drobot Dr. Tobias Günther Falk Lehmann Dr. Ulrike Weinert Dr. Katrin Pollmann Dr. Johannes Raff

F06: Biomaterials for Tissue Engineering
F06.2: Bio-based Materials and Applications
Session starts at 16:30 Lecture
A New Approach for Molecular Self-assembly and Drug Delivery

Rawan Omar

17:33
A03: Materials for Energy Engineering
A03.3: Batteries and Nuclear
Session starts at 16:30 Oral Poster
Reimagined battery geometries for increased mechanical robustness in flexible Ag-Zn battery systems

Michael Liu Alla Zamarayeva Michael Wang Igal Deckman Greg Davies Claire Lochner Daniel Steingart Ana Arias

17:45
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.3: Advanced Analysis
Session starts at 16:30 Lecture
Heat capacity measurement of LiSi in a temperature range 2 - 730 K

Franziska Biedermann Dr. Raphaël Janot Dr. Regina Hüttl Dr. Jürgen Seidel Prof. Dr. Roman Gumeniuk Prof. Dr. Florian Mertens

A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Oral Poster
The double layer of Pt-water interfaces from first principles molecular dynamics

Dr.-Ing. Ashwinee Kumar Prof. Stefano Sanvito Dr. Clotilde S. Cucinotta

B01: Very High Cycle Fatigue
B01.3: VHCF III (High-Strength Steels)
Session starts at 16:30 Lecture
Influence of notches and different R-values on the VHCF-behavior of a martensitic steel for steam turbines

Fabian Ritz Prof. Dr. Tilmann Beck

B10: Surface Engineering and Functionalisation
B10.2: Session 2: B10
Session starts at 16:30 Lecture
Surface biofunctionalization of rapid prototyped microsystems for cell culture applications

Prof. Dr. Andres Diaz Lantada Ely Dannier Valbuena Niño Dr. Ivan Fernández Martínez Prof. Dr. Josefa Predestinación García Ruíz

B11: Third Generation Advanced High Strength Steels by Quenching and Partitioning
B11.3: Session 3
Session starts at 16:30 Lecture
Effect of the prior austenite grain size on the microstructure of a Quenching & Partitioning steel

Dr.-Ing. Carola Alonso de Celada Casero Prof. Dr. Jilt Sietsma Dr. Maria J. Santofimia

B13: Tribology across length-scales: experiments and simulations
B13.3: Session 3: from Meso to Macro
Session starts at 16:30 Lecture
Stability and failure of frictional interfaces

Marc Weikamp Prof. Dr. Robert Spatschek Dr. Yohai Bar-Sinai Dr. Eran Bouchbinder Dr. Efim Brener

C01: Protective Coatings and Functional Thin Films
C01.3: Protective Coatings, Thin Films and Surfaces
Session starts at 16:30 Lecture
Application of the GEB model to predict bainite stasis, the bay formation and aspects of the bainite morphology.

Prof. Dr. Sybrand van der Zwaag H. Chen

C03: Materials for Additive Manufacturing Technologies
C03.3: Advanced materials for AM
Session starts at 16:30 Lecture
Development of a stochastic approach for fatigue life prediction of AlSi12 alloy processed by selective laser melting

Mustafa Awd Shafaqat Siddique Muhammad Imran Prof. Dr. Frank Walther

D04: Small scale and in situ mechanical testing
D04.3: Micromechanical Testing - Nanoindentation II
Session starts at 16:30 Lecture
Dispersion sources in nanoindentation test data used to determinate the constitutive law of metallic materials.

Dipl.-Ing. Sanchez Camargo Cesar Moises Dr. Anis HOR Prof. Dr. Catherine MABRU Dr. Rémy Chieragatti

D07: High-resolution multiscale characterization
D07.3: Session 3 - Applications II
Session starts at 16:30 Lecture
In situ analysis of lattice deformation in individual grains during stress induced tensile deformations in a polycrystalline Cu sample using ultra hard x-rays Laue diffraction

Dr. Ali Abboud Prof. Dr. Ullrich Pietsch Mohammad Shokr Amir Tosson Prof. Dr. Jozef Keckes Prof. Dr. Luthar Strüder Dr. Manuela Klaus Prof. Dr. Christopher Genzel Ariunbold Uuganjargal

E05: Atomistic origin of ductility
E05.2: Session 2
Session starts at 16:30 Lecture
Interface-induced toughening of nitride superlattices

Dr. David Holec Dr. Petr Rehak

F06: Biomaterials for Tissue Engineering
F06.2: Bio-based Materials and Applications
Session starts at 16:30 Lecture
Optimal doses of bortezomib - a new local treatment strategy against multiple myeloma

Dr. Seemun Ray Dr. Ulrich Thormann Dr. Thaqif El Khassawna Dr. Ursula Sommer Prof. Dr. Michael Gelinsky Prof. Dr. Thomas Hanke Dr. Anja Henss Dr. Marcus Rohnke Prof. Dr. Christian Heiss Prof. Dr. Volker Alt

17:48
A06: Catalytic Materials and Processes for Energy Storage and Conversion
A06.3: Novel catalysts for energy conversion
Session starts at 16:30 Oral Poster
Hydrogen sorption kinetics of titanium hydride thin films

Lukas Michalek Efi Hadjixenophontos Prof. Dr. Guido Schmitz

Wednesday (28.09.2016)

09:15
A01: High-Temperature Functional Materials
A01.1: Sensors and Measurement Principles
Session starts at 09:15 Keynote Lecture
Development of Long Wavelength Infrared Radiation Thermometry for Measurements in Gas Turbines

Prof. Dr. Jürgen Hartmann Dr. Jochen Manara M. Zipf T. Stark M. Arduini A. Tutschke A. Hallam J. Hanspal M. Langley D. Hodge

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.4: New Materials Concepts
Session starts at 09:15 Lecture
First-Principles Calculations on Structure and Properties of Amorphous LiPON

Dr. Sabrina Sicolo Prof. Dr. Karsten Albe

A10: Ferroelectric and Multiferroic Materials
A10.1: Ferroelectric and Multiferroic Materials I
Session starts at 09:15 Lecture
Effect of criticality on the piezoelectric and electrocaloric properties of relaxor ferroelectrics

Florian Weyland Dr. Matias Acosta Dr. Nikola Novak

B01: Very High Cycle Fatigue
B01.4: VHCF IV (Specific Aspects)
Session starts at 09:15 Lecture
Fracture-mechanical analyses of variable amplitude loadings in the very high cycle fatigue regime

Carsten Stäcker Prof. Dr. Manuela Sander

B06: Advanced Steels for Structural Applications
B06.1: High alloy TRIP/TWIP steels
Session starts at 09:15 Lecture
Multiscale micromechanical modelling for advanced high strength steels including both the TRIP and TWIP effect

Dr. Franz Roters Dr. Su Leen Wong

B10: Surface Engineering and Functionalisation
B10.3: Session 3: B10
Session starts at 09:15 Lecture
Engineering Surfaces of Metallic Components and Structures by Means of Shot Peening, Deep Rolling and High Frequency Impact Treatment for better Fatigue Performance

Dr. Majid Farajian Jan Föhrenbach Dr. Michael Luke

D04: Small scale and in situ mechanical testing
D04.4: In-Situ Mechanical Testing in the TEM
Session starts at 09:15 Highlight Lecture
Mechanical behavior of fivefold twinned silver nanowires and nanowire films by means of in situ tensile tests in TEM

Nadine Schrenker Dr. Mirza Mackovic Manuela Göbelt Prof. Dr. Silke Christiansen Prof. Dr. Erdmann Spiecker

D06: Analytical Methods for Thin Film Investigations
D06.1: Session 1: New analytical techniques for thin film characterization
Session starts at 09:15 Keynote Lecture
Combinatorial Substrate Epitaxy of Functional Oxide Films

Prof. Dr. Wilfrid Prellier

E08: Microstructural Evolution – recent advances in experiments and modelling
E08.1: Phase transformation and microstructural design
Session starts at 09:15 Keynote Lecture
Shake, rattle and roll! Direct observation of grain rotations during coarsening of a semisolid Al-Cu alloy

Prof. Carl E. Krill Jules M. Dake Dr. Jette Oddershede Dr. Søren Schmidt Dr. Henning O. Sørensen Dr. Thomas Werz J. Cole Shatto

F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.1: Session 1
Session starts at 09:15 Highlight Lecture
Porous iron-silver nanocomposites as biodegradable load-bearing scaffolds in medical applications

Prof. Elazar Gutmanas Aliya Sharipova Prof. Sergey Psakhie Dr. Sanjaya Swain Dr. Ronald Unger Prof. Irena Gotman Prof. Irena Gotman Dr. David Starosvetsky

F07: Polymeric Materials
F07.1: Composites
Session starts at 09:15 Lecture
Low-formaldehyde long woodchip plastic composites – a novel biobased material for high preformance applications

M. Sc Robert Hartmann Stefan Caba Prof. Dr. Michael Koch

09:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.4: New Materials Concepts
Session starts at 09:15 Lecture
Towards an understanding of the interface formation between LiPON and LAGTP/LATP electrolytes for all solid state batteries

Conrad Guhl Dr. René Hausbrand Prof. Dr. Wolfram Jaegermann

A10: Ferroelectric and Multiferroic Materials
A10.1: Ferroelectric and Multiferroic Materials I
Session starts at 09:15 Lecture
Enhancement of electrocaloric cooling by electric field reversal: simulation and experiment

Yangbin Ma Dr. Nikola Novak Dr. Jurij Koruza Prof. Tongqing Yang Prof. Dr. Karsten Albe Prof. Bai-Xiang Xu

B01: Very High Cycle Fatigue
B01.4: VHCF IV (Specific Aspects)
Session starts at 09:15 Lecture
Influence of ceramic short fibers and particles on the very high-cycle fatigue behavior of Al-matrix-composites

Dr.-Ing. Anja Weidner Alexandra Illgen Prof. Dr. Horst Biermann

B06: Advanced Steels for Structural Applications
B06.1: High alloy TRIP/TWIP steels
Session starts at 09:15 Lecture
In-situ study of the orientation dependent microstructure defect density and phase transformation in metastable austenitic TRIP/TWIP steel under compressive load

Christiane Ullrich Dr. Stefan Martin Dr. Norbert Schell Prof. Dr. Heinz-Günter Brokmeier Prof. Dr. David Rafaja

B10: Surface Engineering and Functionalisation
B10.3: Session 3: B10
Session starts at 09:15 Lecture
Nanoscale surface modification of AISI 316L Stainless Steel by Severe Shot Peening

Dipl.-Ing. Sebastian Slawik Dr. Sara Bagherifard Prof. Inés Fernández-Pariente Christoph Pauly Prof. Dr. Frank Mücklich Prof. Mario Guagliano

D04: Small scale and in situ mechanical testing
D04.4: In-Situ Mechanical Testing in the TEM
Session starts at 09:15 Lecture
Atomic-level elastic strain measurement from selected area electron diffraction pattern of amorphous TiAl during in-situ TEM straining

Christian Ebner Rohit Sarkar Prof. Dr. Jagannathan Rajagopalan Prof. Dr. Christian Rentenberger

F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.1: Session 1
Session starts at 09:15 Lecture
Effects of sulphur addition on microstructure and mechanical behavior of Fe-Mn-C TWIP alloys for biomedical application

Dr. Julia Kristin Hufenbach Dr. Horst Wendrock Dr. Lars Giebeler Andrea Voß Dr. Anja Lode Prof. Dr. Michael Gelinsky Dr. Uta Kühn Dr. Annett Gebert

F07: Polymeric Materials
F07.1: Composites
Session starts at 09:15 Lecture
Study of polyethylene composites containing lignocellulosic fillers

Franciszek Pawlak Bartosz Gackowski Robert Pobiedzinski

09:45
A01: High-Temperature Functional Materials
A01.1: Sensors and Measurement Principles
Session starts at 09:15 Lecture
Temperature Stable Indium Oxide Photonic Crystals as new Transducer Material for Optical and Resistive Gas Sensing

Dr. Thorsten Wagner Sabrina Amrehn Dr. Xia Wu

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.4: New Materials Concepts
Session starts at 09:15 Lecture
Influence of structural and crystallographical factors on the Li-ion conductivity of garnet type cubic Li7La3Zr2O12 electrolyte units

Prof. Mamoru Senna Dr. P. Jeevan Kumar Dr. Andre Düvel Dr. C. Vinod Chandran Dr. Katharina Bösebeck Prof. Dr. Paul Heitjans Prof. Naonori Sakamoto Prof. Naoki Wakiya Prof. Hisao Suzuki

A10: Ferroelectric and Multiferroic Materials
A10.1: Ferroelectric and Multiferroic Materials I
Session starts at 09:15 Keynote Lecture
Transfer of lead-free piezoelectric materials into application: status and perspective

Prof. Dr. Jürgen Rödel Dr. Jurij Koruza

B01: Very High Cycle Fatigue
B01.4: VHCF IV (Specific Aspects)
Session starts at 09:15 Lecture
Simulation and analysis of fatigue lifetimes

Markus Baaske

B06: Advanced Steels for Structural Applications
B06.1: High alloy TRIP/TWIP steels
Session starts at 09:15 Lecture
Tailoring the mechanical properties of high-manganese TRIP/TWIP steels by reversion annealing

Frederike Berrenberg Dr. Christian Haase Dr. Luis A. Barrales-Mora Prof. Dr. Dmitri A. Molodov

B10: Surface Engineering and Functionalisation
B10.3: Session 3: B10
Session starts at 09:15 Lecture
Micro- and nanostructured polymer foils prepared by thermal embossing technique

Dr.-Ing. Stefan Schulze Annika Thormann Jessica Klehm Matthias Menzel Veronika Däumlich Prof. Dr. Andreas Heilmann

D04: Small scale and in situ mechanical testing
D04.4: In-Situ Mechanical Testing in the TEM
Session starts at 09:15 Lecture
Gaining insights into friction between atomically flat interfaces using in situ mechanical testing

Peter Schweizer Florian Niekiel Prof. Dr. Erdmann Spiecker

D06: Analytical Methods for Thin Film Investigations
D06.1: Session 1: New analytical techniques for thin film characterization
Session starts at 09:15 Highlight Lecture
Determination of growth quality of thin films by In-situ GISAXS during the deposition process

Dr. Jörg Wiesmann Dr. Jürgen Graf Andreas Stricker Dr. Karol Vegso Martin Hodas Dr. Peter Siffalovic

E08: Microstructural Evolution – recent advances in experiments and modelling
E08.1: Phase transformation and microstructural design
Session starts at 09:15 Lecture
Austenite grain growth investigated by complementary in-situ techniques

Prof. Ernst Gamsjäger Walter Antonio Tichauer Dr. Thomas Garcin Prof. Dr. Matthias Militzer

F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.1: Session 1
Session starts at 09:15 Lecture
High strength Mg alloys for implant applications

Dr. Jelena Horky Dr. Michael Humenberger Dr. Maciej Krystian Dr. Bernhard Mingler

F07: Polymeric Materials
F07.1: Composites
Session starts at 09:15 Lecture
Acetylation and Crystalline Structure of ?-Chitin from Marine Invertebrates

Oluwashina Gbenebor Dr. Samson Adeosun Prof. Ganiyu Lawal san Jun Samuel Olaleye

10:00
A01: High-Temperature Functional Materials
A01.1: Sensors and Measurement Principles
Session starts at 09:15 Lecture
Defect chemistry, electrical and electromechanical properties of CTGS single crystals at high-temperatures

Dr. Yuriy Suhak Dr. Michal Schulz Dr. Andrei Sotnikov Dr. Hagen Schmidt Prof. Dr. Holger Fritze

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.4: New Materials Concepts
Session starts at 09:15 Lecture
Thin-film all solid-state lithium-ion batteries

Susann Nowak Dr. Frank Berkemeier Prof. Dr. Guido Schmitz

B01: Very High Cycle Fatigue
B01.4: VHCF IV (Specific Aspects)
Session starts at 09:15 Lecture
Damage initiation, propagation and final failure of GFRP cross- and angle-ply laminates tested in the very high cycle fatigue range

Prof. Dr. Peter Horst Till Julian Adam

B06: Advanced Steels for Structural Applications
B06.1: High alloy TRIP/TWIP steels
Session starts at 09:15 Lecture
Determination of forming limit curves of TWIP steel with the Line-Fit method

Sebastian Wesselmecking Tobias Ingendahl Dr. Harald Hofmann Thorsten Roesler Maximilian Nagel Klaus Unruh Prof. Dr. Wolfgang Bleck

B10: Surface Engineering and Functionalisation
B10.3: Session 3: B10
Session starts at 09:15 Lecture
Enhanced tribological performance of functionalised surfaces using Machine Hammer Peening

Dr. Manel Rodriguez Ripoll Franz Heindl Dr. Christoph Lechner Dr. Vladimir Totolin Dr. Martin Jech Prof. Dr. Friedrich Bleicher

D04: Small scale and in situ mechanical testing
D04.4: In-Situ Mechanical Testing in the TEM
Session starts at 09:15 Lecture
Micro-mechanical tests of individual spherical BN nanoparticles in situ in TEM column

Konstantin Firestein Alexander Steinman Irina Sukhorukova Dr. Andrey Kovalskii Dr. Andrei Matveev Prof. Dr. Dmitri Golberg Prof. Dr. Dmitry Shtansky

D06: Analytical Methods for Thin Film Investigations
D06.1: Session 1: New analytical techniques for thin film characterization
Session starts at 09:15 Lecture
New analytical development to determine the elasticity constants of thin films using Impulse Excitation Technique

Ph.D. Slim Mohamed Fares Prof. Alhussein Akram Prof. François Manuel

E08: Microstructural Evolution – recent advances in experiments and modelling
E08.1: Phase transformation and microstructural design
Session starts at 09:15 Lecture
Investigating the interactive relationship between dendritic growth kinetics and solutal field evolution by in-situ X-ray monitoring the solidification of an Al-Ge alloy

Maike Becker Dr. Stefan Klein Prof. Florian Kargl

F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.1: Session 1
Session starts at 09:15 Lecture
Solid solution treatment on strength and corrosion of biodegradable Mg-Ag wires

Prof. Dr. Petra Maier Fabian Zimmermann Raimund Peters Dr. Norbert Hort Prof. Dr. Carla Vogt

F07: Polymeric Materials
F07.1: Composites
Session starts at 09:15 Lecture
Challenges of lightweight construction with polymer-metal-hybrid parts

Jan-Michael Geck Prof. Hans-Peter Heim Jan-Michael Geck

10:15
A01: High-Temperature Functional Materials
A01.1: Sensors and Measurement Principles
Session starts at 09:15 Lecture
Three-Dimensional Woven Lattice Material with High Damping at Elevated Temperatures

Dr. Stefan Szyniszewski Ladan Salari Sharif Manuel Pelacci Dr. Seunghyan Ha Sharp Keith Prof. Lorenzo Valdevit Prof. James Guest Prof. Kevin Hemker Tim Weihs

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.4: New Materials Concepts
Session starts at 09:15 Lecture
High-Power Li-Ion battery based on vertically aligned carbon nanotubes

Fabian Pawlitzek Dr. Benjamin Schumm Dr. Holger Althues Prof. Dr. Stefan Kaskel

A10: Ferroelectric and Multiferroic Materials
A10.1: Ferroelectric and Multiferroic Materials I
Session starts at 09:15 Lecture
Visualization of polar nanoregions in bismuth-alkali-based relaxor ferroelectrics revealed by high-resolution PFM and quantification of the relaxation behavior via high-speed PFM

Dr. Christian Dietz

B01: Very High Cycle Fatigue
B01.4: VHCF IV (Specific Aspects)
Session starts at 09:15 Lecture
A resonant testing method for high frequency testing of composites in the VHCF regime

Dipl.-Ing. Paul Lorsch Dr. Peter Wierach Prof. Dr. Michael Sinapius

B06: Advanced Steels for Structural Applications
B06.1: High alloy TRIP/TWIP steels
Session starts at 09:15 Lecture
Ab initio Simulation of Segregation to Planar Defects in High Manganese Steels

Dr. Tilmann Hickel Dr. Ivan Bleskov Dr. Xie Zhang Prof. Jörg Neugebauer

B10: Surface Engineering and Functionalisation
B10.3: Session 3: B10
Session starts at 09:15 Lecture
Mechanical post-treatment of induction-hardened surface layers to optimize fatigue strength of crankshafts

Dr. Martin Leitner Zafer Tuncali Dr. Wei Chen Prof. Dr. Florian Grün

D04: Small scale and in situ mechanical testing
D04.4: In-Situ Mechanical Testing in the TEM
Session starts at 09:15 Lecture
A flexible method for the preparation of thin film samples for in situ mechanical testing in the TEM

M. Sc. Jan Philipp Liebig Prof. Dr. Mathias Göken Dr. Benoit Merle

D06: Analytical Methods for Thin Film Investigations
D06.1: Session 1: New analytical techniques for thin film characterization
Session starts at 09:15 Lecture
EnviroESCA – The Beginning of a New Era

Dr. Michael Meyer Dr. Andreas Thissen Dr. Oliver Schaff Dr. Stephan Bahr Dr. Thorsten Kampen

E08: Microstructural Evolution – recent advances in experiments and modelling
E08.1: Phase transformation and microstructural design
Session starts at 09:15 Lecture
Modeling temperature and concentration dependent solid/liquid interfacial energies

Dr. Stephanie Lippmann Prof. Dr. In-Ho Jung Dr. Manas Paliwal Prof. Dr. Markus Rettenmayr

F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.1: Session 1
Session starts at 09:15 Lecture
Influence of surface treatment on the tensile properties of annealed Mg10Gd-alloy wires

Marco Bartosch Heiner Peters Dr. Boris Schmitt Prof. Dr. Felix Berger Dr. Norbert Hort Prof. Dr. Frank Witte

F07: Polymeric Materials
F07.1: Composites
Session starts at 09:15 Lecture
Finite element simulations for characterization of the composite material behavior of aluminium-polymer-laminate foils used for stretch forming pharmaceutical packaging

Simon Mueller Prof. Dr. Sabine M. Weygand

10:30
A01: High-Temperature Functional Materials
A01.1: Sensors and Measurement Principles
Session starts at 09:15 Lecture
Homo-Epitaxial Deposition of Piezoelectric Langasite Thin Films

Dr. René Feder Prof. Dr. Holger Fritze

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.4: New Materials Concepts
Session starts at 09:15 Lecture
Nitrogen Doped Hierarchically Porous Carbon/Sulfur Cathode Electrode for Li/S battery: Mechanistic Study by Ex-situ XPS and In-situ Raman Spectroscopy

Dr. Vinayan Bhaghavathi Parambath Prof. Dr. Maximilian Fichtner

A10: Ferroelectric and Multiferroic Materials
A10.1: Ferroelectric and Multiferroic Materials I
Session starts at 09:15 Lecture
Phase transitions in the relaxor-like sodium bismuth titanate studied by density functional theory calculations

Kai-Christian Meyer Leonie Koch Prof. Dr. Karsten Albe

B01: Very High Cycle Fatigue
B01.4: VHCF IV (Specific Aspects)
Session starts at 09:15 Lecture
3D simulation of damage behavior of GFRPs in the very high cycle regime

Hinesh Madhusoodanan Dr. Eelco Jansen Prof. Dr. Raimund Rolfes

B06: Advanced Steels for Structural Applications
B06.1: High alloy TRIP/TWIP steels
Session starts at 09:15 Lecture
Deformation-induced ?-martensite vs. pressure-induced ?-iron observed in metastable high-alloy CrMnNi steel

Dr.-Ing. Anja Weidner Stephanie Ackermann Dr. Stefan Martin Dr. Marcus Schwarz Dr. Dirk Kulawinski Dr. Christian Lathe Dr. Sebastian Henkel Prof. Dr. David Rafaja Dr. Christian Schimpf Prof. Dr. Horst Biermann

B10: Surface Engineering and Functionalisation
B10.3: Session 3: B10
Session starts at 09:15 Lecture
Laser surface structuring of titanium for improving the biological performance of dental implants

Christoph Zwahr Dr. Denise Günther Nikolai Gulow Tina Brinkmann Dr. Marzellus Grosse Holthaus Prof. Dr. Andrés Lasagni Christoph Zwahr Dr. Denise Günther Prof. Dr. Andrés Lasagni

D04: Small scale and in situ mechanical testing
D04.4: In-Situ Mechanical Testing in the TEM
Session starts at 09:15 Lecture
Micromechanical properties of multilayer TiN/CrN systems by means of ex-situ tests on FIB-milled micro-pillars and micro-cantilevers: Strength and fracture toughness

Dr. Joan Josep Roa Rovira Dr. R. Rodríguez Dr. R. Martínez Prof. Dr. Luis Llanes

D06: Analytical Methods for Thin Film Investigations
D06.1: Session 1: New analytical techniques for thin film characterization
Session starts at 09:15 Highlight Lecture
The Fixed Energy X-ray Absorption Voltammetry (FEXRAV): Application to the In-situ Characterization of the Electrochemical Passivation of Palladium.

Ph.D. Alessandro Lavacchi Dr. Giordano Montegrossi Dr. Andrea Giaccherini Dr. Francesco Di Benedetto Dr. Walter Giurlani

E08: Microstructural Evolution – recent advances in experiments and modelling
E08.1: Phase transformation and microstructural design
Session starts at 09:15 Highlight Lecture
Computational design of a NiCrAlY coating alloy and experimental investigation of high temperature phase transformations

Prof. Dr. Christoph Leyens Stefan Heinze J.C. Schab Dr. P.-D. Grasso A. Stankowski

F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.1: Session 1
Session starts at 09:15 Lecture
MgZnCa-lean alloys as temporary implant material for osteosynthesis

Martina Cihova Dr. Johannes Eichler Dr. Elisabeth Martinelli Dr. Leopold Berger Prof. Dr. Peter J. Uggowitzer Prof. Dr. Annelie M. Weinberg Prof. Dr. Jörg F. Löffler

F07: Polymeric Materials
F07.1: Composites
Session starts at 09:15 Lecture
Study the effect of the thickness on the epoxy on the properties of the coating of tri-layers for steel pipelines

Dr. Benalia Kouini Prof. Aicha Serier

11:15
A01: High-Temperature Functional Materials
A01.2: Function and Structure
Session starts at 11:15 Lecture
From very high to negative thermal expansion in alkaline earth zinc silicates

Dr.-Ing. Christian Thieme Martin Schlesier Tina Waurischk Prof. Christian Rüssel

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.5: Materials for Na-ion based energy storage
Session starts at 11:15 Lecture
High conductivity and dielectric constant Na based glass electrolyte

Prof. Maria Helena Braga Andrew J. Murchison Dr. Jorge A. Ferreira Prof. Dr. John B. Goodenough

A10: Ferroelectric and Multiferroic Materials
A10.2: Ferroelectric and Multiferroic Materials II
Session starts at 11:15 Lecture
Fully integrable magnetic field sensors based on delta-E effect

Benjamin Spetzler Christine Kirchhof Jens Reermann Prof. Dr. Bernhard Wagner Prof. Dr. Gerhard Schmidt Prof. Dr. Eckhard Quandt Dr. Dirk Meyners Prof. Dr. Franz Faupel Sebastian Zabel

B01: Very High Cycle Fatigue
B01.5: VHCF V (FRP)
Session starts at 11:15 Lecture
Ultrasonic fatigue and microstructural characterization of thermoplastic and thermoset CFRP in the very high cycle fatigue regime

Prof. Dr.-Ing. Frank Balle Dr. Daniel Backe

B06: Advanced Steels for Structural Applications
B06.2: Design and Properties of Modern Steels
Session starts at 11:15 Lecture
Bainite formation: Influence of strain energy

Ashwath Maniam Ravi Prof. Jilt Sietsma Dr. Maria J. Santofimia

B10: Surface Engineering and Functionalisation
B10.4: Session 4: B10
Session starts at 11:15 Lecture
Time-variable current regimes for the surface modification of high-strength aluminium alloys by anodic oxidation

Maximilian Sieber

D04: Small scale and in situ mechanical testing
D04.5: Micromechanical Testing - Fracture Testing
Session starts at 11:15 Lecture
Constitutive Modeling of Indentation Cracking in Fused Silica

Sebastian Bruns Dr. Kurt E. Johanns Hamad ur Rehman Prof. Dr. Karsten Durst Dr. George M. Pharr

D06: Analytical Methods for Thin Film Investigations
D06.2: Session 2: application-oriented thin film characterization
Session starts at 11:15 Highlight Lecture
Characteristics of Cu2ZnSn(S,Se)4 thin film solar cells grown by thermal evaporation and thermal treatment

René Gunder Kai Neldner Laura Elisa Valle-Rios Prof. Dr. Susan Schorr Prof. Dr. Máximo León Macarrón Dr. José Manuel Merino Álvarez Eduard Garcia Llamas Dr. Raquel Caballero Mesa Yudania Sánchez Dr. Edgardo Saucedo

E08: Microstructural Evolution – recent advances in experiments and modelling
E08.2: Solid / solid phase transformation and dislocations
Session starts at 11:15 Lecture
Representative volume element (RVE) studies for the simulation of mechanical effects related to transformation induced plasticity

Alexander Sannikov

F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.2: Session 2
Session starts at 11:15 Highlight Lecture
Bone mineralization and degrading Mg implants – Can we determine the nanostructural response and the fate of degradation products with multi-modal synchrotron x-ray imaging?

Tilman Gruenewald Dr. Harald Rennhofer Martin Meischel Vicki Nue Dr. Bernhard Hesse Dr. Manfred Burghammer Dr. Thomas Huthwelker Prof. Dr. Henrik Birkedal Prof. Dr. Annelie Weinberg Prof. Dr. Jörg Löffler Prof. Dr. Stefanie Stanzl-Tschegg Prof. Dr. Helga Lichtenegger

F07: Polymeric Materials
F07.2: Polymer Fundamentals
Session starts at 11:15 Lecture
Melt processed polymer nanocomposites with mixed filler systems for thermoelectric applications

Dr.-Ing. Petra Pötschke Dr. Jinji Luo Dr. Beate Krause Dr. Marco Liebscher

11:30
A01: High-Temperature Functional Materials
A01.2: Function and Structure
Session starts at 11:15 Lecture
The Mechanical Properties of a PM1000 and PM2000Oxide-Dispersion-Strengthened Alloy tested by High Temperature Nanoindentation Testing

Dr. Ude Dirk Hangen Prof. Dr. Asta Richter Prof. Dr. Chung-Liang Cheng

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.5: Materials for Na-ion based energy storage
Session starts at 11:15 Lecture
Synthesis and Electrochemical Properties of Na3V3P2O13 as Cathode Material for Sodium-Ion Batteries

Dr. Anji Reddy Munnangi Dr. Oliver Clemens Prof. Dr. Maximilian Fichtner

A10: Ferroelectric and Multiferroic Materials
A10.2: Ferroelectric and Multiferroic Materials II
Session starts at 11:15 Lecture
Multiferroic clusters: a new perspective for relaxor-type room-temperature multiferroics

Dr. Leonard Henrichs Dr. Oscar Cespedes Dr. James Bennett Joachim Landers Soma Salamon Dr. Christian Heuser Dr. Thomas Hansen Tim Helbig Prof. Dr. Oliver Gutfleisch Prof. Dr. Doru Lupascu Prof. Dr. Heiko Wende Prof. Dr. Wolfgang Kleemann Prof. Dr. Andrew Bell

B01: Very High Cycle Fatigue
B01.5: VHCF V (FRP)
Session starts at 11:15 Lecture
Application of a Nonlinearities Based Inverse Approach for the Evaluation of Damage Mechanisms in Very High Cycle Fatigued CFRP Structures

Prof. Dr. Peter Starke Ramanan Sridaran Venkat Prof. Dr. Christian Boller Dr. Daniel Backe Prof. Dr. Frank Balle Dr. Bernd Müller Thomas Heckel Dirk Gohlke Prof. Dr. Giovanni Bruno

B06: Advanced Steels for Structural Applications
B06.2: Design and Properties of Modern Steels
Session starts at 11:15 Lecture
Effect of High Reduction Ratio and Thermomechanical Processing on the Grain Size and Mechanical Properties of Long Bar Products

Linda Oberli Linda Oberli Guido Olschewski Thorsten Müller Stefan vom Feld Dr. Fritz Jakob Dr.-Ing. Mirkka Lembke

B10: Surface Engineering and Functionalisation
B10.4: Session 4: B10
Session starts at 11:15 Lecture
The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings

Dr. Manel Rodriguez Ripoll Niko Ojala Christian Katsich Dr. Vladimir Totolin Dr. Christian Tomastik Dr. Klaudia Hradil

D04: Small scale and in situ mechanical testing
D04.5: Micromechanical Testing - Fracture Testing
Session starts at 11:15 Lecture
The Strength and Fracture Behaviour of Soft Magnetic Composites in Bending on Different Length Scales

Tabea Schwark Dr. Ruth Schwaiger Prof. Dr. Oliver Kraft

D06: Analytical Methods for Thin Film Investigations
D06.2: Session 2: application-oriented thin film characterization
Session starts at 11:15 Lecture
Microstructural Analysis of CuInSe2 Thin Films by Grazing Incidence X-Ray Diffraction

Leonhard Leppin René Gunder Helena Stange Prof. Dr. Susan Schorr

E08: Microstructural Evolution – recent advances in experiments and modelling
E08.2: Solid / solid phase transformation and dislocations
Session starts at 11:15 Lecture
Plastic accommodation in austenite matrix during the formation of lath martensite of Fe-Ni alloy

Dr. Junya Inoue Taku Niino Dr. Mayumi Ojima Prof. Akinori Yamanaka Prof. Toshihiko Koseki

F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.2: Session 2
Session starts at 11:15 Lecture
Quantitative characterization of physiological degradation processes in situ by means of a bioreactor coupled flow chamber using timelapse SRµCT

Dr. Jörg U. Hammel Dr. Frank Feyerabend Thomas Dose Alexander Hipp Dr. Fabian Wilde Dr. Felix Beckmann

F07: Polymeric Materials
F07.2: Polymer Fundamentals
Session starts at 11:15 Lecture
Electro-mechanical instability of viscous dielectric elastomer actuators under prestretch

Dipl.-Ing. Dagmar Eder-Goy Ying Zhao Prof. Bai-Xiang Xu

11:45
A01: High-Temperature Functional Materials
A01.2: Function and Structure
Session starts at 11:15 Lecture
PZN-PT Perovskite Nanoparticles Thin Layer Deposition on Nanostructured p-Type Silicon Substrate for an Inorganic - Perovskite Solar Cells Application

Prof. Diouma Kobor Moussa Touré Rémi Ndioukane Dr. Modou Tine Prof. Laurence Motte

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.5: Materials for Na-ion based energy storage
Session starts at 11:15 Lecture
On Improvements of Sodium Manganese Oxide Materials as Sodium-Ion Battery (NIB) Cathode

Dr. Nicolas Bucher Dr. Steffen Hartung Dr. Joseph B. Franklin Dr. Anna M. Wise Dr. Linda Y. Lim Han-Yi Chen Dr. Johanna Nelson Weker Dr. Michael F. Toney Prof. Madhavi Srinivasan

A10: Ferroelectric and Multiferroic Materials
A10.2: Ferroelectric and Multiferroic Materials II
Session starts at 11:15 Lecture
Electret-based electrostatic sensors for sub-nT magnetic fields

Stefan Schröder Sebastian Zabel Dr. Thomas Strunskus Prof. Dr. Franz Faupel

B01: Very High Cycle Fatigue
B01.5: VHCF V (FRP)
Session starts at 11:15 Lecture
Experimental investigations on the fatigue damage evolution in transversely loaded carbon fibre reinforced plastics (CFRP) using acoustic emission

Johannes Marder Prof. Dr. Christian Hopmann Martin Brust

B06: Advanced Steels for Structural Applications
B06.2: Design and Properties of Modern Steels
Session starts at 11:15 Lecture
Load sequence effects on fatigue crack growth of high-strength steels by experimental and numerical analysis

Dipl.-Ing. David Simunek Dr. Martin Leitner Prof. Dr. Florian Grün

B10: Surface Engineering and Functionalisation
B10.4: Session 4: B10
Session starts at 11:15 Lecture
Characterization of surface morphology of cryogenic turned metastable austenitic steel AISI 347

Dr. Marek Smaga Prof. Dr. Tilmann Beck Robert Skorupski Prof. Dr. Dietmar Eifler

D04: Small scale and in situ mechanical testing
D04.5: Micromechanical Testing - Fracture Testing
Session starts at 11:15 Lecture
Fracture toughness of alpha-Cr / NiAl bond coats determined by micro cantilever bending tests

Sven Giese Dr. Ralf Webler Dr. Steffen Neumeier Prof. Dr. Mathias Göken

D06: Analytical Methods for Thin Film Investigations
D06.2: Session 2: application-oriented thin film characterization
Session starts at 11:15 Lecture
Strain and crystallites size of Cu2S ultra-thin films grown by E-ALD: Operando characterization by means of SXRD

Andrea Giaccherini Enrico Berretti Dr. Roberto Felici Dr. Francesco Carlà Dr. Alessandro Lavacchi Giordano Montegrossi Prof. Massimo Innocenti Maurizio Passaponti Dr. Francesco Di Benedetto

E08: Microstructural Evolution – recent advances in experiments and modelling
E08.2: Solid / solid phase transformation and dislocations
Session starts at 11:15 Lecture
Influence of the Initial Microstructure on the Kinetics of Microstructural Evolutions During Ageing in the Titanium Alloy Ti17

Dipl.-Ing. Nicolas Maury Dr. Moukrane Dehmas Dr. Elisabeth Aeby-Gautier Benoît Denand Dr. Benoît Appolaire Dr. Claude Archambeau-Mirguet Dr. Jérôme Delfosse Philippe Emile

F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.2: Session 2
Session starts at 11:15 Lecture
Cell adhesion on surface-functionalized magnesium

Dr.-Ing. Victoria Wagener Prof. Dr. Sannakaisa Virtanen

F07: Polymeric Materials
F07.2: Polymer Fundamentals
Session starts at 11:15 Lecture
Effect of high-intensity irradiance on Poly(lactic acid) under various aging conditions

Prof. Dr. Jörg Meyer Prof. Dr. Jörg Meyer Dr. Frank Tappe Prof. Dr. Klaus Huber

12:00
A01: High-Temperature Functional Materials
A01.2: Function and Structure
Session starts at 11:15 Lecture
High Temperature Oxidation of Chromium in air: Facts and Figure

Ali Solimani Prof. Mathias C. Galetz

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.5: Materials for Na-ion based energy storage
Session starts at 11:15 Lecture
Electrochemical characterization of a hard carbon/Na0.95Ni0.32Ti0.32Mg0.16Mn0.21O2 sodium-ion battery

Dr. Laida Otaegui

A10: Ferroelectric and Multiferroic Materials
A10.2: Ferroelectric and Multiferroic Materials II
Session starts at 11:15 Lecture
Multiferroic thin film characterization probed by Terahertz transient pulses

Moumita Dutta

B01: Very High Cycle Fatigue
B01.5: VHCF V (FRP)
Session starts at 11:15 Lecture
Investigation of micro defects in fiber-reinforced-plastics under cyclic loading with X-Ray-Refractography

Alexander Müller Prof. Dr. Volker Trappe

B06: Advanced Steels for Structural Applications
B06.2: Design and Properties of Modern Steels
Session starts at 11:15 Lecture
Alternative pathways for high modulus steel design – a combinatorial approach utilising Fe – B – X systems

Christian Baron Dr. Hauke Springer Prof. Dr. Dierk Raabe

B10: Surface Engineering and Functionalisation
B10.4: Session 4: B10
Session starts at 11:15 Lecture
Effect of fuel and shroud gas variation in HVOF on microstructure and corrosion properties of pure nickel coatings

Dr. Carina Hambrock Carina Grill Gabriela Schimo Prof. Dr. Achim Walter Hassel

D04: Small scale and in situ mechanical testing
D04.5: Micromechanical Testing - Fracture Testing
Session starts at 11:15 Highlight Lecture
Determination of the fracture toughness of single crystalline microscale cantilever beams by combining fracture experiments and numerical simulations

Tillmann Volz Prof. Dr. Sabine Weygand Nicola Schmitt Dr. Christoph Bohnert Dr. Ruth Schwaiger

D06: Analytical Methods for Thin Film Investigations
D06.2: Session 2: application-oriented thin film characterization
Session starts at 11:15 Lecture
Electrochemical atomic layer deposition of CuZnS and CdS films for photovoltaic applications

Ph.D. Enrico Berretti Prof. Francesco Di Benedetto Andrea Giaccherini Prof. Nicola Cioffi Ferdinando Capolupo Dr. Rosaria Anna Picca Maurizio Passaponti Prof. Massimo Innocenti

E08: Microstructural Evolution – recent advances in experiments and modelling
E08.2: Solid / solid phase transformation and dislocations
Session starts at 11:15 Lecture
Dislocation assisted rafting in Nickel-based superalloys: a coupled phase-field / continuum dislocation dynamics model

Institut für Werkstoffsimulation Friedrich-Alexander-Universität Erlangen-Nürnberg Ronghai Wu

F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.2: Session 2
Session starts at 11:15 Lecture
Magnesium and its effect on human osteoclasts and osteoblasts differentiation

Dr. Berengere Luthringer Lili Wu Dr. Frank Feyerabend Prof. Dr. Arndt Schilling Prof. Dr. Regine Willumeit-Römer

F07: Polymeric Materials
F07.2: Polymer Fundamentals
Session starts at 11:15 Lecture
Fog Harvesting Surfaces of Polydimethylsiloxane (PDMS) Islands on Superomniphobic Electrospun Nanofibers

Alexander Davis Dr. Ilker S. Bayer Dr. Athanassia Athanassiou

12:15
A01: High-Temperature Functional Materials
A01.2: Function and Structure
Session starts at 11:15 Lecture
Crystallographic Processes Governing Memory Behaviour of Shape Memory Alloys

Prof. Dr. Osman Adiguzel

A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.5: Materials for Na-ion based energy storage
Session starts at 11:15 Lecture
Comparative computational study of lithium and sodium insertion in van der Waals and covalent tetracyanoethylene (TCNE) -based crystals as promising materials for organic lithium and sodium ion batteries

Yingqian Chen Dr. Sergei Manzhos

A10: Ferroelectric and Multiferroic Materials
A10.2: Ferroelectric and Multiferroic Materials II
Session starts at 11:15 Lecture
Preparation of multifunctional thin films by combination of nanosized building blocks

Dipl.-Ing. Tobias Preller Prof. Dr. Georg Garnweitner

B01: Very High Cycle Fatigue
B01.5: VHCF V (FRP)
Session starts at 11:15 Lecture
Influence of graphene nanoparticle modification on crack initiation in epoxy matrix and the different layers of CFRP cross-ply laminates under static and cyclic loading

Dipl.-Ing. Christian Leopold Julia Kosmann Dr. Wilfried Liebig Prof. Dr. Bodo Fiedler

B06: Advanced Steels for Structural Applications
B06.2: Design and Properties of Modern Steels
Session starts at 11:15 Lecture
Micro-damage initiation in DP-steel: a multi-scale mechanical characterization of grain and interphase boundaries

Fady Archie Xiaolong Li Dr. Stefan Zaefferer

B10: Surface Engineering and Functionalisation
B10.4: Session 4: B10
Session starts at 11:15 Lecture
Interdiffusion in MCrAlY coated nickel-base superalloys

Moritz Elsaß Dr. Martin Frommherz Dr. Alfred Scholz Prof. Dr. Matthias Oechsner

D04: Small scale and in situ mechanical testing
D04.5: Micromechanical Testing - Fracture Testing
Session starts at 11:15 Lecture
Understanding fracture of miniaturized LiTaO3 and LiNbO3 single crystal specimens

Dipl.-Ing. Manuel Gruber Prof. Dr. Raul Bermejo Jeroen Bielen Prof. Dr. Peter Supancic Prof. Dr. Robert Danzer Prof. Dr. Daniel Kiener

D06: Analytical Methods for Thin Film Investigations
D06.2: Session 2: application-oriented thin film characterization
Session starts at 11:15 Lecture
Development and characterization of novel nanostructured thin film materials

René Böttcher Sabine Günschmann Dr. Susanne Schiermeyer Prof. Dr. Lothar Spieß Dr. Thomas Kups Anna Franz Diana Rossberg Prof. Dr. Peter Schaaf

E08: Microstructural Evolution – recent advances in experiments and modelling
E08.2: Solid / solid phase transformation and dislocations
Session starts at 11:15 Lecture
Acoustic Induced Vibration and Failure Assessment in Piping

Prof. Dr. Bakr Rabeeh Prof. Dr. Yasser Fouad

F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.2: Session 2
Session starts at 11:15 Lecture
On the determination of magnesium degradation rates under physiological conditions

Dipl.-Ing. Eshwara Phani Shubhakar Nidadavolu Dr. Frank Feyerabend Dr. Thomas Ebel Prof. Dr. Regine Willumeit-Römer Prof. Dr. Michael Dahms

F07: Polymeric Materials
F07.2: Polymer Fundamentals
Session starts at 11:15 Lecture
Bioinspired composite pillar structures for enhanced adhesion on rough surfaces

M. Sc. Sarah Fischer Dr. René Hensel Prof. Dr. Eduard Arzt

12:30
A02: Advanced Materials for Lithium and Post Lithium Batteries
A02.5: Materials for Na-ion based energy storage
Session starts at 11:15 Lecture
Solid state sodium battery with ceramic electrolyte and thin film electrodes cycling at room temperature

Marie Guin Katie Browning Dr. Frank Tietz Dr. Gabriel Veith Prof. Dr. Olivier Guillon

A10: Ferroelectric and Multiferroic Materials
A10.2: Ferroelectric and Multiferroic Materials II
Session starts at 11:15 Lecture
Identifying materials and their properties – how SpringerMaterials supports researchers in academia and industry

Dr. Michael Klinge

B01: Very High Cycle Fatigue
B01.5: VHCF V (FRP)
Session starts at 11:15 Lecture
Semi-analytic modelling strategy for the initiation and evolution of transverse cracking of CFRP with and without nano-modified matrix

Gordon Just Ilja Koch Maik Gude

B06: Advanced Steels for Structural Applications
B06.2: Design and Properties of Modern Steels
Session starts at 11:15 Lecture
Deformation behavior of kappa-carbide-free and kappa-carbide-containing FeMnAlC lightweight steel

Dr.-Ing. Christian Haase Christoffer Zehnder Tobias Ingendahl André Bikar Florian Tang Bengt Hallstedt Weiping Hu Wolfgang Bleck Dmitri A. Molodov

B10: Surface Engineering and Functionalisation
B10.4: Session 4: B10
Session starts at 11:15 Lecture
The formation of nano-whiskers in Al2O3-C- and MgO-C-refractories as investigated by EBSD

Dr. Harry Berek Prof. Dr. Christos G. Aneziris Vassili Roungos Dr. Annika Mertke

D04: Small scale and in situ mechanical testing
D04.5: Micromechanical Testing - Fracture Testing
Session starts at 11:15 Lecture
Full fracture mechanical characterization of conducting ductile materials with the modified instrumented impact notch test

Jakob Breiner Prof. Dr. Dierk Hartmann Prof. Dr. Andreas Bührig-Polaczek

D06: Analytical Methods for Thin Film Investigations
D06.2: Session 2: application-oriented thin film characterization
Session starts at 11:15 Lecture
Dielectric spectroscopy and polarizing microscopy in liquid crystal thin film research

Jakub Fitas Dr. Monika Marzec Marta Szymkowiak

E08: Microstructural Evolution – recent advances in experiments and modelling
E08.2: Solid / solid phase transformation and dislocations
Session starts at 11:15 Lecture
Towards a more thorough understanding of dislocation contributions in shape-memory alloys

Prof. Dr. Heike Emmerich Dr. Julia Kundin

F02: Degradation Mechanisms and Characterization of Biodegradable Materials
F02.2: Session 2
Session starts at 11:15 Lecture
Optimization of PEO synthesis parameters for the production of corrosion resistant ceramic coatings on Mg-Ca-Zn alloys.

M.Sc. Dario Porchetta Ole Jung Alexander Kopp Christoph Ptock Lisa Lauts Dr. Philip Hartjen

F07: Polymeric Materials
F07.2: Polymer Fundamentals
Session starts at 11:15 Lecture
Smart Solvogels. A new kind of polymeric materials with useful properties

Prof. Dr. Cesar Barbero Maria Victoria Martinez Silvestre Bongiovanni Abel Dr. Claudia Rivarola Prof. Dr. María Cristina Miras

14:45
A11: Hierarchical Materials
A11.1: Session 1
Session starts at 14:45 Keynote Lecture
High Temperature Photonics

Prof. Dr. Manfred Eich

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.1: Titanium aluminide alloys
Session starts at 14:45 Keynote Lecture
Status of Titanium Aluminide for Aero Engine Applications

Dr. Martin Schloffer Dr. Wilfried Smarsly Dr. Jörg Esslinger Prof. Dr. Helmut Clemens

B09: Mechanical Properties and Microstructure
B09.1: Session 1
Session starts at 14:45 Lecture
Investigation on the correlation between process, microstructure and properties in high silicon ductile iron with special focus on graphite degeneration

Jessica Frieß Prof. Dr. Andreas Bührig-Polaczek

C07: Advanced technologies for the surface processing of sensitive materials
C07.1: Session 1
Session starts at 14:45 Lecture
In-situ XPS analysis of laser-induced surface nitridation of Ti and Ta metals

Prof. Dr. Augustin R. González-Elipe Dr. Ruth Lahoz Prof. Dr. Juan Pedro Espinos Dr. Francisco Yubero Prof. Dr. German de la Fuente

D01: Advanced and In-Situ Microscopies and Spectroscopies of Functional Nanostructures in Materials Science and Engineering
D01.1: Session 1 High-resolution TEM and spectroscopy in MSE
Session starts at 14:45 Keynote Lecture
Impact of Aberration-Corrected Electron Microscopy on Advanced Materials Research

Prof. David Smith

D02: Application of orientation contrast microscopy for the investigations of phase transformations and plastic deformation
D02.1: Phase reconstruction based on EBSD measurements
Session starts at 14:45 Keynote Lecture
A review of recent developments for parent microtexture reconstruction with Merengue 2 Application to the analysis of the deformation substructure of austenite and its influence on microstructure inheritance in low carbon steels

Dr. Lionel Germain Dr. Nathalie Gey Dr. Elodie Boucard Dr. Sebastian Cobo Prof. Dr. Michel Humbert

D04: Small scale and in situ mechanical testing
D04.6: In-Situ Mechanical Testing in the SEM
Session starts at 14:45 Highlight Lecture
In-situ EBSD measurements during micro-cantilever fracture experiments in single-crystalline B2-NiAl and tungsten

Dr. Johannes Ast Dr. Johann Michler Dr. Xavier Maeder

E01: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers
E01.1: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers I
Session starts at 14:45 Lecture
A Mean-Field Description for Elongated Microstructures in Ellipsoidal Samples of Magneto-Sensitive Elastomers

Dirk Romeis Dr. Marina Saphiannikova

E02: Experimental and Computational Thermodynamics and Kinetics
E02.1: Lithium-Ion Batteries
Session starts at 14:45 Keynote Lecture
Electromotive force study of Li-Sb alloys

Dr.-Ing. Przemyslaw Fima Sylwia Terlicka

E07: Integrated Computational Materials Engineering (ICME) for Materials Design using Numerical Synchronized Approaches Linking Different Scale Algorithms
E07.1: Session 1
Session starts at 14:45 Highlight Lecture
Multiscale modeling of bakes hardening effect on the mechanical behavior of DP steels

Ali Ramazani Dr. Ulrich Prahl Prof. Ronald Larson

F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Lecture
Development of a Bone Substitute from Mineralized Phosphate Prestructured Gelatine

Benjamin Kruppke Dr. Christiane Heinemann Claudia Kreschel Sina Rößler Alena Svenja Wagner Prof. Dr. Sabine Wenisch Prof. Dr. Hartmut Worch Dr. Thomas Hanke

15:00
B09: Mechanical Properties and Microstructure
B09.1: Session 1
Session starts at 14:45 Lecture
Influence of Al content on mechanical properties of ultra high strength steel

Kenji Sugiyama Hiroyuki Takabayashi Shigeki Ueta

C07: Advanced technologies for the surface processing of sensitive materials
C07.1: Session 1
Session starts at 14:45 Lecture
Surface Alloying of Al coatings on P92 Steels by Laser Line Scanning

Dipl.-Ing. Hector Santos Prof. Dr. F. J. Trujillo Prof. Dr. X. de la Fuente

D04: Small scale and in situ mechanical testing
D04.6: In-Situ Mechanical Testing in the SEM
Session starts at 14:45 Lecture
Stress Relaxation during FIB Milling Assessed by Digital Image Correlation, In Situ Micro-Raman Spectroscopy and Electron Backscatter Diffraction

Christoph Schmid Enrico Bruder Jirí Dluhoš Rostislav Vána Lisa Benker Mathias Göken Karsten Durst

E01: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers
E01.1: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers I
Session starts at 14:45 Lecture
Modeling and simulation of coupling effects in magnetorheological elastomers

Dipl.-Ing. Philipp Metsch Karl Kalina Dr. Markus Kästner

E07: Integrated Computational Materials Engineering (ICME) for Materials Design using Numerical Synchronized Approaches Linking Different Scale Algorithms
E07.1: Session 1
Session starts at 14:45 Lecture
Phase-field crystal modelling for ICME: Scale-bridging description of nonlinear elastic effects

Marc Weikamp Dr. Claas Hüter Diego Schicchi Prof. Dr. Robert Spatschek Dr. Martin Hunkel Mingxuan Lin Dr. Ulrich Prahl Dr. Martin Friák

F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Lecture
Development of new beta-Ti alloys for hard tissue replacement

Stefan Pilz Romy Schmidt André Reck Prof. Dr. Mariana Calin Dr. Ute Hempel Prof. Dr. Jens Freudenberger Prof. Dr. Martina Zimmermann Prof. Dr. Jürgen Eckert Dr. Annett Gebert

15:15
A11: Hierarchical Materials
A11.1: Session 1
Session starts at 14:45 Lecture
Self-Assembled Mechanical Metamaterials Based on Inverse Opals

Jefferson J. do Rosario Prof. Dr. Erica T. Lilleodden Martin Waleczek Dr. Roman Kubrin Dr. Alexander Yu. Petrov Dr. Pavel N. Dyachenko Julian E.C. Sabisch Prof. Dr. Kornelius Nielsch Prof. Dr. Norbert Huber Prof. Dr. Manfred Eich Prof. Dr. Gerold A. Schneider

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.1: Titanium aluminide alloys
Session starts at 14:45 Lecture
Ti–Al material for high-temperature applications: Combustion synthesis from oxide raw materials

Ph.D. Denis Ikornikov Dr. Dmitrii Andreev Prof. Dr. Vladimir Yukhvid Dr. Vladimir Sanin

B09: Mechanical Properties and Microstructure
B09.1: Session 1
Session starts at 14:45 Lecture
Low Cycle Fatigue behaviour of an ultrafine-grained high alloy TRIP steel

Matthias Droste Michael Fleischer Dr. Anja Weidner Prof. Dr. Horst Biermann

C07: Advanced technologies for the surface processing of sensitive materials
C07.1: Session 1
Session starts at 14:45 Lecture
Fabrication of Self-supported thin electrolytic membranes by laser ablation

Dr. Ruth Lahoz José Antonio Cebollero Dr. Miguel A. Laguna-Bercero Dr. Angel Larrea

D01: Advanced and In-Situ Microscopies and Spectroscopies of Functional Nanostructures in Materials Science and Engineering
D01.1: Session 1 High-resolution TEM and spectroscopy in MSE
Session starts at 14:45 Highlight Lecture (Symp. D01)
Plasmons in Mesoscopic Gold Tapers

Prof. Dr. Peter A. van Aken Surong Guo Dr. Wilfried Sigle Christian Knipl Martin Esmann Simon F. Becker Ralf Vogelgesang Christoph Lienau

D02: Application of orientation contrast microscopy for the investigations of phase transformations and plastic deformation
D02.1: Phase reconstruction based on EBSD measurements
Session starts at 14:45 Lecture
ARPGE (Automatic Reconstruction of Parent Grains from EBSD) : crystallographic bases, applications, limitations and perspectives.

Dr. Cyril Cayron

D04: Small scale and in situ mechanical testing
D04.6: In-Situ Mechanical Testing in the SEM
Session starts at 14:45 Lecture
Miniaturized Fracture Mechanics for Multi-layered Thin Film Systems

Dipl.-Ing. Ruth Konetschnik Darjan Kozic Ronald Schöngrundner Hans-Peter Gänser Roland Brunner Daniel Kiener

E01: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers
E01.1: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers I
Session starts at 14:45 Lecture
Chemo-mechanical coupling in shape memory polymers: Theory versus experiment

Dipl.-Ing. Elias Mahmoudinezhad Zirdehi Dr. Fathollah Varnik

E02: Experimental and Computational Thermodynamics and Kinetics
E02.1: Lithium-Ion Batteries
Session starts at 14:45 Lecture
Thermodynamic Study of the Li-Sb System

Dr. Dajian Li Alexander Beutl Prof. Dr. Hans Flandorfer Dr. Damian M. Cupid

E07: Integrated Computational Materials Engineering (ICME) for Materials Design using Numerical Synchronized Approaches Linking Different Scale Algorithms
E07.1: Session 1
Session starts at 14:45 Lecture
D2C - analyzing, comparing, and validating arbitrary dislocation microstructure within a multiscale data framework

Institut für Werkstoffsimulation Friedrich-Alexander-Universität Erlangen-Nürnberg Dominik Steinberger Dr. Nina Gunkelmann

F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Lecture
Injectable strontium-modified calcium phosphate cement for the therapy of osteoporotic bone defects

Dr. Anja Lode Tilman Ahlfeld Prof. Dr. Michael Gelinsky Dr. Matthias Schumacher

15:30
A11: Hierarchical Materials
A11.1: Session 1
Session starts at 14:45 Lecture
Electrochemically Tunable Resistance of Nanoporous Metals Produced by Dealloying

Dipl.-Ing. Eva-Maria Steyskal Michael Seidl Prof. Roland Würschum

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.1: Titanium aluminide alloys
Session starts at 14:45 Lecture
Ordering and disordering of ? phase in TiAl alloys in dependence of alloys composition

Ph.D. Victoria Kononikhina Dr. Andreas Stark Prof. Dr. Florian Pyczak Dr. Weimin Gan Prof. Dr. Andreas Schreyer

B09: Mechanical Properties and Microstructure
B09.1: Session 1
Session starts at 14:45 Lecture
Total strain controlled fatigue of the ductile cast iron EN-GJS-600 (ASTM 80-55-06) in the frequency range from 0.005 Hz to 92 Hz

Dipl.-Ing. Benjamin Jost Dr. Marcus Klein Prof. Dr. Tilmann Beck Prof. Dr. Dietmar Eifler

C07: Advanced technologies for the surface processing of sensitive materials
C07.1: Session 1
Session starts at 14:45 Lecture
Utilizing a femtosecond laser for structuring of TiO2 thin films produced by PECVD for photoelectrochemical water splitting.

Danny Bialuschewski Jan Hoppius Prof. Dr. Evgeny Gurevich Dr. Yakup Gönüllü Prof. Dr. Sanjay Mathur

D02: Application of orientation contrast microscopy for the investigations of phase transformations and plastic deformation
D02.1: Phase reconstruction based on EBSD measurements
Session starts at 14:45 Lecture
Prior austenitic phase reconstruction using Markov clustering

Dr.-Ing. Edgar Gomes de Araujo Prof. Dr. Leo Kestens

D04: Small scale and in situ mechanical testing
D04.6: In-Situ Mechanical Testing in the SEM
Session starts at 14:45 Lecture
Where are the limits of classical fracture mechanics at the micro-scale? In–situ micro-bending and micro-tensile tests for fatigue crack initiation, fatigue crack growth and static fracture toughness

Dipl.-Ing. Florian Schäfer Patrick Grünewald Lena Eisenhut Dr. Michael Marx Prof. Dr. Christian Motz

E01: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers
E01.1: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers I
Session starts at 14:45 Lecture
Ripening and rearrangements of precipitates under mechanochemical coupling

Dr. Reza Darvishi Kamachali Christian Schwarze Prof. Dr. Ingo Steinbach

E02: Experimental and Computational Thermodynamics and Kinetics
E02.1: Lithium-Ion Batteries
Session starts at 14:45 Keynote Lecture
Integrated Computational Materials Engineering (ICME) of alloy anode materials for Li-ion batteries

Dr. Thomas Reichmann Dr. Dajian Li Dr. Damian Cupid

E07: Integrated Computational Materials Engineering (ICME) for Materials Design using Numerical Synchronized Approaches Linking Different Scale Algorithms
E07.1: Session 1
Session starts at 14:45 Lecture
Analysis and Data Mining of Discrete Dislocation Data with the D2C Framework

Dominik Steinberger Dr. Stefan Sandfeld

F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Lecture
Development and in vitro activity assessment of novel silicon oxycarbide-based bioactive glasses

Dr. Emanuel Ionescu Dr. Emanuel Ionescu Prof. Dr. Ralf Riedel Prof. Dr. Aldo Boccaccini Prof. Rainer Detsch

15:45
A11: Hierarchical Materials
A11.1: Session 1
Session starts at 14:45 Lecture
A numerical modelling approach to investigate the mechanical response of nanoporous gold using beam element

Dr. Jingsi Jiao Benedikt Roschning Prof. Dr. Norbert Huber

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.1: Titanium aluminide alloys
Session starts at 14:45 Lecture
Near-surface residual stress in TiAl after high temperature

Dr. Jonathan D.H. Paul Dr. Michael Oehring Dr. Fritz Appel Prof. Dr. Florian Pyczak

B09: Mechanical Properties and Microstructure
B09.1: Session 1
Session starts at 14:45 Lecture
Influence of pre-corrosion caused by synthetic exhaust gas condensate on tensile and fatigue properties of brazed AISI 304/BNi-2 joints

Anke Schmiedt David Nowak Matthias Manka Lukas Wojarski Prof. Dr. Wolfgang Tillmann Prof. Dr. Frank Walther

C07: Advanced technologies for the surface processing of sensitive materials
C07.1: Session 1
Session starts at 14:45 Lecture
Plasma Deposition and Modification of Metal Oxide Nanosurfaces and Hetero-interfaces for Solar Harvesting Applications

Dr. Yakup Gönüllü Myeongwhun Pyeon Ali Kaouk Sanjay Mathur

D01: Advanced and In-Situ Microscopies and Spectroscopies of Functional Nanostructures in Materials Science and Engineering
D01.1: Session 1 High-resolution TEM and spectroscopy in MSE
Session starts at 14:45 Lecture
Quantifying nanoscale heat conduction using in-situ thermal measurement technique

Dr. Norvik Voskanian Dr. Lunjie Zeng Dr. Andrew Yankovich Prof. Dr. Eva Olsson

D02: Application of orientation contrast microscopy for the investigations of phase transformations and plastic deformation
D02.1: Phase reconstruction based on EBSD measurements
Session starts at 14:45 Lecture
Texture evolution in thick plates of low carbon steels after rolling at high temperatures

Dr. Minh Tuan Nguyen Prof. Dr. Roumen Petrov Prof. Dr. Leo Kestens

D04: Small scale and in situ mechanical testing
D04.6: In-Situ Mechanical Testing in the SEM
Session starts at 14:45 Lecture
Tensile deformation of CP titanium using in-situ EBSD analysis and crystal plasticity simulations

Dr. Joo-Hee Kang Prof. Ji Hoon Kim Dr. Chang-Seok Oh

E01: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers
E01.1: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers I
Session starts at 14:45 Lecture
Thermodynamics and kinetics of precipitate formation in the Al-Sc system

Ankit Gupta Bengü Tas-Kavakbasi Dr. Biswanath Dutta Dr. Tilmann Hickel Dr. Sergiy V. Divinski Prof. Gerhard Wilde Prof. Dr. Jörg Neugebauer

E07: Integrated Computational Materials Engineering (ICME) for Materials Design using Numerical Synchronized Approaches Linking Different Scale Algorithms
E07.1: Session 1
Session starts at 14:45 Lecture
Attractor modelling effect in microstructure data analysis as a predictive indicator of material scales

Dr. Fairouz Bettayeb Boubakr BOUSSIALA Dr. Amar BOUTAGHANE

F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Lecture
Is the Sheep the right model for osteoporosis research?

Dr. Thaqif El Khassawna Prof. Dr. Christian Heiss Prof. Dr. Wolfgang Böcker Prof. Dr. Katrin Susanne Lips

16:00
A11: Hierarchical Materials
A11.1: Session 1
Session starts at 14:45 Lecture
Electro-Polymerisation of Pyrrole in Porous Silicon - Interface-controlled Nano-Hybrids

Dr.-Ing. Thomas F. Keller Guido Dittrich Prof. Dr. Patrick Huber

B09: Mechanical Properties and Microstructure
B09.1: Session 1
Session starts at 14:45 Lecture
Forming behaviour of different microstructures in partial presshardened steel

Nathalie Weiß-Borkowski Thorsten Marten Prof. Dr. Thomas Tröster

C07: Advanced technologies for the surface processing of sensitive materials
C07.1: Session 1
Session starts at 14:45 Lecture
Nano and Micro-metric Wedge Thin Films Fabricated by Plasma Enhanced Chemical Vapor Deposition

Prof. Dr. Augustin R. González-Elipe Dr. Mª Carmen Lopez-Santos Dr. Ana Borras Dr. Rafael Casquel del Campo Dr. Miguel Holgado

D01: Advanced and In-Situ Microscopies and Spectroscopies of Functional Nanostructures in Materials Science and Engineering
D01.1: Session 1 High-resolution TEM and spectroscopy in MSE
Session starts at 14:45 Lecture
Understanding the internal interfaces in semiconductor materials and devices: a correlative microscopy approach.

Dr. Oana Cojocaru-Mirédin Lamya Abdellaoui Purvesh Soni Dr. Roland Mainz Dr. Andreas Weber Dr. Daniel Abou-Ras

D02: Application of orientation contrast microscopy for the investigations of phase transformations and plastic deformation
D02.1: Phase reconstruction based on EBSD measurements
Session starts at 14:45 Lecture
Micro-fracture at prior austenite grain boundaries (PAGbs) in martensite: a coupled crystallographic-chemical investigation

Fady Archie Dr. Stefan Zaefferer

D04: Small scale and in situ mechanical testing
D04.6: In-Situ Mechanical Testing in the SEM
Session starts at 14:45 Lecture
In-situ monotonic and cyclic behavior of aluminium copper laminated metallic composites (LMCs) produced by ARB

Christian Krechel Mengyao Hu Christopher Schunk Frank Kümmel Dr. Heinz Werner Höppel Prof. Dr. Mathias Göken

E01: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers
E01.1: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers I
Session starts at 14:45 Lecture
Effect of precipitation on grain boundary diffusion in an Al-based alloy

Bengü Tas Kavakbasi Vladislav Kulitckii Ankit Gupta Yulia Buranova Biswanath Dutta Dr. Tilmann Hickel Dr. Sergiy V. Divinski Prof. Dr. Gerhard Wilde

E02: Experimental and Computational Thermodynamics and Kinetics
E02.1: Lithium-Ion Batteries
Session starts at 14:45 Lecture
Electrochemical investigations of a possible new phase in the binary Li-Sn system with an improved Coulometric Titration method

Hans Giel Dr. David Henriques Prof. Dr. Torsten Markus

E07: Integrated Computational Materials Engineering (ICME) for Materials Design using Numerical Synchronized Approaches Linking Different Scale Algorithms
E07.1: Session 1
Session starts at 14:45 Highlight Lecture
Homogenization of plastic properties of martensitic steels using crystal plasticity

Hamad ul Hassan Rehman Hameed Dr. Anxin Ma Prof. Dr. Alexander Hartmaier

F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Oral Poster
Ehancing Ultra structure preservation of bone tissue - current insights

Dr. Thaqif El Khassawna Prof. Dr. Christian Heiss Dr. Diaa Eldin Daghma

16:03
F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Oral Poster
Bone Regeneration Biomaterials in Dentistry

Ali Solimani Dr. Parisa Zarnegarnia

16:06
F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Oral Poster
Contribution to Understand the Biomineralization of Bones

Benjamin Kruppke Prof. Dr. Hartmut Worch Benjamin Kruppke Dr. Thomas Gemming

16:09
F09: Materials for Bone Tissue Regeneration
F09.1: Session 1: Development of New Materials for Bone Tissue Regeneration
Session starts at 14:45 Oral Poster
Validation of a novel hydroxyl apatite-based implant for orthopaedic indications - The example of Anterior cruciate ligament (ACL) interference screw

Dr. Thaqif El Khassawna Prof. Dr. Kurosch Rezwan Dr. Markus Engelhardt Prof. Dr. Christian Heiss

16:45
A11: Hierarchical Materials
A11.2: Session 2
Session starts at 16:45 Lecture
Innovative methods for production of hierarchically porous glasses with anisotropic pore structure.

Sharon Krenkel Prof. Dirk Enke Prof. Edda Rädlein Dr. Hans Uhlig

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.2: Superalloys and Refractories
Session starts at 16:45 Lecture
Influence of unordered gamma particles within the ordered gamma‘ phase in Ni-Al-Ti superalloys as investigated by nanoindentations

Markus Kolb Vivien Gumbert Dr. Steffen Neumeier Prof. Dr. Mathias Göken

B09: Mechanical Properties and Microstructure
B09.2: Session 2
Session starts at 16:45 Lecture
Role of TCP phases on crack propagation in high temperature fatigue of single crystal Ni-based superalloys

Carla Meid Prof. Dr. Marion Bartsch Dr. Aleksander Kostka

C07: Advanced technologies for the surface processing of sensitive materials
C07.2: Session 2
Session starts at 16:45 Lecture
From graphite to graphene, derivatives and analogs. New materials for technological applications

Prof. Dr. Cesar Barbero Yanina Pereyra Maximiliano Zensich Dr. Rebeca Rivero Nelson Gustavo Cotella Prof. Dr. Gustavo Morales Dr. Diego Acevedo Dr. Claudia Rivarola Dr. Horacio Salavagione, Prof. Dr. Maria Cristina Miras

D01: Advanced and In-Situ Microscopies and Spectroscopies of Functional Nanostructures in Materials Science and Engineering
D01.2: Session 2 Dynamic and time-resolved TEM in MSE
Session starts at 16:45 Keynote Lecture
Atomic Resolution Dynamic Observations of Steps in Grain Boundaries

Dr. Ulrich Dahmen Dr. Matt Bowers Dr. Colin Ophus Dr. Tamara Radetic Dr. Frederic Lancon

D02: Application of orientation contrast microscopy for the investigations of phase transformations and plastic deformation
D02.2: Investigation of deformation features using orientation contrast microscopy
Session starts at 16:45 Highlight Lecture
Observations of incipient plasticity in Al alloy by means of X-ray diffraction imaging techniques

Dr. Wolfgang Ludwig Nicolas Gueninchault Dr. Henry Proudhon Dr. Nicolas Vigano

D04: Small scale and in situ mechanical testing
D04.7: Other In-Situ Testing Techniques
Session starts at 16:45 Highlight Lecture
On the relevance of thresholds in the VHCF regime

Prof. Dr. Angelika Brückner-Foit Tobias Stein F. Bülbül T. Kirsten Prof. Dr. H.-J. Christ Prof. Dr. Martina Zimmmermann

E01: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers
E01.2: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers II
Session starts at 16:45 Lecture
Spatially Resolved Through-Process Modelling

Dr.-Ing. Martin Diehl Dr. Franz Roters Dr. Pratheek Shanthraj Prof. Dr. Dierk Raabe

E02: Experimental and Computational Thermodynamics and Kinetics
E02.2: Oxides and Oxidation of Metals
Session starts at 16:45 Keynote Lecture
Thermodynamic description of reactions between Mg and CaO

Prof. Dr. Rainer Schmid-Fetzer Artem Kozlov Björn Wiese Chamini Mendis Domonkos Tolnai Karl Kainer Norbert Hort

E07: Integrated Computational Materials Engineering (ICME) for Materials Design using Numerical Synchronized Approaches Linking Different Scale Algorithms
E07.2: Session 2
Session starts at 16:45 Lecture
Investigation on the thermo-mechanical properties of additive manufactured IN718 based on micromechanical simulations

Maria Baiker Jan Pagenkopf Dr. Dirk Helm

F09: Materials for Bone Tissue Regeneration
F09.2: Session 2: Compatibility, Release and Interactivity of Materials for Bone Tissue Regeneration
Session starts at 16:45 Lecture
Cellular compatibility of risedronate loaded polyelectrolyte-complex nanoparticles in vitro

Maximilian Siebert David Vehlow Romy Schmidt Dr. Annett Gebert Olga Dakischew Prof. Dr. Christian Heiß Dr. Müller Martin Prof. Dr. Katrin Susanne Lips

17:00
A11: Hierarchical Materials
A11.2: Session 2
Session starts at 16:45 Lecture
Dimerization of benzoic acid on TiO2 surfaces - an ab-initio study

Dr. Gregor Feldbauer Dr. Wolfgang Heckel Tim Würger Prof. Dr. Stefan Müller

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.2: Superalloys and Refractories
Session starts at 16:45 Lecture
Anisotropic creep properties of a single-crystal Ni3Al-based superalloy fabricated by liquid metal cooling process

Prof. Dr. Jian Zhang Dr. jian shen Dr. zhengguo xu

B09: Mechanical Properties and Microstructure
B09.2: Session 2
Session starts at 16:45 Lecture
Study of thermomechanical behavior and texture evolution of Ni based superalloy C-276

Nitesh Raj Jaladurgam Dr. Anand K Kanjarla

C07: Advanced technologies for the surface processing of sensitive materials
C07.2: Session 2
Session starts at 16:45 Lecture
New Cellulosic Materials for Packaging Applications via Reactive Extrusion of Pulp

Dr. Martin Zahel Dr. Nikita Polikarpov Tiemo Arndt

D02: Application of orientation contrast microscopy for the investigations of phase transformations and plastic deformation
D02.2: Investigation of deformation features using orientation contrast microscopy
Session starts at 16:45 Lecture
Characteristic misorientation at grain, phase and twin boundaries: reveal¬ing the character of the deformation mechanism in high-alloy TRIP/TWIP steels

Dr. Stefan Martin

D04: Small scale and in situ mechanical testing
D04.7: Other In-Situ Testing Techniques
Session starts at 16:45 Lecture
What can be learned from in-situ resistance measurements of thin polymer-supported films under mechanical load?

Dr. Oleksandr Glushko Philipp Kraker Dr. Megan Cordill

E01: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers
E01.2: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers II
Session starts at 16:45 Lecture
Multiscale finite-element and phase-field model of bainitic transformation during press hardening

Mingxuan Lin Dr. Ulrich Prahl Diego Said Schicchi Dr. Martin Hunkel Marc Weikamp Dr. Claas Hüter Dr. Robert Spatschek

E07: Integrated Computational Materials Engineering (ICME) for Materials Design using Numerical Synchronized Approaches Linking Different Scale Algorithms
E07.2: Session 2
Session starts at 16:45 Lecture
Thermo-mechanical proprieties of the steel shell formed during continuous casting process

Viktor Kripak Dr. Ulrich Prahl Prof. Dr. Wolfgang Bleck

F09: Materials for Bone Tissue Regeneration
F09.2: Session 2: Compatibility, Release and Interactivity of Materials for Bone Tissue Regeneration
Session starts at 16:45 Lecture
Mechanical characterization of a new TiNb alloy generation for implant applications

André Reck Stefan Pilz Prof. Dr. Mariana Calin Prof. Dr. Jürgen Eckert Dr. Annett Gebert Prof. Dr. Martina Zimmermann

17:15
A11: Hierarchical Materials
A11.2: Session 2
Session starts at 16:45 Lecture
Metallic-Ceramic Hierarchical Composite for Protection from Forcible Entry

Dr. Stefan Szyniszewski Kilian Fivaesh Dr. Rene Vogel Dr. Thomas Hipke

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.2: Superalloys and Refractories
Session starts at 16:45 Lecture
Microstructural evolution and creep behavior of a novel Co-base single crystal superalloy with positive lattice misfit

Dr. Fei Xue Christopher Zenk Dr. Steffen Neumeier Prof. Dr. Mathias Göken

B09: Mechanical Properties and Microstructure
B09.2: Session 2
Session starts at 16:45 Lecture
Structure property relationships in five-component equiatomic solid solutions

Prof. Dr. Jens Freudenberger Dr. David Geissler Dr. Alexander Kauffmann Prof. Dr. Martin Heilmaier Prof. Dr. Kornelius Nielsch

C07: Advanced technologies for the surface processing of sensitive materials
C07.2: Session 2
Session starts at 16:45 Lecture
Estimating Area in Molecular Contact using Förster Resonance Energy Transfer Microscopy (FRET)

Dipl.-Ing. Georg Urstöger Georg Urstöger Prof. Dr. Ulrich Hirn

D01: Advanced and In-Situ Microscopies and Spectroscopies of Functional Nanostructures in Materials Science and Engineering
D01.2: Session 2 Dynamic and time-resolved TEM in MSE
Session starts at 16:45 Highlight Lecture (Symp. D01)
A Window in Time: Interrogating Rapid Nanoscale Materials Processes with High Time Resolution In-situ Transmission Electron Microscopy

Dr. Thomas LaGrange

D02: Application of orientation contrast microscopy for the investigations of phase transformations and plastic deformation
D02.2: Investigation of deformation features using orientation contrast microscopy
Session starts at 16:45 Lecture
Assessment of a cyclic plasticity signature with SEM-EBSD

Dr.-Ing. Jeremie Bouquerel Prof. Jean-Bernard VOGT Floriane LEAUX Claire SCHAYES

D04: Small scale and in situ mechanical testing
D04.7: Other In-Situ Testing Techniques
Session starts at 16:45 Lecture
Yield Point Determination of Thin Metallic Films with Reflection Anisotropy Spectroscopy

Andreas Wyss Prof. Dr. Ralph Spolenak Dr. Alla Sologubenko Dr. Patric A. Gruber Nilesha Mishra

E01: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers
E01.2: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers II
Session starts at 16:45 Lecture
A Thermodynamic Approach to Represent the Interaction between Grain Coarsening and Second Phase Particles

Lukas Kertsch Dr. Dirk Helm

E02: Experimental and Computational Thermodynamics and Kinetics
E02.2: Oxides and Oxidation of Metals
Session starts at 16:45 Lecture
Experimental and thermodynamic descriptions of the binary systems in the BaO-SrO-CaO-MgO-Al2O3-SiO2 system

Rui Zhang Dr. Huahai Mao Prof. Dr. Pekka Taskinen

E07: Integrated Computational Materials Engineering (ICME) for Materials Design using Numerical Synchronized Approaches Linking Different Scale Algorithms
E07.2: Session 2
Session starts at 16:45 Lecture
A study on the effect of incorporation of microstructure information on macroscale finite element simulation of inter-critical annealing in Dual Phase Steel

John Deepu Hamidreza Farivar Pramod Zagade Danish Khan Gerald Rothenbucher Prof. Gandham Phanikumar Dr. Ulrich Prahl Dr. Ralph Bernhardt Dr. Gautham BP

F09: Materials for Bone Tissue Regeneration
F09.2: Session 2: Compatibility, Release and Interactivity of Materials for Bone Tissue Regeneration
Session starts at 16:45 Lecture
Engineering the spatial presentation of bone morphogenetic proteins and adhesive motifs at the cell-material interface.

Dr. Elisabetta Ada Cavalcanti-Adam Volker Martin Dr. Elisabeth Schwab Francesca Posa Dr. Giorgio Mori

17:30
A11: Hierarchical Materials
A11.2: Session 2
Session starts at 16:45 Lecture
Design and additive manufacture of advanced geometries with functional gradients of mechanical properties and controlled surface topographies

Prof. Dr. Andres Diaz Lantada Adrian De Blas Romero

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.2: Superalloys and Refractories
Session starts at 16:45 Lecture
Novel fully-lamellar Mo + Mo5Si3 eutectoid alloys by macro-alloying with Ti

Dr. Daniel Schliephake Dr. Alexander Kauffmann Xiangna Cong Prof. Dr. Martin Heilmaier

B09: Mechanical Properties and Microstructure
B09.2: Session 2
Session starts at 16:45 Lecture
Low Temperature Deformation and Work-Hardening Behavior of the High-Entropy Alloy FeMnNiCoCr

Dr. Alexander Kauffmann Hans Chen Dr. Klaus-Peter Weiss Dr. Bronislava Gorr Dr. Jens Freudenberger Prof. Martin Heilmaier

C07: Advanced technologies for the surface processing of sensitive materials
C07.2: Session 2
Session starts at 16:45 Lecture
Few-layer graphene nanostructures functionalized by radiation bridge-like defects as Li-storing cells

Prof. Dr. Arkadiy Ilyin Dr. Altynay Togambayeva Lazzat Toganbayeva

D02: Application of orientation contrast microscopy for the investigations of phase transformations and plastic deformation
D02.2: Investigation of deformation features using orientation contrast microscopy
Session starts at 16:45 Lecture
Formation conditions and genesis of the pearlitic ferrite fragmentation during pearlite transformation in proeutectoid steels.

Dipl.-Ing. Konstantin Vorkachev Dr. Matvey Kantor

D04: Small scale and in situ mechanical testing
D04.7: Other In-Situ Testing Techniques
Session starts at 16:45 Lecture
In-situ electro chemical micro cantilever bending test of bicrystal beams

Tarlan Hajilou Yun Deng Dr. Nousha Kheradmand Prof. Dr. Afrooz Barnoush

E01: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers
E01.2: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers II
Session starts at 16:45 Lecture
Phase field modeling of diffusion-limited precipitation in multi-component Ni-based superalloys

Dr. Michael Fleck Leslie T. Mushongera Frank Querfurth Markus Thäter Philipp Amendt Dr. Julia Kundin Prof. Dr. Heike Emmerich

E02: Experimental and Computational Thermodynamics and Kinetics
E02.2: Oxides and Oxidation of Metals
Session starts at 16:45 Lecture
Thermodynamic investigations of the Ti-Al-O ternary system

Dipl.-Ing. Mariia Ilatovskaia Dr. Olga Fabrichnaya

E07: Integrated Computational Materials Engineering (ICME) for Materials Design using Numerical Synchronized Approaches Linking Different Scale Algorithms
E07.2: Session 2
Session starts at 16:45 Lecture
2D-RVE simulation of stress-strain behavior of a strain-induced ferrite single phase following its kinetics of formation

Phillip Springer Dr. Ulrich Prahl Prof. Dr. Wolfgang Bleck

F09: Materials for Bone Tissue Regeneration
F09.2: Session 2: Compatibility, Release and Interactivity of Materials for Bone Tissue Regeneration
Session starts at 16:45 Lecture
Sustained release of bone morphogenetic protein 2 from its nanoparticular adhesive ternary complexes with cationic and anionic polysaccharides

Dr. Martin Müller David Vehlow Richard Petzold Mieke Luisa Möller Birgit Urban Dr. Ada Elisabetta Cavalcanti-Adam Prof. Volker Alt

17:45
B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.2: Superalloys and Refractories
Session starts at 16:45 Lecture
Multicomponent refractory alloys prepared from single sours precursors under mild conditions

Dr. Kirill Yusenko

B09: Mechanical Properties and Microstructure
B09.2: Session 2
Session starts at 16:45 Oral Poster
Microstructural and mechanical analysis of Mo-9Si-8B alloys with Al and Ge additions

Peter Kellner Dr. Rainer Völkl Prof. Dr. Uwe Glatzel

D01: Advanced and In-Situ Microscopies and Spectroscopies of Functional Nanostructures in Materials Science and Engineering
D01.2: Session 2 Dynamic and time-resolved TEM in MSE
Session starts at 16:45 Lecture
From beam sensitivity towards in situ electrochemistry in the TEM

Dr.-Ing. Venkata Sai Kiran Chakravadhanula Mohammed Hammad Mohammad Saleh Gorji Dr. Xiaoke Mu Dr. Christian Kübel

D02: Application of orientation contrast microscopy for the investigations of phase transformations and plastic deformation
D02.2: Investigation of deformation features using orientation contrast microscopy
Session starts at 16:45 Lecture
Local Two-Dimensional Measurement of Plasticity Induced Strain in Deformed Ni-base Superalloys

Julian Müller Florian Niekiel Prof. Dr. Erdmann Spiecker

D04: Small scale and in situ mechanical testing
D04.7: Other In-Situ Testing Techniques
Session starts at 16:45 Lecture
In-Situ Study of Mechanical Properties of Diffusion Aluminide Bond Coating at Elevated Temperature

Dr. Sanjit Bhowmick Dr. Eric Hintsala Dr. Syed Asif

E01: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers
E01.2: Microstructure and property evolution in applied materials: Aspects of chemo-mechanical coupling in metals and polymers II
Session starts at 16:45 Lecture
Effect of chemo-mechanical coupling on phase transformations in steel

Dr. Oleg Shchyglo Matthias Stratmann Prof. Dr. Ingo Steinbach

E02: Experimental and Computational Thermodynamics and Kinetics
E02.2: Oxides and Oxidation of Metals
Session starts at 16:45 Lecture
Effect of gas flow rate on oxidation behaviour of Ni-base alloys in wet gas - Modelling and experimental verification -

Dr. Pawel Huczkowski Dr. Anton Chyrkin Dr. Rishi Pillai Elham Hejrani Prof. Dr. Willem J. Quadakkers

E07: Integrated Computational Materials Engineering (ICME) for Materials Design using Numerical Synchronized Approaches Linking Different Scale Algorithms
E07.2: Session 2
Session starts at 16:45 Lecture
Micromechanical modeling of fatigue behavior of DP steels

Ghazal Moeini Dr. Ali Ramazani Prof. Ronald Larson Prof. Dr. Carsten Könke

F09: Materials for Bone Tissue Regeneration
F09.2: Session 2: Compatibility, Release and Interactivity of Materials for Bone Tissue Regeneration
Session starts at 16:45 Lecture
Co-relating osteocyte network to Implant Degradation and Bone - Implant Anchorage

Dr. Seemun Ray Dr. Thaqif El Khassawna Dr. Ulrich Thormann Dr. Ursula Sommer Prof. Dr. Michael Gelinsky Prof. Dr. Thomas Hanke Dr. Anja Henss Dr. Marcus Rohnke Prof. Dr. Christian Heiss Prof. Dr. Volker Alt

17:48
B09: Mechanical Properties and Microstructure
B09.2: Session 2
Session starts at 16:45 Oral Poster
Fracture behavior and mechanisms of ODS Steels

Aniruddh Das

17:51
B09: Mechanical Properties and Microstructure
B09.2: Session 2
Session starts at 16:45 Oral Poster
Investigation of the eccentricity and residual stresses variations due to the tilting of the die in tube drawing process for steel tubes

Farzad Foadian Dr. Adele Carradó Prof. Dr. Heinz Palkowski

17:54
B09: Mechanical Properties and Microstructure
B09.2: Session 2
Session starts at 16:45 Oral Poster
Environmentally-assisted intergranular cracking in a high strength Nickel-based superalloy

André Németh Dr. David Crudden Dr. David Collins Prof. Dr. Roger Reed Dr. David Armstrong

Thursday (29.09.2016)

09:15
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.1: Novel Functional Materials I
Session starts at 09:15 Keynote Lecture
Bonding of III-V semiconductors on patterned Si for photonics

Prof. Dr. Eric Le Bourhis

A09: Shape Memory Alloys - Basics and Applications
A09.1: Structure-property relationships in SMAs
Session starts at 09:15 Lecture
Cu-based shape memory alloys processed by selective laser melting

Dr.-Ing. Simon Pauly Tobias Gustmann Jonadabe Martins dos Santos Prof. Piter Gargarella Dr. Uta Kühn

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.3: Emerging Intermetallics
Session starts at 09:15 Lecture
Deformation behavior and solid solution hardening of Al-containing refractory high-entropy alloys

Dipl.-Ing. Hans Chen Dr. Alexander Kauffmann Daniel Schliephake Christoph Seemüller Dr. Bronislava Gorr Prof. Dr. Hans-Jürgen Christ Dr. Julia N. Wagner Prof. Dr. Martin Heilmaier

B07: Bulk Ultrafine- and Nano-structured Materials
B07.1: Fundamental Aspects
Session starts at 09:15 Keynote Lecture
Excess volume and defect annealing in HPT- and ECAP-processed ultrafine-grained Ni studied by difference dilatometry

Prof. Dr. Roland Würschum Jaromir Kotzurek Dr. Anton Hohenwarter Dr. Macej Krystian Prof. Dr. Wolfgang Sprengel Prof. Dr. Reinhard Pippan

B08: Hybrid Structures and Materials
B08.1: Hybrid Structural Materials
Session starts at 09:15 Lecture
Development of a highly sensitive strain sensor consisting of a nickel-carbon composite for new hybrid laminates

Christos Karapepas Prof. Dr. Daisy Nestler Prof. Dr. Guntram Wagner

B09: Mechanical Properties and Microstructure
B09.3: Session 3
Session starts at 09:15 Lecture
Size effects and micromechanical testing of Fe-P amorphous/crystalline multilayer structures

Dr. Timo Müller Dr. Andrea Bachmaier Dr. Thomas Schöberl Prof. Dr. Reinhard Pippan

B12: Influence of the microstructure on hydrogen embrittlement and localised corrosion of steels
B12.1: Hydrogen embrittlement and delayed cracking of steels
Session starts at 09:15 Highlight Lecture
Micromechanical Modeling of Hydrogen Embrittlement in Martensitic Steel

Prof. Dr. Alexander Hartmaier Dr. Philipp Schwittek

C02: Nanomaterials and Composites
C02.1: Session 1
Session starts at 09:15 Keynote Lecture
Carbon-Metal Oxides Nanocomposites by Atomic Layer Deposition

Prof. Dr. Nicola Pinna

D01: Advanced and In-Situ Microscopies and Spectroscopies of Functional Nanostructures in Materials Science and Engineering
D01.3: Session 3 Environmental TEM, Low voltage EM, and in situ (S)TEM in MSE
Session starts at 09:15 Keynote Lecture
Recent Applications of In Situ and Environmental Transmission Electron Microscopy for Material Reactions.

Prof. Dr. Robert Sinclair

E02: Experimental and Computational Thermodynamics and Kinetics
E02.3: Metal Systems
Session starts at 09:15 Lecture
Experimental investigation and thermodynamic modelling of internal oxidation of Fe-Cr-Al alloys

Seyedhossein Miran Dr. Peter Franke Prof. Dr. Hans Jürgen Seifert

E03: Multiscale description of advanced materials properties
E03.1: Atomistic simulations of materials' structure and dynamics
Session starts at 09:15 Keynote Lecture
Low-dimensional materials: interplay between theory and experiment

Prof. Dr. Marek Sierka

E04: Atomistic to Mesoscale Modelling and Characterization of Materials for Energy Applications
E04.1: Energy materials and advanced ceramics
Session starts at 09:15 Keynote Lecture
Characterization and Multiscale Simulation of Particle Systems for High Performance Ceramic Materials

Dr.-Ing. Stefan Rasche Dr. Arshad Tahir Prof. Dr. Carsten Könke

F03: Biomaterials Applications
F03.1: Session 1
Session starts at 09:15 Lecture
Characterization of pelvic floor ligaments for the development of mesh materials to treat pelvic organ prolapse

Adwoa Baah-Dwomoh Dr. Raffaella De Vita

F04: Bio-inspired Materials
F04.1: Session 1
Session starts at 09:15 Lecture
Acid-base properties of PDMPO and its use in the study of (bio)silicification

Prof. Carole C. Perry Mithun Parambath Dr. Quentin Hanley Dr. Tristan Giesa Dr. Francisco Martin-Martinez Prof. Markus Buehler

09:30
A09: Shape Memory Alloys - Basics and Applications
A09.1: Structure-property relationships in SMAs
Session starts at 09:15 Lecture
Low-temperature creep and stress relaxation behavior of FeMnSi based shape memory alloys for prestressing applications

Dr. Ariyan Arabi-Hashemi Dr. Wook-Jin Lee Dr. Benedikt Weber Dr. Adrian Lis Dr. Christian Leinenbach

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.3: Emerging Intermetallics
Session starts at 09:15 Lecture
Room temperature deformation mechanisms in the Mg2Ca Laves phase and a Mg-Mg2Ca alloy

Christoffer Zehnder Sebastian Schröders Dr. James Gibson Dr. Stefanie Sandlöbes Prof. Dr. Sandra Korte-Kerzel

B08: Hybrid Structures and Materials
B08.1: Hybrid Structural Materials
Session starts at 09:15 Lecture
Characterisation of the Energy Release Rate GIC and GIIC of Fibre Metal Laminates Consisting of GFRP and Permeable Metal Plies

Björn Bosbach Prof. Bodo Fiedler

B09: Mechanical Properties and Microstructure
B09.3: Session 3
Session starts at 09:15 Lecture
Determination of mechanical degradation of FeAl coatings at high temperatures

Ceyhun Oskay Dr. Mathias Christian Galetz Dr. Mario Rudolphi Prof. Dr. Michael Schütze

B12: Influence of the microstructure on hydrogen embrittlement and localised corrosion of steels
B12.1: Hydrogen embrittlement and delayed cracking of steels
Session starts at 09:15 Lecture
Crystallographic study of hydrogen-induced fatigue crack growth in type 304 austenitic stainless steel

Dr. Yoji Mine Shohei Ueki Prof. Dr. Kazuki Takashima

E02: Experimental and Computational Thermodynamics and Kinetics
E02.3: Metal Systems
Session starts at 09:15 Lecture
Phase equilibria and quenched phases in the Ti–Al–Mo system

Dr.-Ing. Mario J. Kriegel Prof. Dr. Jens Freudenberger Dr. Volker Klemm Dr. Olga Fabrichnaya Prof. Dr. Andreas Leineweber Prof. Dr. David Rafaja

F03: Biomaterials Applications
F03.1: Session 1
Session starts at 09:15 Lecture
Fatigue and Fracture of Wire-Based Systems used in Biomedical Applications

Janet Gbur John Lewandowski

F04: Bio-inspired Materials
F04.1: Session 1
Session starts at 09:15 Lecture
Molecular Mechanism of Crystal Growth Inhibition at the Calcium Oxalate/Water Interfaces

Dr. Marialore Sulpizi Leila Salimi Parvaneh Prof. Dr. Davide Donadio

09:45
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.1: Novel Functional Materials I
Session starts at 09:15 Lecture
Flux Growth and Photocatalytic Water Oxidation Activity of Ta-Substituted BaNbO2N Crystals

Dr. Mirabbos Hojamberdiev Prof. Hajime Wagata Prof. Kunio Yubuta Prof. Shuji Oishi Prof. Kazunari Domen Prof. Katsuya Teshima

A09: Shape Memory Alloys - Basics and Applications
A09.1: Structure-property relationships in SMAs
Session starts at 09:15 Lecture
On austenite-martensite interface evolution in pseudoelastic NiTi ribbons

Steffen Pfeiffer Prof. Dr. Martin F.-X. Wagner

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.3: Emerging Intermetallics
Session starts at 09:15 Lecture
Investigation of environmental embrittlement of Fe3Al using micro-fracture testing

Dr. Bjørn Rune Rogne Prof. Dr. Afrooz Barnoush

B07: Bulk Ultrafine- and Nano-structured Materials
B07.1: Fundamental Aspects
Session starts at 09:15 Lecture
Severe Plastic Deformation of CuZn and CuSn Solid Solutions - Influence of Stacking Fault Energy and Solid Solution Strengthening

Paul Braun Dr. Enrico Bruder Prof. Dr. Karsten Durst

B08: Hybrid Structures and Materials
B08.1: Hybrid Structural Materials
Session starts at 09:15 Lecture
Metallic-Ceramic Multi-Material Composite for Protection from Forcible Entry

Dr. Stefan Szyniszewski Kilian Fivaesh Dr. Rene Vogel Dr. Thomas Hipke

B09: Mechanical Properties and Microstructure
B09.3: Session 3
Session starts at 09:15 Lecture
Mechanical performance of Mo2BC coatings

Dr. Soundes Djaziri Stephan Gleich Dr. Muhammad Junaid Dr. Christoph Kirchlechner Prof. Christina Scheu Prof. Jochen M. Schneider Prof. Gerhard Dehm

B12: Influence of the microstructure on hydrogen embrittlement and localised corrosion of steels
B12.1: Hydrogen embrittlement and delayed cracking of steels
Session starts at 09:15 Lecture
Fatigue crack growth properties of hydrogen-charged ductile cast iron

Dr. Bernd Schönbauer Dr. Takashi Matsuo

C02: Nanomaterials and Composites
C02.1: Session 1
Session starts at 09:15 Lecture
High strength Al matrix composites produced by combination of reactive ball milling and spark plasma sintering techniques

Konstantin Firestein Alexander Steinman Dr. Andrey Kovalskii Dr. Andrei Matveev Prof. Dr. Dmitri Golberg Prof. Dr. Dmitry Shtansky

D01: Advanced and In-Situ Microscopies and Spectroscopies of Functional Nanostructures in Materials Science and Engineering
D01.3: Session 3 Environmental TEM, Low voltage EM, and in situ (S)TEM in MSE
Session starts at 09:15 Keynote Lecture
The Rise of Low Voltage Electron Microscopy for Quantum Materials Research

Prof. Dr. David Bell Dr. Felix VonCube

E02: Experimental and Computational Thermodynamics and Kinetics
E02.3: Metal Systems
Session starts at 09:15 Lecture
Thermodynamic Modeling of the Al-Mn-C system

Florian Tang Dr. Bengt Hallstedt Iuliia Fartushna Irina Bajenova Dr. Alexandra Khvan

E03: Multiscale description of advanced materials properties
E03.1: Atomistic simulations of materials' structure and dynamics
Session starts at 09:15 Highlight Lecture
On the Stability of Lamellar Growth During Discontinuous Precipitation: A Phase-Field Simulation

Prof. Lynda Amirouche Prof. Dr. Mathis Plapp

E04: Atomistic to Mesoscale Modelling and Characterization of Materials for Energy Applications
E04.1: Energy materials and advanced ceramics
Session starts at 09:15 Highlight Lecture
Hybrid fuel cells with carbonate/oxide composite electrolytes: a combined experimental and modeling strategy

Dr. Labat Frederic Chiara Ricca Dr. Armelle Ringuedé Prof. Michel Cassir Prof. Carlo Adamo

F03: Biomaterials Applications
F03.1: Session 1
Session starts at 09:15 Lecture
Mechanical properties of Ti-Nb-Zr-Ta-O biomedical alloy

Ph.D. Josef Strásky Kristina Vaclavova Dalibor Preisler Dr. Petr Harcuba Prof. Milos Janecek

F04: Bio-inspired Materials
F04.1: Session 1
Session starts at 09:15 Lecture
Large-scale nacre-inspired composites by centrifugation-assisted sedimentation

Sebastian Behr Prof. Dr. Gerold A. Schneider

10:00
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.1: Novel Functional Materials I
Session starts at 09:15 Lecture
Effect of scandium content on structure and piezoelectric properties of AlScN films

Dr. Olaf Zywitzki Dr. Thomas Modes Dr. Stephan Barth Dr. Hagen Bartzsch Dr. Peter Frach

A09: Shape Memory Alloys - Basics and Applications
A09.1: Structure-property relationships in SMAs
Session starts at 09:15 Lecture
Stress relaxation in martensitic NiTi during uniaxial tensile testing

Dipl.-Ing. Cagatay Elibol Prof. Dr. Martin F.-X. Wagner

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.3: Emerging Intermetallics
Session starts at 09:15 Lecture
Challenging Nitridation at High Temperatures: the role of A15-Intermetallics

Ali Solimani Prof. Mathias C. Galetz

B07: Bulk Ultrafine- and Nano-structured Materials
B07.1: Fundamental Aspects
Session starts at 09:15 Lecture
Insights into plasticity induced grain boundary migration in ultrafine-grained metals

Dr. Oliver Renk Dr. Pradipta Ghosh Prof. Dr. Reinhard Pippan

B08: Hybrid Structures and Materials
B08.1: Hybrid Structural Materials
Session starts at 09:15 Lecture
A numerical and experimental analysis of a rotary swaging process for manufacturing smart structures

Martin Krech Prof. Dr. Peter Groche

B09: Mechanical Properties and Microstructure
B09.3: Session 3
Session starts at 09:15 Lecture
The Role of Oxygen in the Fatigue Behaviour of Ti-6Al-7Nb Processed by Metal Injection Moulding

Alexandra Amherd Hidalgo Dr. Thomas Ebel Prof. Dr. Florian Pyczak Wolfgang Limberg Dr. Robert Frykholm Benjamin Brash Prof. Dr. Efraín Carreño-Morelli

B12: Influence of the microstructure on hydrogen embrittlement and localised corrosion of steels
B12.1: Hydrogen embrittlement and delayed cracking of steels
Session starts at 09:15 Lecture
Modeling the influence of hydrogen on the short fatigue crack growth in a metastable austenitic stainless steel

Volker Schippl Claus-Peter Fritzen Sven Brück Hans-Jürgen Christ

C02: Nanomaterials and Composites
C02.1: Session 1
Session starts at 09:15 Lecture
Innovative surface modification methods for the fabrication of metal coated particles via electroless metal deposition

Dr. Julia Grothe Prof. Dr. Stefan Kaskel

E02: Experimental and Computational Thermodynamics and Kinetics
E02.3: Metal Systems
Session starts at 09:15 Lecture
Thermodynamic and kinetic modeling for multicomponent cemented carbides and their applications

Dr. Weibin Zhang Prof. Dr. Yong Du Dr. Yingbiao Peng Dr. Peng Zhou Dr. Na Li

E03: Multiscale description of advanced materials properties
E03.1: Atomistic simulations of materials' structure and dynamics
Session starts at 09:15 Lecture
Crystallography and thermodynamics of bcc nucleation in fcc-Fe by molecular dynamics simulation

Ph.D. Xiaoqin Ou Prof. Jilt Sietsma Dr. Maria J. Santofimia

E04: Atomistic to Mesoscale Modelling and Characterization of Materials for Energy Applications
E04.1: Energy materials and advanced ceramics
Session starts at 09:15 Lecture
First principles structure prediction and NMR study of lithium/sodium ion batteries anodes

Dipl.-Ing. Martin Mayo Kent J. Griffith Prof. Chris J. Pickard Prof. Clare P. Grey

F03: Biomaterials Applications
F03.1: Session 1
Session starts at 09:15 Lecture
Phase transformations and electrochemical stability of TiO2 nanotubes films grows in beta metastable titanium alloys

Prof. Dr. Alessandra Cremasco Prof. Dr. Rodrigo Jose Contieri Prof. Dr. Ricardo Floriano Alberto Zanesco Fatichi Raphael Yudi Matsukuma

F04: Bio-inspired Materials
F04.1: Session 1
Session starts at 09:15 Lecture
The Underlying Mechanism of Variation of Bamboo Microfibril Mechanical Properties with Water Molecules

Dr. Sina Youssefian Prof. Nima Rahbar

10:15
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.1: Novel Functional Materials I
Session starts at 09:15 Lecture
Growth and characterization of ZnO micro- and nanostructures synthetized from spent batteries.

Dr. Teresa Cebriano Dr. Irene García-Díaz Dr. Olga Rodríguez Ana López-Fernández Dr. Germán Escalante Prof. Dr. Paloma Fernández Prof. Dr. Félix Antonio López

A09: Shape Memory Alloys - Basics and Applications
A09.1: Structure-property relationships in SMAs
Session starts at 09:15 Lecture
An experimental and theoretical study on the role of copper interlayers for the microstructure of NiTi thin films on graphene substrates

Sandra Hahn Marcus Böhme Marc Pügner Dr. Torsten Hahn Prof. Dr. Martin F.-X. Wagner

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.3: Emerging Intermetallics
Session starts at 09:15 Lecture
Intermetallic interface layers in dissimilar Friction Stir Welding joints

Roland Marstatt Markus Krutzlinger Johannes Luderschmid Prof. Dr. Ferdinand Haider Prof. Dr. Michael F. Zaeh

B07: Bulk Ultrafine- and Nano-structured Materials
B07.1: Fundamental Aspects
Session starts at 09:15 Lecture
Magnetic Hardening by combination of Equal-Channel Angular Swaging and Rotary Swaging

Thorsten Gröb Lennart Wießner Prof. Peter Groche Dr. Enrico Bruder Prof. Clemens Müller

B08: Hybrid Structures and Materials
B08.1: Hybrid Structural Materials
Session starts at 09:15 Lecture
Derivation of a stress optimized hybrid construction based on an analytical model

Michael Knorre Prof. Dr. Robert Brandt Arne Busch

B09: Mechanical Properties and Microstructure
B09.3: Session 3
Session starts at 09:15 Lecture
Introducing Hysitron´s TI 980 TriboIndenter® Nanomechanical Test Instrument

David Vodnick

B12: Influence of the microstructure on hydrogen embrittlement and localised corrosion of steels
B12.1: Hydrogen embrittlement and delayed cracking of steels
Session starts at 09:15 Lecture
In-situ observation of hydrogen effects on short fatigue crack growth in a metastable austenitic stainless steel

Sven Brück

C02: Nanomaterials and Composites
C02.1: Session 1
Session starts at 09:15 Lecture
Investigation of Li and Mg borates interaction with ammonia toward BN nanostructures synthesis

Alexander Steinman Dr. Andrey Matveev Konstantin Firestein Dr. Andrey Kovalskii Irina Sukhorukova Prof. Dr. Dmitri Golberg Prof. Dr. Dmitry Shtansky

D01: Advanced and In-Situ Microscopies and Spectroscopies of Functional Nanostructures in Materials Science and Engineering
D01.3: Session 3 Environmental TEM, Low voltage EM, and in situ (S)TEM in MSE
Session starts at 09:15 Highlight Lecture (Symp. D01)
In situ TEM studies of fundamental processes in thin films using chip-based heating systems

Prof. Dr. Erdmann Spiecker Florian Niekiel Simon Kraschewski

E02: Experimental and Computational Thermodynamics and Kinetics
E02.3: Metal Systems
Session starts at 09:15 Lecture
Sound velocity as a tool for phase diagram analysis under pressure

Ph.D. Moran Emuna Dr. Yaron Greenberg Dr. Eyal Yahel Prof. Guy Makov

E03: Multiscale description of advanced materials properties
E03.1: Atomistic simulations of materials' structure and dynamics
Session starts at 09:15 Lecture
Nanoindentation in single-crystalline Fe: Microstructure and magnetic disorder

Dr. Andreas Mutter Dr. Binjun Wang Dr. YU Gao Dr. Herbert, M. Urbassek

E04: Atomistic to Mesoscale Modelling and Characterization of Materials for Energy Applications
E04.1: Energy materials and advanced ceramics
Session starts at 09:15 Lecture
A constitutive model for orthotropic damage in an all oxide woven ceramic matrix composite material

Neraj Jain Dr. Severin Hofmann Prof. Dr. Dietmar Koch Dr. Ivaylo Vladimirov Dr. Jürgen Göring

F03: Biomaterials Applications
F03.1: Session 1
Session starts at 09:15 Lecture
Electrophoretic deposition of multifunctional chitosan- bioactive glass composite coatings with drug delivery capability

Prof. Dr. Aldo R. Boccaccini

F04: Bio-inspired Materials
F04.1: Session 1
Session starts at 09:15 Lecture
Smart shape changing wood elements for climate adaptive building shells

Ph.D. Chiara Vailati Dr. Markus Rüggeberg Prof. Dr. Ingo Burgert

10:30
A09: Shape Memory Alloys - Basics and Applications
A09.1: Structure-property relationships in SMAs
Session starts at 09:15 Lecture
Microstructural characteristics and functional behavior of Fe-Mn-Al-Ni

Malte Vollmer Philipp Krooß Dr. Mario Kriegel Prof. Dr. Ibrahim Karaman Dr. Anja Weidner Prof. Dr. Horst Biermann Prof. Dr. Thomas Niendorf

B04: Intermetallics: Physical Metallurgy, Processing and Characterisation
B04.3: Emerging Intermetallics
Session starts at 09:15 Lecture
In situ high-energy XRD study of the effect of borides on the beta/alpha phase transformation kinetics in gamma titanium aluminide alloys

Dr. Michael Oehring Dr. Andreas Stark Marcus Rackel Dr. Norbert Schell Prof. Dr. Florian Pyczak Prof. Dr. Andreas Schreyer

B07: Bulk Ultrafine- and Nano-structured Materials
B07.1: Fundamental Aspects
Session starts at 09:15 Lecture
Influence of Free Surface on the Deformation Behaviour of ultrafine-grained Chromium at Ambient & Elevated Temperatures

Prof. Dr. Daniel Kiener Reinhard Fritz Alexander Leitner Dr. Verena Maier-Kiener

B08: Hybrid Structures and Materials
B08.1: Hybrid Structural Materials
Session starts at 09:15 Lecture
High-performance thermoplastic composite in its rubber-like state for one helicopter-engine application.

Ph.D. Thomas Borgna Prof. Dr. Christophe Derail Dr. Hugues Alglave Marie-Pierre Ratel Dr. Cédric Thomas

B12: Influence of the microstructure on hydrogen embrittlement and localised corrosion of steels
B12.1: Hydrogen embrittlement and delayed cracking of steels
Session starts at 09:15 Lecture
Multi-scale and spatially resolved hydrogen mapping: Example of a Ni-Nb model alloy

Dr.-Ing. Zahra Tarzimoghadam Dr. Michael Rohwerder Dr. Sergiy V. Merzlikin Dr. Asif Bashir Dr. Lluis Yedra Dr. Santhana Eswara Dr. Dirk Ponge Prof. Dr. Dierk Raabe

C02: Nanomaterials and Composites
C02.1: Session 1
Session starts at 09:15 Lecture
Low temperature belite binder as energy-saving alternative of ordinary portland cement

Bettina Lohs Tim Link

E02: Experimental and Computational Thermodynamics and Kinetics
E02.3: Metal Systems
Session starts at 09:15 Lecture
Experimental investigation and thermodynamic modeling of the Al-Cr-Mo-Ni system

Dr. Jian Peng Dr. Peter Franke Dr. Dario Manara Prof. Dr. Rudy Konings Prof. Dr. Hans Seifert

E04: Atomistic to Mesoscale Modelling and Characterization of Materials for Energy Applications
E04.1: Energy materials and advanced ceramics
Session starts at 09:15 Oral Poster
First-principles design of a borocarbonitride-based anode for superior performance in sodium-ion batteries and capacitors

Dr. Siamkhanthang Neihsial

F03: Biomaterials Applications
F03.1: Session 1
Session starts at 09:15 Lecture
Exploiting bisphosphonate-bioactive glass interaction for development of bioactive and self-healing composite hydrogels

Mani Diba Dr. Jie An Prof. Dr. Stephan Schmidt Prof. Dr. Aldo Boccaccini Prof. Dr. Sander Leeuwenburgh

F04: Bio-inspired Materials
F04.1: Session 1
Session starts at 09:15 Lecture
Bio-Inspired 3D Printed Hygroscopic Responsive Systems

David Correa

10:33
E04: Atomistic to Mesoscale Modelling and Characterization of Materials for Energy Applications
E04.1: Energy materials and advanced ceramics
Session starts at 09:15 Oral Poster
Diffusion properties of anode metals studied using DFT: growth phenomena and the effect of an electric field

Markus Jäckle Prof. Dr. Axel Groß

10:36
E04: Atomistic to Mesoscale Modelling and Characterization of Materials for Energy Applications
E04.1: Energy materials and advanced ceramics
Session starts at 09:15 Oral Poster
Ab initio molecular dynamics simulation of a glass-electrolyte with high ionic conductivity and dielectric constant

Prof. Maria Helena Braga Prof. Dr. John B. Goodenough

10:39
E04: Atomistic to Mesoscale Modelling and Characterization of Materials for Energy Applications
E04.1: Energy materials and advanced ceramics
Session starts at 09:15 Oral Poster
Thermodynamic calculations in the Y-Si-C-O-H system - Phase stability and corrosion resistance of Yttrium-Silicate EBCs on SiC in moist atmosphere

Ingo Markel Dr. Damian M. Cupid Dr. Martin Steinbrück Prof. Dr. Hans J. Seifert

11:15
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.2: Novel Functional Materials II
Session starts at 11:15 Keynote Lecture
Vertical architecture for the next generation of microelectronic memories: from the materials point of view

Prof. Paula Vilarinho Prof. Dr. Paula Vilarinho

A09: Shape Memory Alloys - Basics and Applications
A09.2: High-temperature SMAs
Session starts at 11:15 Lecture
Impact of the Hf content on the energetics and elastic properties of NiTi1-xHfx studied from first principles

Mohammad Dehghani Dr. Juergen Spitaler Prof. Dr. Peter Puschnig Prof. Dr. Andrei Ruban

B07: Bulk Ultrafine- and Nano-structured Materials
B07.2: Microstructure and Mechanical Properties I
Session starts at 11:15 Highlight Lecture
Mechanical behaviour of ultrafine grained metastable CrMnNi steel

Dr.-Ing. Anja Weidner Karin Fischer Dr. Ivo Kubena Prof. Dr. Tomas Kruml Prof. Dr. Horst Biermann

B08: Hybrid Structures and Materials
B08.2: Hybrid Material Systems
Session starts at 11:15 Lecture
Improvements in production and processing of Al-Mg compounds

Dipl.-Ing. Wolfgang Förster Dr. Carolin Binotsch Prof. Dr. Birgit Awiszus

B09: Mechanical Properties and Microstructure
B09.4: Session 4
Session starts at 11:15 Lecture
Evolution of copper-rich segregation in Al9FeNi (T-phase) of Al-Si-Cu-Ni-Mg piston alloys

Nicole Engl Dr. Heinz Werner Höppel Prof. Dr. Mathias Göken

B12: Influence of the microstructure on hydrogen embrittlement and localised corrosion of steels
B12.2: Influence of the microstructure on corrosion properties of steels
Session starts at 11:15 Highlight Lecture
Understanding the corrosion behavior of a stainless steel in a salt melt for solar thermal power plants using pseudo 3D EBSD and ab initio calculation

Zhangqi Wang Dr. Stefan Zaefferer Dr. Rebecca Janisch

C02: Nanomaterials and Composites
C02.2: Session 2
Session starts at 11:15 Lecture
Investigating the microwave based heat pressing of commingled yarns made from nanomodified polypropylene and glass fibres

Robert Brüll Klaus Vonberg Dr. Gunnar Seide Prof. Dr. Thomas Gries

D01: Advanced and In-Situ Microscopies and Spectroscopies of Functional Nanostructures in Materials Science and Engineering
D01.4: Session 4 Functional nanomaterials and devices
Session starts at 11:15 Keynote Lecture
Resolving the interplay of nanostructure and mechanical properties by advanced electron microscopy

Prof. Dr. Gerhard Dehm

E02: Experimental and Computational Thermodynamics and Kinetics
E02.4: First Principles
Session starts at 11:15 Lecture
Running Statistical Mechanics "In Reverse": Converting High-Temperature Measurements into 0 Kelvin Predictions

Elizabeth Decolvenaere Prof. Michael Gordon Prof. Anton Van der Ven

E03: Multiscale description of advanced materials properties
E03.2: From atomic scale up: multiscale modelling
Session starts at 11:15 Keynote Lecture
Atomistic Modelling of Self-Assembly Kinetics of Complex Structures

Dr. Gilles Demange Dr. Mykola Lavrskyi Reanud Patte Prof. Helena Zapolsky

E04: Atomistic to Mesoscale Modelling and Characterization of Materials for Energy Applications
E04.2: Nano-reinforced soft matter
Session starts at 11:15 Keynote Lecture
Multi-scale modelling and analysis framework of nano particle reinforced soft matter

Prof. Dr. Stefanie Reese Deepanshu Sodhani

F03: Biomaterials Applications
F03.2: Session 2
Session starts at 11:15 Lecture
Mechanical spectroscopy of retina explants at the protein level employing nanostructured scaffolds

Dr. Mareike Zink Prof. Dr. Stefan G. Mayr

F04: Bio-inspired Materials
F04.2: Session 2
Session starts at 11:15 Lecture
An ontology-based exploration of biological structures and functions by use of historical biological data

Dr. Friederike Saxe Dr. Michael Dürfeld Linda Winkler Markus Mandalka Philipp Schröter Anne Lange Anika Schultz Christian Köhler Dr. Clemens Schmitt Prof. Dr. Wolfgang Schäffner Prof. Dr. Peter Fratzl

F05: SPP 1569 Generation of Multifunctional Inorganic Materials by Molecular Bionics
F05.1: Session 1
Session starts at 11:15 Keynote Lecture
Sustainable fabrication of self-organized meso/nanostructures

Prof. Dr. Mady Elbahri

11:30
A09: Shape Memory Alloys - Basics and Applications
A09.2: High-temperature SMAs
Session starts at 11:15 Lecture
Ab-initio investigation of Ti-Ta high temperature shape memory alloys

Tanmoy Chakraborty Dr. Jutta Rogal Prof. Dr. Ralf Drautz

B07: Bulk Ultrafine- and Nano-structured Materials
B07.2: Microstructure and Mechanical Properties I
Session starts at 11:15 Lecture
Heterogeneous Nanostructure and Superior Mechanical Properties of Heavily Cold-Rolled Stainless Steels

Prof. Dr. Hiromi Miura Prof. Dr. Masakazu Kobayashi

B08: Hybrid Structures and Materials
B08.2: Hybrid Material Systems
Session starts at 11:15 Lecture
Incorporating nanoporous particles (NpP) into the conventional hydrogelsa to develop ultra-tough hydrogel with programmable toughness

Leila Khalili Dr. Roozbeh Dargazany

B09: Mechanical Properties and Microstructure
B09.4: Session 4
Session starts at 11:15 Lecture
The effect of the microstructure on thermo-mechanical behaviour of Al-Si alloys

Dr. Robert Koos

B12: Influence of the microstructure on hydrogen embrittlement and localised corrosion of steels
B12.2: Influence of the microstructure on corrosion properties of steels
Session starts at 11:15 Lecture
Nucleation and Growth of Sulfur Phases in Grain Boundaries

Kathrin Nützmann Maria Mosquera Feijoo

C02: Nanomaterials and Composites
C02.2: Session 2
Session starts at 11:15 Lecture
New route to green synthesis CdSe quantum dots

Andrey Mitrofanov

E02: Experimental and Computational Thermodynamics and Kinetics
E02.4: First Principles
Session starts at 11:15 Lecture
Ab-initio investigation of the anomalous thermodynamic behavior of W-Re alloys

Jürgen Spitaler Thomas Dengg Dr. Vsevolod Razumovskiy Dr. Lorenz Romaner Prof. Dr. Peter Puschnig

F03: Biomaterials Applications
F03.2: Session 2
Session starts at 11:15 Lecture
Nanomechanical and viscoelastic measurements in biological Atomic Force Microscopy (AFM)

Dr. Florian Johann Dr. Sophia Hohlbauch Dr. Nicholas Geisse

F04: Bio-inspired Materials
F04.2: Session 2
Session starts at 11:15 Lecture
Bioinspired Anti-Icing Surface Materials

Prof. Dr. Jianjun Wang

11:45
A05: Semiconductor materials at the nano- and microscale for novel applications
A05.2: Novel Functional Materials II
Session starts at 11:15 Highlight Lecture
Low Voltage Scanning Electron Microscopy (LVSEM) with the EsB Detector: Applications in Microelectronics and Photovoltaics

Aránzazu Garitagoitia Cid Mona Sedighi Dr. Markus Loeffler Dr. Willem F. van Dorp Dr. Rüdiger Rosenkranz Prof. Dr. Ehrenfried Zschech

A09: Shape Memory Alloys - Basics and Applications
A09.2: High-temperature SMAs
Session starts at 11:15 Lecture
Processing and Functional Stability of Ti-Ta High Temperature Shape Memory Alloys

Alexander Paulsen Dr. Ramona Rynko Dr. Christoph Somsen Dr. Jan Frenzel Prof. Dr. Gunther Eggeler